Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 3/4".
Color: Black.

Mounting hardware kit for single SR control.
Includes instructions. 

Cable clevis, pin, & cotter pin for 30 series control cable.
Pin diameter: 5/16".
Plated steel.

Fire retardant marine fuel hose. Designed for use with alcohol-enhanced gasoline. Reinforced with 2 spirals of high-strength synthetic fabric. Helical wire imbedded between fabric for kink resistance. Diameter: 2-3/8".

Single layer vinyl, non toxic clear tubing. FDA approved. Useful for sink, cooler, or livewell drain line. Not recommended for hot water. Diameter: 1/2".

Single layer vinyl, non toxic clear tubing. FDA approved. Useful for sink, cooler, or livewell drain lines. Not recommended for hot water. Diameter: 1/4".

For Morse 60 series control systems. Diameter: 1/2".

30 series.
Stud diameter: 1/4".
Lever thickness: 1/8".
Length: 5/8".

Single layer vinyl, non toxic clear tubing. FDA approved. Useful for sink, cooler, or livewell drain lines. Not recommended for hot water. Diameter: 3/4".

Single layer vinyl, non toxic clear tubing. FDA approved. Useful for sink, cooler, or livewell drain lines. Not recommended for hot water. Diameter: 3/16".

Single layer vinyl, non toxic clear tubing. FDA approved. Useful for sink, cooler, or livewell drain lines. Not recommended for hot water. Diameter: 3/8".

30 series.
Stud diameter: 1/4".
Lever thickness: 9/32".
Length: 25/32".

Cable clevis, pin, & cotter pin for 30 series control cable.
Pin diameter: 1/4"
Plated steel.

Ball joint with quick release stud.
Plated steel.
For 30 series cable.
1/4" stud.

Fire-retardant marine fuel hose. Resists alcohol-enhanced gasolines. High nitrile rubber construction. Reinforced with two spirals of synthetic fabric. Diameter: 3/8". 250 feet per spool.

Single-lever, dual action - throttle and shift.  
Sturdy control provides one-handed positive engine
control.
Neutral warm-up is done by pulling out the hand
levers in the neutral position.
Built-in friction drag helps reduce slippage and
throttle creep while underway.
Includes hardware for 33C control cables.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 26'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 28'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 20'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 15'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 14'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 16'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 10'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 13'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 12'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 18'.

Front-mount balanced cylinder for outboards.  
Designed for single/twin non-power assisted engines.  
Ultra corrosion-resistant construction.  
Rigid tilt tube mount.  
Pivoted tiller connection.  
Integral bleeding fittings.
Bore: 1.375"
Shaft diameter: .75"
Stroke: 8"
Volume: 8.34 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports.
Seal kit: HS5157

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 3". Length: 12.5 feet.

SeaStar sterndrive steering cylinder.
For non-power assist steering configurations.
Bore: 1.25"
Shaft diameter: .50”
Stroke: 7”
Volume: 8.3 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports. 
Seal kit: HS5154

For sanitation system connections. Multi-purpose, smooth-walled hose. For bilge, drain, or potable water uses. Temperature range: -13° to 158° F. Diameter: 5/8".

Power assist sterndrive cylinder.
For use with specific Volvo sterndrives.  
Bore: 1.25"
Shaft diameter: .50"
Stroke: 8"
Volume: 8.3 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports.
Seal kit: HS5154

Shieldsflex II marine water/exhaust hose.
Black synthetic rubber tube and cover.
Reinforced with a wire helix imbedded in HD synthetic cord.
Resistant to exhaust fumes, mild chemicals, ozone, antifreeze, and saltwater.
Abrasion and odor permeation resistant.
Primarily used for engine intake, wet exhaust connections, bilge pump intake, scupper lines, toilet exchange / discharge and more.
Meets SAE J2006 type R2 standards.
Color: Black with blue stripe.
Diameter: 3-1/2".
Length: 12.5 feet.

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 5/8".
Color: Black.

Clutch or throttle universal connection kit for single or dual station applications.
For use with 33C series cables.
Includes instructions.

Neutral safety switch kit for S and Twin S controls.

Universal, EPA compliant primer bulb.
Stainless steel bands.
Synthetic rubber bulb.
Stays flexible in cold or warm climates.
ID: 3/8".