20 AMP Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits Weight: .13 lb

Made of flame-resistant Buna-N form seal nylon. Designed for the marine environment. Resistant to salt water, alkalis, acids, and oils. Rated for depths up to 300 feet. Cable range: 18-10 gauge. Thread size: 3/8" NPT.

20 AMP Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits Weight: .06 lb

Heat shrink tubing - 1" X 3". Cross linked polyolefin tubing is much stronger than PVC. Heat activated adhesive lining provides impervious seals. Protects from saltwater, oil, acid, sunlight, and strain. Able to shrink down to 1/3 of original size. Dimensions: 1" X 3". Two tubes per package. Color: black and red. Weight: .1 lb.

Manufactured from tinned copper with a flexible vinyl coating for corrosion prevention.
Resists cold, salt water, UV rays, and many petrochemicals.
Meets ABYC, UL & USCG requirements.

100 foot spool; also available by the foot.

Color: Yellow.

Ancor primary wire, 16 AWG. Manufactured from tinned copper for corrosion prevention. Insulated with a flexible proprietary vinyl coating. Resists cold, salt water, UV rays, and many petrochemicals. Color: White. Length: 500 feet.

Nylon cable clamps - 25 pack. Cast from a strong, flexible material. Resistant to solvents, oils, acids and moisture. Unique screw hole alignment feature speeds installation. Absorbs shock and vibration; reduces unwanted noise. Size: 3/4". Weight: .04 lb.

Safety duplex cable, 12/2 AWG. Manufactured from tinned copper for corrosion prevention. Covered with an anti-abrasive, easily-removed outer jacket. Resists cold, salt water, UV rays, and many petrochemicals. Color-coded red and yellow inner conductor wire. Length: 100 feet per spool.

Manufactured from tinned copper with a flexible vinyl coating for corrosion prevention.
Resists cold, salt water, UV rays, and many petrochemicals.
Meets ABYC, UL & USCG requirements.

100 foot spool; also available by the foot.

Color: Black.

Miniature lamp bulb - twin pack.
Features a heavy duty glass envelope for break resistance.
Filaments designed to give hours of reliable burning.
12 volt, 3.8 watt.
2 candlepower.

Manufactured from tinned copper with a flexible vinyl coating for corrosion prevention.
Resists cold, salt water, UV rays, and many petrochemicals.
Meets ABYC, UL & USCG requirements.

100 foot spool; also available by the foot.

Color: Green.

Nylon insulated female snap plugs. Double crimp, funnel entry, UL 310. Wire size: 16-14. 25 per pack. 

Nylon insulated male snap plugs. Double crimp, funnel entry, UL 310. Wire size: 16-14. 25 per pack. 

Nylon insulated disconnect terminals. Features double crimping and a funnel entry. Wire range: 16-14. 100 per pack.

Safety duplex cable, 12/2 AWG. Manufactured from tinned copper for corrosion prevention. Covered with an anti-abrasive, easily-removed outer jacket. Resists cold, salt water, UV rays, and many petrochemicals. Color-coded red and yellow inner conductor wire. Length: 500 feet per spool.

Adhesive lined heat shrink disconnects - male.
Cross linked polyolefin tubing is much stronger than PVC.
Heat activated adhesive lining provides impervious seals.
Protects from saltwater, oil, acid, sunlight, and strain.
Able to shrink down to 1/3 of original size.
Pure copper for maximum current flow.
Wire size: 16-14 gauge.
3 per pack.

Cross linked polyolefin tubing is much stronger than PVC. Heat activated adhesive lining provides impervious seals. Protects from saltwater, oil, acid, sunlight, and strain. Able to shrink down to 1/3 of original size. Dimensions: 3/8" X 3". Color: Red. 3 per pack.

Heat shrink tubing - 3/8" X 6". Cross linked polyolefin tubing is much stronger than PVC. Heat activated adhesive lining provides impervious seals. Protects from saltwater, oil, acid, sunlight, and strain. Able to shrink down to 1/3 of original size. Dimensions: 3/8" X 6". Five tubes per package. Color: red. Weight: .1 lb.

120 piece kit high quality tinned copper connectors.
Nylon insulation.
Reusable container.
Assorted butt, ring, spade, male and female disconnects.

Ancor primary wire, 16 AWG. Manufactured from tinned copper for corrosion prevention. Insulated with a flexible proprietary vinyl coating. Resists cold, salt water, UV rays, and many petrochemicals. Color: Red. Length: 100 feet.

Ancor battery cable, 4 AWG. Manufactured from tinned copper for corrosion prevention. Insulated with a flexible proprietary vinyl coating. Resists cold, salt water, UV rays, and many petrochemicals. Color: Red. 100 foot spool.

Features two 3/8" terminal studs. 
Tin plated copper construction. 
Rated for a maximum of 200 amps, 48 volts DC.

Dual power post cable connectors. For connection high-amperage conductors. 3/8" studs. Includes one red and one black insulator. Mounts with #10 screws. Rated for up to 48 volts. Weight: .5 lb.

Designed for outboard engine installation when factory cables need to be extended Includes one black and one red insulator 48 Volts DC - Accepts #10 (M5) Screws Weight: .2 lb

Dual power post cable connectors. For connection high-amperage conductors. 5/16" studs. Includes one red and one black insulator. Mounts with #10 screws. Rated for up to 48 volts.

Connects high amperage cables securely. Stud size: 1/4" x 3/4".

Heat shrink tubing - 3/16" X 6". Cross linked polyolefin tubing is much stronger than PVC. Heat activated adhesive lining provides impervious seals. Protects from saltwater, oil, acid, sunlight, and strain. Able to shrink down to 1/3 of original size. Dimensions: 3/16" X 6". Ten tubes per package. Color: black. Weight: .1 lb.

Heat shrink tubing - 3/16" X 3". Cross linked polyolefin tubing is much stronger than PVC. Heat activated adhesive lining provides impervious seals. Protects from saltwater, oil, acid, sunlight, and strain. Able to shrink down to 1/3 of original size. Dimensions: 3/16" X 3". Three tubes per package. Color: black. Weight: .1 lb.