MRV 80 degrees two speed windshield wiper motor. Heavy duty 12 volt motor with right angle drive. Adjustable to right or left, self parking, coasts to park. Easily powers 22" x 22" arm/blade combo. Accepts blades from 16" to 24". Pre-set sweep at 80 degrees, adjustable to 45, 60, or 110 degrees. 2-1/2" shaft length.

MRV 80 degrees two speed windshield wiper motor.
Heavy duty 12 volt motor with right angle drive.
Adjustable to right or left, self parking, coasts to park.
Easily powers 22" X 22" arm/blade combo.
Accepts blades from 16" to 24".
Pre-set sweep at 80 degrees, adjustable to 45, 60, or 110 degrees.
1.5" shaft length.

Switches a single battery to a single load group.
Single-circuit ON-OFF.
Two switch positions.
Rated for 300 amps.

Flat rocker switch is flush to "ON". Trip free design cannot be held on during fault condition. Color actuator indicates "OFF" position. 8 amps.

Flat rocker switch is flush to "ON". Trip free design cannot be held on during fault condition. Color actuator indicates "OFF" position. 10 amps.

Single pole. Rocker actuator is flush in the "ON" position. Color actuator indicates "OFF" position. "Trip Free" design cannot be held "ON". Rated for 15 amps.

Flat rocker switch is flush to "ON". Trip free design cannot be held on during fault condition. Color actuator indicates "OFF" position. 20 amps.

Rocker actuator is flush in "ON" position. Designed to eliminate the risk of accidental switching. "Trip-Free" design cannot be held "ON" during faults. Rated for 30 amps.

Rocker actuator is flush in "ON" position. Designed to eliminate the risk of accidental switching. "Trip-Free" design cannot be held "ON" during faults. Rated for 50 amps.

Mini compact twin horn. Fundamental frequency: 490. dB(A) rating: 109 at one meter. Maximum amperage draw: 6 Amps. Dimensions: 3" X 8" X 1-3/4".

Standard duplex cable, 8/2 AWG. Manufactured from tinned copper for corrosion prevention. Covered with an anti-abrasive, easily-removed outer jacket. Resists cold, salt water, UV rays, and many petrochemicals. Color-coded red and yellow inner conductor wire. Length: 100 feet per spool.

Reduces unwanted noise and prevents corrosion. Ideal for harsh marine environments. Resistant to oils, acids, salt water. Usable in temperatures between -50° to 300° F. Absorbs shocks and vibration. Diameter: 3/8". 10 per box.

Manufactured from tinned copper with a flexible vinyl coating for corrosion prevention.
Resists cold, salt water, UV rays, and many petrochemicals.
Meets ABYC, UL & USCG requirements.

100 foot spool; also available by the foot.

Color: Black.

NOTE: When purchasing full rolls, shipping via UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Spiral wrap Permits flexible routing of cable harnesses. Provides abrasion protection for wire and cable. Allows lead outs at any point for easy installation. Diameter: 3/8". Length: 10'. Weight: .2 lb.

125/250 volt, 50 amp female to 125 volt, 30 amp male. Covers and sealing collars for wet locations. Sealing collar system joins adapter to cord set. Positive, mechanical connection. Provides the maximum in moisture protection.

Standard duplex cable, 12/2 AWG. Manufactured from tinned copper for corrosion prevention. Covered with an anti-abrasive, easily-removed outer jacket. Resists cold, salt water, UV rays, and many petrochemicals. Color-coded red and black inner conductor wire. Length: 100 feet per spool.

Ancor primary wire, 10 AWG. Manufactured from tinned copper for corrosion prevention. Insulated with a flexible proprietary vinyl coating. Resists cold, salt water, UV rays, and many petrochemicals. Color: Green. Length: 100 feet.

Ancor primary wire, 12 AWG. Manufactured from tinned copper for corrosion prevention. Insulated with a flexible proprietary vinyl coating. Resists cold, salt water, UV rays, and many petrochemicals. Color: Yellow. Length: 100 feet. 100' spool Weight: 3 lbs

Connects dockside receptacle to boatside inlet. Features a sealing collar. 30 amp, 125 volt female to 50 amp, 125 volt male.

Use with 20A and 30A power systems Gives maximum moisture protection between boat and shore.

Connects dockside receptacle to boatside inlet. Features a sealing collar for maximum protection. 50 amp (125V) female to 30 amp (125V) male.

Standard duplex cable, 12/2 AWG. Manufactured from tinned copper for corrosion prevention. Covered with an anti-abrasive, easily-removed outer jacket. Resists cold, salt water, UV rays, and many petrochemicals. Color-coded red and black inner conductor wire. Length: 500 feet per spool.

30 amp right angle cordset adapter. Provides minimal cordset protrusion from inlets. Griplock handle design for easy hook-up. Super-flexible 10/3 cable. Includes sealing collar for moisture protection.

CableCap stud insulator. Insulates stud type connectors on high amperage devices. Cable size: 3/0 - 4/0. Color: Black. Weight: .1 lb.

CableCap stud insulator. Insulates stud type connectors on high amperage devices. Cable size: 3/0 - 4/0. Color: Red. Weight: .1 lb.

Insulates stud type connectors. For on alternators, starters, windlasses and other devices. .50 stud. Black PVC construction.

Insulate stud type connectors on alternators, starters, windlasses and other high amperage devices Material: PVC Cable Size: 2-2/0 Weight: .07 lb

Insulates stud type connectors. For on alternators, starters, windlasses and other devices. 8-4 wire. Black PVC construction.

Insulate stud type connectors on alternators, starters, windlasses and other high amperage devices Material: PVC Cable Size: 8-4 Weight: .05 lb

Insulates stud-type connector. For alternators, starters, and other devices. For 18 - 10 gauge wire.