Shore power straight adapter. High-quality, one-piece adapters. NOT equipped with sealing collars. Appropriate for use in enclosed, dry locations. Features an LED power indicator. Ergonomically designed. Boat side inlet / cord set end: Female, 15 or 20A, 125V Dock side receptacle: Male, 30A, 125V, locking.

Incandescent bulb with festoon end caps - twin pack. Features heavy duty glass envelope for break resistance and nickel-plated brass base helps prevent corrosion. Filaments designed to give hours of reliable burning. 12 volt, 6 watt, rated for 1000 hours. 2 candlepower.

Nylon insulated disconnect terminals. Features double crimping and a funnel entry. Wire range: 16-14. 25 per pack. Weight: .12 lb.

Nylon insulated disconnect terminals. Features double crimping and a funnel entry. Wire range: 16-14. 25 per pack. Weight: .09 lb.

Nylon insulated disconnect terminals. Features double crimping and a funnel entry. Wire range: 22-18. 25 per pack. Weight: .08 lb.

Nylon insulated disconnect terminals. Features double crimping and a funnel entry. Wire range: 22-18. 25 per pack. Weight: .11 lb.

Single crimp butt connectors. Nylon insulated, tinned copper terminals. Wire size: 12-10 gauge. 25 per pack. Weight: .1 lb.

3/8" hole size, 1/4" inside diameter, 3/32" panel width.
Provides instant abrasion resistance to wires passing
through panel hole.
Flexible black vinyl makes installation simple.
Five per package.

Single crimp butt connectors. Nylon insulated, tinned copper terminals. Wire size: 16-14 gauge. 25 per pack. Weight: .1 lb.

Single crimp butt connectors. Nylon insulated, tinned copper terminals. Wire size: 22-18 gauge. 25 per pack. Weight: .09 lb.

Nylon insulated disconnect terminals. Features double crimping and a funnel entry. Wire range: 12-10. 25 per pack. Weight: .13 lb.

Nylon insulated disconnect terminals. Features double crimping and a funnel entry. Wire range: 12-10. 25 per pack Weight: .13 lb.

Features a stainless steel dress cap.
Provides a waterproof antenna side entry.
Simple, one-piece design.
For use above the waterline only.
Max diameter: 1".

Double crimp butt connectors. Nylon insulated, tinned copper terminals. Wire size: 16-14 gauge. 25 per pack. Weight: .11 lb.

Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits Weight: .43

Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits Weight: .34 lb

Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits Weight: .1 lb

Ancor primary wire, 16 AWG. Manufactured from tinned copper for corrosion prevention. Insulated with a flexible proprietary vinyl coating. Resists cold, salt water, UV rays, and many petrochemicals. Color: Green. Length: 100 feet.

Ancor primary wire, 14 AWG. Manufactured from tinned copper for corrosion prevention. Insulated with a flexible proprietary vinyl coating. Resists cold, salt water, UV rays, and many petrochemicals. Color: White. Length: 100 feet.

Ancor battery cable, 4 AWG. Manufactured from tinned copper for corrosion prevention. Insulated with a flexible proprietary vinyl coating. Resists cold, salt water, UV rays, and many petrochemicals. Color: Black. 100 foot spool.

Safety duplex cable, 12/2 AWG. Manufactured from tinned copper for corrosion prevention. Covered with an anti-abrasive, easily-removed outer jacket. Resists cold, salt water, UV rays, and many petrochemicals. Color-coded red and yellow inner conductor wire. Length: 100 feet per spool.

Manufactured from tinned copper with a flexible vinyl coating for corrosion prevention.
Resists cold, salt water, UV rays, and many petrochemicals.
Meets ABYC, UL & USCG requirements.

50 foot spool; also available by the foot.

Color: Black.

Heat shrink tubing - 3/4" X 3". Cross linked polyolefin tubing is much stronger than PVC. Heat activated adhesive lining provides impervious seals. Protects from saltwater, oil, acid, sunlight, and strain. Able to shrink down to 1/3 of original size. Dimensions: 3/4" X 3". Three tubes per package. Color: red. Weight: .1 lb.

Replacement miniature halogen bulb. Heavy duty glass envelope for break resistance. Nickel-plated brass base helps prevent corrosion. Filaments designed to give hours of reliable burning 12 volt, 10 watt, rated for 2000 hours. 11 candlepower brightness.

Designed with extra squeegee "claws" that spread pressure evenly over the length of the blade,
so it will conform to a curved windshield.
All stainless steel and marine-grade silicone construction.

Length: 20".

ANCOR heat shrink butt connectors - assorted. Features an adhesive coated interior. Heat shrinks to form a watertight seal. Offers the ultimate in vibration and strain relief. Tinned for corrosion resistance. Pure copper construction for maximum current flow. Nylon marine grade insulator. Resists sunlight, water, oil, and chemicals. Quantity: 10. Weight: .07 lb.

Replacement miniature halogen bulb. Heavy duty glass envelope for break resistance. Nickel-plated brass base helps prevent corrosion. Filaments designed to give hours of reliable burning 12 volt, 5 watt, rated for 2000 hours. 11 candlepower brightness.