For electrical system labeling. Blank, black label for custom installations.

Three pole, four wire dockside receptacle. Corrosion resistant, marine-grade construction. Black nylon. 50 amp, 125 / 250 volt

Kit includes: AFI waterproof wiper motor (part number 35500). 6-3/4" - 10-1/2" deluxe adjustable stainless steel arm. 11" Deluxe stainless steel curved blade (33004).

Kit includes:
- 500 waterproof wiper motor
- 11.5" deluxe stainless steel curved blade
- Deluxe adjustable stainless steel arm (6.75" to 10.5").
Windshield mount: .5" shaft diameter.

Hook and catch style classic straight wiper blade. Stainless steel construction. Replaces most standard blades on boats built prior to 1990. Not designed for use with Standard or Deluxe arms. Size: 11".

AC current transformer, rated for 300A AC / 50mA AC.
Diameter: 2.68".

Rugged, insulated copper wire. Meets USCG standards. Resists water, acid, oil, UV radiation. 16 AWG. Color: Brown. Roll of 100 ft.

Markable heat shrink. Easily written upon, gives permanent identification. Tube dimensions: 1/4" X 3". 10 per pack. Weight: .02 lb

250 ampere L-series solenoid switch.
Hermetically sealed contacts.
Activated by optional remote ON/OFF #8230 switch.   
Coil control circuit minimizes heating and amperage draw.  
Nominal voltage: 12/24V DC.
Cranking rating 30 seconds: 1,000A.
Intermittent rating 5 minutes: 400A.
Continuous rating: 250A.
Terminal stud size: 5/16".
IP67 rating: protected against immersion up to 1 meter for 30 minutes.
Dimension: 3.17" wide x 2.63" high x 2.86" deep.

Designed for small spaces and the marine environment. Easily connects with other busbars and fuseholders. High temp plastic and clear polycarbonate construction. 4x 6mm (1/4") studs. 10 x 4mm (5/32") terminals. 200A maximum per bar. Dimensions: 3.9" x 1.9" x 2.0".

Ancor primary wire, 16 AWG. Manufactured from tinned copper for corrosion prevention. Insulated with a flexible proprietary vinyl coating. Resists cold, salt water, UV rays, and many petrochemicals. Color: Dark Blue. Length: 500 feet.

Replacement inlet interior for Marinco standard non-metallic inlets manufactured prior to 1/1/91.  
30A 125V.

ANCOR marine grade lugs. Manufactured from heavy duty annealed tinned copper. Designed to give maximum current flow. Tin plating resists corrosion. Closed end design seals out moisture. Cable size: 2/0. Screw size: 1/2". 10 per package.

ANCOR marine grade lugs. Manufactured from heavy duty annealed tinned copper. Designed to give maximum current flow. Tin plating resists corrosion from salt and moisture. Closed end design seals out moisture. Cable size: #8. Screw size: #10. 25 lugs per package.

ANCOR marine grade lugs. Manufactured from heavy duty annealed tinned copper. Designed to give maximum current flow. Tin plating resists corrosion from salt and moisture. Closed end design seals out moisture. Cable size: #8. Screw size: 3/8". 25 lugs per package.

ANCOR marine grade lugs. Manufactured from heavy duty annealed tinned copper. Designed to give maximum current flow. Tin plating resists corrosion from salt and moisture. Closed end design seals out moisture. Cable size: #8. Screw size: 1/4". 25 lugs per package.

ANCOR marine grade lugs. Manufactured from heavy duty annealed tinned copper. Designed to give maximum current flow. Tin plating resists corrosion from salt and moisture. Closed end design seals out moisture. Cable size: #6. Screw size: 1/4". 25 lugs per package.

ANCOR marine grade lugs. Manufactured from heavy duty annealed tinned copper. Designed to give maximum current flow. Tin plating resists corrosion from salt and moisture. Closed end design seals out moisture. Cable size: #6. Screw size: 3/8". 25 lugs per package.

ANCOR marine grade lugs. Manufactured from heavy duty annealed tinned copper. Designed to give maximum current flow. Tin plating resists corrosion from salt and moisture. Closed end design seals out moisture. Cable size: #4. Screw size: 1/4". 25 per package.

ANCOR marine grade lugs. Manufactured from heavy duty annealed tinned copper. Designed to give maximum current flow. Tin plating resists corrosion from salt and moisture. Closed end design seals out moisture. Cable size: #4. Screw size: 5/16". 25 per package.

ANCOR marine grade lugs. Manufactured from heavy duty annealed tinned copper. Designed to give maximum current flow. Tin plating resists corrosion from salt and moisture. Closed end design seals out moisture. Cable size: #4. Screw size: 3/8". 25 per package.

ANCOR marine grade lugs. Manufactured from heavy duty annealed tinned copper. Designed to give maximum current flow. Tin plating resists corrosion. Closed end design seals out moisture. Cable size: #2. Screw size: 5/16". 25 per package.

ANCOR marine grade lugs. Manufactured from heavy duty annealed tinned copper. Designed to give maximum current flow. Tin plating resists corrosion. Closed end design seals out moisture. Cable size: #2. Screw size: 3/8". 25 per package.

With 4mm power tapping plate. Features increased stainless steel stud length. Clear polycarbonate cover for insulation and protection. Size: 10mm (3/8"). Dimensions: 1.9" x 1.9" x 2.4".

Requires the use of terminal fuse block.
Ignition protected.
Clear window to easily see blown condition.
75 amps.

Must be used with a terminal fuse block.
Clear window makes it easy to check the fuse condition.
Rated for 125 amps, 58 volts DC.

Safety duplex cable, 6/2 AWG. Manufactured from tinned copper for corrosion prevention. Covered with an anti-abrasive, easily-removed outer jacket. Resists cold, salt water, UV rays, and many petrochemicals. Color-coded red and yellow inner conductor wire. Length: 50 feet per spool.

Cross linked polyolefin tubing is much stronger than PVC. Heat activated adhesive lining provides impervious seals. Protects from saltwater, oil, acid, sunlight, and strain. Able to shrink down to 1/3 of original size. Color: Black.