An economical ablative antifouling coating.
Designed for a single season of use.
Can be used on most previously painted surfaces.
Equally effective on both power and sail boats.
Will wear away over time, eliminating sanding.
One or two coats per season are recommended.
Contains 37.5% cuprous oxide.
Annual recoating recommended.
Not for aluminum hulls.
Color: Blue.
Size: 1 qt.

Seasonal antifouling bottom paint.
Provides economical hybrid protection.
Features high density biocide to reduce marine build-up.
Polishes to a smooth finish over time.
Compatible over most bottom paints.
Color: Blue.
Size: 1 gallon.

Flexible, semi-paste waterproof sealant.
Slow-oxidizing.
For bedding joints in hull areas.
May be used on wood, fiberglass, or metal.
Apply by hand, pressure gun, or putty knife.
Color: Natural.
Size: 1 quart.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
Color: "Black".
Size: Gallon.

A long-lasting and strong anti-fouling paint.
Dries to a durable hard protective coating that stands up to the toughest fouling conditions.
Trinidad PRO's high copper load (65%) creates an antifoulant with strong resistance to barnacles and other organisms.
Pettit's "Fast Dry" technology allows for painting and launching on the same day, depending on conditions.

Color: Black.

An epoxy repair compound.
Creates a waterproof bond with most surfaces.
Great for filling voids or cracks.
For use above or below the waterline.
Will not sag, run or shrink.
Convenient 1:1 mixing ratio.

A two-part water-based epoxy primer / sealer.

May be used on concrete, masonry, fiberglass, wood and previously painted substrates.
This primer is recommended for your projects with Tuff Coat for proper adhesion.
Simple 1:1 mix.

1 quart kit.

Seasonal antifouling bottom paint. 
Provides economical hybrid protection. 
Features high density biocide to reduce marine build-up. 
Polishes to a smooth finish over time. 
Compatible over most bottom paints. 
Color: Green. 
Size: 1 gallon. 

Easy to use, simply mix in a 1:1 ratio.
For cracks, gouges, voids and holes.
High strength formula makes repairs permanent.
100% waterproof when cured.
Can be used above or below the waterline.
Will not sag, shrink or run.
Size: 4 oz.

Non-skid deck paint.
Super tough non-skid finish.
Durable and weather resistant.
Fade and UV resistant.
Easy to apply.
Color: White.
Size: 1 gal.

Non-skid deck paint.
Super tough non-skid finish.
Durable and weather resistant.
Fade and UV resistant.
Easy to apply.
Color: White.
Size: 1 qt.

Textured foam rollers.
Designed specifically to apply Tuff Coat nonskid coating.
Will evenly distribute the material, which can't be achieved with a standard roller.
Length: 4".

Two per package.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
Color: "Hatteras Off White".
Size: Gallon.

Multi-season ablative bottom paint.
Copper-free formula is safe for all substrates.
Excellent for aluminum hulls, lower units and outdrives.
Contains 6% Econea biocide and 4.8% zinc omadine.
Suitable for trailered boats.
Color: Black.
Size: 1 gal.

Self-polishing ablative antifouling paint.
Water-based and copper-free.
Easy to apply, cleans up with soap and water.
Combines 6% Econea biocide with slime-fighting zinc omadine.
Designed for multi-season protection.
Compatible with almost all bottom paints.
Safe for use on all substrates including steel and aluminum.
Color: Black.
Size: 1 gal.

Seasonal antifouling bottom paint.
Provides economical hybrid protection.
Features high density biocide to reduce marine build-up.
Polishes to a smooth finish over time.
Compatible over most bottom paints.
Color: Black.
Size: 1 gallon.

Seasonal antifouling bottom paint.
Provides economical hybrid protection.
Features high density biocide to reduce marine build-up.
Polishes to a smooth finish over time.
Compatible over most bottom paints.
Color: Red.
Size: 1 gallon.

Durable, high-performance antifouling paint.
Modified epoxy base with a hard finish.
Has excellent adhesion properties.
Compatible over most hard paints in good condition.
Use it over wood, fiberglass, and primed steel.
Not for use on aluminum hulls.
Contains 45.7% cuprous oxide.
Color: Red.
Size: 1 gal.

General purpose tie coat primer.
Use above or below waterline.
Compatible with anti-fouling bottom paints.
Compatible with all types of single component topside finishes.

Designed to use with marine paints and varnishes.
Contains mineral spirits and Xylol.
Requires the use of a NIOSH/OSHA approved fitted respirator.

A long-lasting and strong anti-fouling paint.
Dries to a durable hard protective coating that stands up to the toughest fouling conditions.
Trinidad PRO's high copper load (65%) creates an antifoulant with strong resistance to barnacles and other organisms.
Pettit's "Fast Dry" technology allows for painting and launching on the same day, depending on conditions.

Color: Blue.

Provides strong multi-season performance.
Powerful dual biocide for protection under all conditions.
Gives the benefits of both hard and ablative paints.
For fiberglass, wood or aluminum hulls.
Dries to a burnishable racing finish.
Hard, smooth surface is exvellent for trailered boats.
Contains 25% cuprous thiocyanate and 2.8% zinc pyrithione.
Color: White.
Size: 1 gal.

Features long-lasting UV absorbers.
Provides outstanding gloss retention and UV protection.
Golden amber color.
One pint.

Provides strong multi-season performance.
Powerful dual biocide for protection under all conditions.
Gives the benefits of both hard and ablative paints.
For fiberglass, wood or aluminum hulls.
Dries to a burnishable racing finish.
Hard, smooth surface is exvellent for trailered boats.
Contains 25% cuprous thiocyanate and 2.8% zinc pyrithione.
Color: Blue.
Size: 1 qt.

Easy to use, simply mix in a 1:1 ratio.
For cracks, gouges, voids and holes.
High strength formula makes repairs permanent.
100% waterproof when cured.
Can be used above or below the waterline.
Will not sag, shrink or run.
Size: 16 oz.

Penetrates raw wood.
Gives improved stability and moisture resistance.
Prevents excessive absorption of undercoaters and varnishes.
Tung/linseed oil phenolic based resin.
Not for use on teak.
Applies easily by brush or spray.
Size: 1 quart.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
Color: "Blue Ice".
Size: Quart.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
Color: "Jade Green".
Size: Quart.

A traditional tough and flexible standard for marine use.
Protects your boat's finish from damaging UV rays.
Will give a light amber tint to brightwork.
Gives a rich, mirror-like finish and abrasion resistance.
Size: 1 quart.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
Color: "Bikini Blue".
Size: Quart.

A lightweight, fast-curing, two-part epoxy putty.
For filling and smoothing surface imperfections.
Safe for use above and below the waterline.
An integral part of Pettit's gelcoat blister repair system.
Also used for leveling metal keels or other underwater areas.
Excellent chemical and water resistance.
Non-sagging, non-shrinking and easy to apply.
Color: Off-white.
Size: 1.5 quarts.

A lightweight, fast-curing, two-part epoxy putty.
For filling and smoothing surface imperfections.
Safe for use above and below the waterline.
An integral part of Pettit's gelcoat blister repair system.
Also used for leveling metal keels or other underwater areas.
Excellent chemical and water resistance.
Non-sagging, non-shrinking and easy to apply.
Color: Off-white.
Size: 8.5 ounces.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
Color: "Kelly Green".
Size: Quart.

A powerful chemical stripper that's effective on many coatings and safe for gelcoat.
Designed to strip multiple layers of varnishes, bottom paints, primers and epoxies.
Gel consistency for working on horizontal and vertical surfaces.

Size: 1 gallon.

A powerful chemical stripper that's effective on many coatings and safe for gelcoat.
Designed to strip multiple layers of varnishes, bottom paints, primers and epoxies.
Gel consistency for working on horizontal and vertical surfaces.

Size: 1 quart.

Textured foam roller.
Designed specifically to apply Tuff Coat nonskid coating.
Will evenly distribute the material, which can't be achieved with a standard roller.
Length: 9".

One per package.