Spare part for PERKO figure no. >1310/1161 (Bi-Color Lights) >1612/1614 (Removable Bi-Color Lights) Weight: .7 lbs

Ribbed style rowlock with chrome plated finish.

Features:

• Chrome plated finish, zinc alloy
• For use with Perko rowlock sockets; Perko part #1185DP0CHR, #1186DP0CHR, or #1187DP0CHR
• Dimensions: 1-3/4" width between horns, 1/2" shank outer diameter, 1-3/4" shank length

Medium spare screw socket Spare part for PERKO Fig. No. 0112B & 0309B All-Round Lights Weight: .1 lb

Clear. 40 watt, 120 volt.

Cast bronze construction. Length: 4". Weight: .19 lb.

Double contact bayonet indexing base bulb Nominal wattage: 12 Wattage: 25 Amps: 2.08 Weight: .1 lb

Chrome plated zinc alloy Open Width: 1-1/2" Pin Height: 1-1/2" Weight: .1564 lb

Stainless steel. Replacement basket for intake strainer. Diameter: 3/4".

Double contact Clear Nominal Wattage: 24 Wattage: 15 Weight: .4 lb

For door thicknesses 5/8" to 1-3/8" Chrome plated zinc door lock Sliding lock button Regular bevel with box strike Case dimensions: 2-1/8" x 1-3/4" Escutcheon dimensions: 4-3/8" x 1-1/4" Screw size #6 Weight: .75 lb

Surface mount dome light.
Chrome plated zinc alloy.
Clear polymer lens.
Double contact bayonet socket.
Black vinyl mounting gasket.
Push switch with water resistant boot.
Dimensions: 6" OD base, 5" lens, 2" overall depth.
Voltage: 12V DC (bulb included).
17 watts, 1.44 amps.
Maximum watts: 17.
Replacement bulb: Perko 0337013DP.

Surface mount dome light.
Chrome plated zinc alloy.
Clear polymer lens.
Double contact bayonet socket.
Black vinyl mounting gasket.
Push switch with water resistant boot.
Dimensions: 5" OD base, 4" lens, 1-7/8" overall depth.
Voltage: 12V DC (bulb included).
11 watts, .94 amps.
Maximum watts: 17.
Replacement bulb: PRK337012DP.

Chrome plated bronze construction Supplied with black friction pad Eliminates rattle and provides smooth operation Rod Length: 2-3/4" - Dimensions: 3-7/16" x 1-7/16" Weight: .025 lb

Eye strap. Chrome plated zinc alloy. 5/16" eyes. Uses #8 screws. Length: 1-7/8". Weight: .16 lb.

Chrome plated zinc alloy Maximum rope size: 1/4" Plate dimensions: 1-9/16" X 1-3/8". Two per card.

Cast bronze Machined slots For Thru-Hull Size: 2" Strainer Dimensions: 8" x 5-1/8" Weight: 1.8 lbs

Double contact bayonet indexing base bulb Nominal wattage: 12 Wattage: 10 Amps: .83 Weight: .1 lb

Cast bronze. Complete with #1248 key and O-ring. Pipe size: 2". Marked "Diesel".

For use with Perko 309 and 116 lamps. Color: Gray.

Chrome Plated Brass 5/16" O.D. cable. Equipped with rubber grommet for watertight passage of cable Weight: .0625 lb

Chrome plated zinc alloy.
Anodized aluminum grill-type screen.

Molded white plastic Diameter: 1-1/2". For use with thru-hull.

Single. Size: 1/2". Aluminum with synthetic rubber cushion. 10 per bag.

Cast bronze construction. Length: 6". Weight: .31 lb.

Double contact bayonet bulb 12 volt - 30 watt - 2.5 amp Weight: .0625 lb

Switches betweeen On / Off / Both with AFD. Protects electrical contacts and terminals. Use with systems under 50 volts. Capacity: 250 amps continuous, 360 amps intermittent. Dimensions: 5-1/4" X 2-5/8".

Black plastic The keys for 1" thru 1-1/2" deck plates have a 1" spade on handle that fit many other "slot" type opening deck plates Weight: .125 lb

Chrome-plated zinc alloy. Length: 3". Two per card.

Stainless steel cable, ring and fittings. For 1-1/2" deck fills.

Vertical Flush Mount Chrome plated bronze flange Stainless steel tube Hard black plastic line Integral flip-up cap Drain Bib: Yes Weight: 1.58 lbs

For use with PERKO Figure No. 0305 - Solar-Ray Sealed Beam Searchlight 0313 - Solar-Ray Sealed Beam Searchlight 0314 - Pilot House Control Sealed Beam Searchlight 0534 - Deck Control Solar-Ray Sealed Beam Searchlight 0535 - Pilot House Control Solar-Ray Sealed Beam Searchlight 0538 - Deck Control Solar-Ray Sealed Beam Searchlight 0440-Removable Deck Control SolarRay Sealed Beam Searchlight Voltage: 12 Wattage: 100 Weight: .4 lb

Thru-Hull Connection for use with hose. Plain Bronze. (Not for use below waterline) Hose size: 1-1/8", Flange: 2-3/8", Max hull thickness 1-7/8" Back-side of flange is machined to fit hull and grooved to retain bedding compound.