Black molded plastic
For systems up to 50 volts - bulb not included.
Has double contact bayonet socket that will accommodate one bulb up to 40 watts.

Plain bronze plug. Cast bronze flange. Diameter: 3/4". Length: 1-1/4".

Surface mount dome light.
Chrome plated zinc alloy.
Clear polymer lens.
Double contact bayonet socket.
Black vinyl mounting gasket.
Push switch with water resistant boot.
Dimensions: 3-3/4" OD base, 3" lens, 1-1/2" overall depth.
Voltage: 12V DC (bulb included).
7 watts, .58 amps.
Maximum watts: 11.
Replacement bulb: Perko 0337011DP.

Cast bronze - Back side of flange is machined to fit hull and grooved to retain bedding compound Neck is threaded to approximately 1 inch from flange Neck Length: 5-1/2" - Flange Diameter: 2" Weight: .6 lb

Cast bronze construction. Chrome plated. Length: 5". Weight: .22 lb.

Aluminum with white baked enamel finish. Nylon mouthpiece. Conforms to ABYC Standard A-23. Length: 12-1/2".

Cast bronze Drilled holes O.D.: 5"

Chrome plated zinc alloy Locks by turn bottom from inside or key from outside bevel can be reversed during installation For Door Thickness: 1 to 1-3/8" Case Dimensions: 2-3/4" x 2" Weight: 1.25 lbs

32 volt. 12 candlepower. .4 amps. 2 bulbs per bag.

Chrome plated zinc alloy Removable pin Weight: .4688 lb

Clear. 60 watt, 120 volt.

Cast bronze Drilled holes O.D.: 3-1/2"

Cast bronze Cast hex for easier installation Curved 90 degrees Pipe Size: 2" Hose Size: 2" Overall Length: 7" Weight: 2.5 lbs

Cast bronze Cast hex for easier installation Curved 90 degrees Pipe Size: 2-1/2" Hose Size: 2-1/2" Overall Length: 8-1/2" Weight: 3.875 lbs

Nominal voltage: 12. Wattage: 15. Amps: .97.

Cast bronze. Diameter: 1-1/2".

Cast bronze construction. Chrome plated. Length: 6". Weight: .31 lb.

Soft black flange gasket with integral flip-up cap Soft black lip Replacement or upgrade for older holders Weight: .1875 lb

Cast bronze - Back side of flange is machined to fit hull and grooved to retain bedding compound Neck is threaded to approximately 1 inch from flange Neck Length: 5-1/2" - Flange Diameter: 2-1/4" Weight: .8 lb

Cast bronze Drilled holes O.D.: 4".

Reverse bevel with flush strike Chrome plated zinc For door thickness 5/8" to 1 3/8" Locks by turn button from inside or key from outside Screw Size: #6 Weight: 1.25 lb

Nominal voltage: 12. Wattage: 10. Amps: .74.

Molded white plastic Flush mount Inserts prevents passage of large objects without restricting water flow Weight: .3125 lb

Regular bevel with box strike Chrome plated zinc For door thickness 5/8" to 1 3/8" Locks by turn button from inside or key from outside Screw Size: #6 Weight: 1.25 lb

Chrome plated zinc alloy with black plastic splash guard. Removable 30 mesh stainless steel wire screen flame arrestor Hose size: 5/8".

Thru-Hull Connection for use with hose. Plain Bronze. (Not for use below waterline) Hose size: 3/4", Flange: 2", Max hull thickness 1-5/8" Back-side of flange is machined to fit hull and grooved to retain bedding compound.

Pipe Size: 3/4". Threaded Neck Length: 5/8". O.D. Flange: 2-3/8". Weight: .75 lb.

Cast bronze construction. Length: 3". Weight: .13 lb.

Chrome-plated zinc. Projects 1-3/8". Base width: 1-1/8".

Chome plated bronze Supplied with brass friction spring to eliminate rattle and provide detented operation Dimensions: 2-5/8" x 1-1/4" Weight: 1 lb

Stainless steel. 1/2" wide opening. Packed 2 per card.

Nominal voltage: 12. Wattage: 10. Amps: .80. Bulb diameter: 3/8". Bulb length: 1-1/8".

Cast bronze - Back side of flange is machined to fit hull and grooved to retain bedding compound Neck is threaded to approximately 1 inch from flange Neck Length: 5-1/2" - Flange Diameter: 2-7/8" Weight: 1 lb

Black plastic Chrome plated zinc alloy Stainless steel stem and lock nut With offset cam bar and flexible plastic strike Detents indicate open or closed position, easily installs in a 2" diameter hole, for door thickness 1/4" to 1-1/8" Weight: .4 lb

Chrome plated zinc Face Plate: 1-5/8" Weight: .0625 lb