The original System Three general purpose epoxy.
Does not contain any VOCs, solvent-free.
Has excellent pot life and cure-time control.
Combines with several different cure options.
Size: 1 quart.

The original System Three general purpose epoxy.
Does not contain any VOCs, solvent-free.
Has excellent pot life and cure-time control.
Combines with several different cure options.
Size: 1 gallon.

The original System Three general purpose epoxy hardener.
Does not contain any VOCs, solvent-free.
Has excellent pot life and cure-time control.
Type: #2, Medium.
Provides a tack-free thin film in 4-6 hours @ 77° F (25° C).
Size: 1 pint.

The original System Three general purpose epoxy hardener.
Does not contain any VOCs, solvent-free.
Has excellent pot life and cure-time control.
Type: #2, Medium.
Provides a tack-free thin film in 4-6 hours @ 77° F (25° C).
Size: 1/2 gallon.

Pourable, self-leveling bar and tabletop coating.
Easy to apply and cures crystal clear.
Exceptionally tough.
Scratch resistant, waterproof, alcohol proof.
100% solids, no solvents, low odor.
Can be applied over wood, ceramic, stone, concrete and more.
Size: 1.5 pints.

Pourable, self-leveling bar and tabletop coating.
Easy to apply and cures crystal clear.
Exceptionally tough.
Scratch resistant, waterproof, alcohol proof.
100% solids, no solvents, low odor.
Can be applied over wood, ceramic, stone, concrete and more.
Size: 3 quarts.

A medium-low viscosity epoxy resin.
Optimized for coating and reinforcing
fabric saturation in wood-composite boat building.
May also be used with fiberglass, Kevlar or graphite.
Designed to have superior wet-out properties
with little tendency to foam or trap air.
Tough, heat-resistant, and resilient.
Must be combined with hardener / cure for use.
Size: 1 qt.

A medium-low viscosity epoxy resin.
Optimized for coating and reinforcing fabric saturation in wood-composite boat building.
May also be used with fiberglass, Kevlar or graphite.
Designed to have superior wet-out properties with little tendency to foam or trap air.
Tough, heat-resistant, and resilient.
Must be combined with hardener / cure for use.
Size: 1 gal.

A hardener cure solution for use with epoxy resin.
Optimized for coating and reinforcing
fabric saturation in wood-composite boat building.
May also be used with fiberglass, Kevlar or graphite.
Designed to have superior wet-out properties
with little tendency to foam or trap air.
Tough, heat-resistant, and resilient.
Must be combined with epoxy resin for use.
Gel time: 26 minutes (100g mixture).
Tack-free thin film at 77° F (25° C): 3 hours.
Size: 1 pint.

GelMagic epoxy, designed for use with porous materials.
Simple and easy to measure (mixes in a 2:1 ratio).
Works great on overhead and vertical surfaces.
Designed for high peel strength.
Resistant to embrittlement, and impact and creep resistant.
May be post-cured up to 140º F for even greater performance.
Size: 1.5 pint kit.

GelMagic epoxy, designed for use with porous materials.
Simple to use, automatically mixes as it comes out.
Works great on overhead and vertical surfaces.
Designed for high peel strength.
Resistant to embrittlement, and impact and creep resistant.
May be post-cured up to 140º F for even greater performance.
This cartridge may be used with a conventional caulking gun.
Size: 6.4 oz.
Includes one tip.

A fast-cure, two-part epoxy fairing putty kit.
Lightweight and microballoon-filled.
Has excellent moisture resistance.
Each part, resin and hardener, are color coded.
Easy to mix.
Non-sagging, butter-like consistency.
Cures enough for machine sanding in 4 hours (@ 77º F).
Mized color: Tan.
Kit size: 1.5 pints.

A fast-curing two-part epoxy fairing putty.
Lightweight, microballoon-filled with excellent moisture resistance
Each part has a distinctive color, so it's easy to mix.

Cures in 3-4 hours at 77º F.
Color: Tan.
Size: 1.5 qt.

A fast-cure, two-part epoxy fairing putty kit.
Lightweight and microballoon-filled.
Has excellent moisture resistance.
Each part, resin and hardener, are color coded.
Easy to mix.
Non-sagging, butter-like consistency.
Cures enough for machine sanding in 4 hours (@ 77º F).   
Mixed color: Tan.
Kit size: 3 quarts.

A low viscosity epoxy wood sealer, primer, and consolidant.
Very easy to use.
For repair / restoration of rotted, dried-out, spongy wood.
Creates a sound, waterproof base for filler putty.
Includes a measuring/application bottle.
Low odor, solvent free.
Flows well for superior penetration.
Mixes in a simple 2:1 ratio.
May be used on damp, "punky" or desiccated wood.
Size: 1.5 pint kit.

A low viscosity epoxy wood sealer, primer, and consolidator.
Very easy to use.
For repair / restoration of rotted, dried-out, spongy wood.
Creates a sound, waterproof base for filler putty.
Includes a measuring/application bottle.
Low odor, solvent free.
Flows well for superior penetration.
Mixes in a simple 2:1 ratio.
May be used on damp, "punky" or desiccated wood.
Size: 1.5 quart kit.