Pump with oil resistant nitrile impeller Bronze body - Stainless steel shaft Stainless steel lip or mechanical seals for shaft Shielded ball bearings - 1" IPT Weight: 6.2 lbs

Pump with neoprene impeller Bronze body - Stainless steel shaft Stainless steel lip or mechanical seals for shaft Shielded ball bearings - 1" IPT Weight: 6.2 lbs

Pump with oil resistant nitrile impeller Bronze body - Stainless steel shaft Stainless steel lip or mechanical seals for shaft Shielded ball bearings - 1" IPT Weight: 6.2 lbs

Suitable for diesel, salt or fresh water. Rated for 500 gallons per hour. 3/4" ports. 12 volts.

A compact, general-purpose pump. Bronze body. Neoprene impeller. 3/8" ports. Rated for 3.4 gallons per minute at 10 feet. Stainless steel shaft. 6 foot cord, with AC plug.

Has a high capacity flow rate and horizontal-oriented ports. Rated for 4710 GPH. Self-priming up to 15 feet. Mechanical face type shaft seal. Nitrile impeller. Fitted with single "B" groove pulley. 12 volt.

Marine bronze and stainless steel for reliability. Self-priming. 1-1/4" NPT input. 1" shaft. 1/2" cam.

Can deliver almost 7 GPM at open flow.
Equipped with pressure-cast bronze body.
Features a reusable O-ring type end cover seal.
1/2" internal pipe thread and 1" external hose barb.
Includes 2 port adapter.
24 volt DC.

Electromagnetic clutch pumps equipped with a powerful electric clutch for convenient remote operation 12 volt model Capable of operating through a wide range of speeds and in either rotational direction 1B Pulley Belt Grooves - 1" NIPT - 26 GPM Weight: 14.75 lbs

Can deliver almost 7 GPM at open flow.
Equipped with pressure-cast bronze body.
Features a reusable O-ring type end cover seal.
1/2" internal pipe thread and 1" external hose barb.
Includes 2 port adapter.
12 volt DC.

Engine Cooling Pump & General Purpose Pumping 3.7 GPM, 1/4" NIPT Port Connections. Pedestal mount, corrosion resistant bronze pumps: Use for engine cooling, washdown, circulation, & general purposes on-board or dockside. Bronze or stainless steel shaft installed with permanently lubricated ball bearings for long life & heavy-duty service. Self-priming with ability to operate in either direction at variable speeds. Capacity ranges from 3 GPM to 83 GPM with varied port configurations and sizes. Most models have replaceable cams/wearplates for extended product life. Removable end cover for easy impeller service. Standard impeller for these pump models is neoprene. (some have alternative oil resistant nitrile impellers available.)

Plastic pump body. Designed to provide constant water pressure. 3/8" ports. Automatic flow from tank to faucet. 12 volt DC.

Designed for washdown or for livewell tanks.
Heavy-duty construction.
Ideal for commercial or pleasure boats.
1-1/2" inlet, 1-1/2" discharge outlet.
Rated for 3700 GPH.
Must be mounted below waterline.
Operates at low pressure; not self-priming.
24 volts DC.

Jabsco 50900 Fish Box evacuation pump. A single-diaphragm, 5 GPM plastic-body pump. Perfect for emptying the fisbox after a day's fishing. This self-priming pump is designed to pass debris, such as bait residue, ice particles, fish scales, etc. OK to run dry and equipped with a 360º rotatable head. 12 volt.

Keep your decks clean with this high-flow and high-pressure diaphragm pump kit.

A HD model that features a heavy-duty motor and cast aluminum lower housing.
Efficient, quiet and self-priming.
Runs dry without damage.
Quick-connect ports make it easy to install and service.
Kit includes 25 feet of coiled hose and a spray down nozzle.

Use for diesel fuel transfer, liquid transfer jobs, dockside pumping, dewatering or circulation, engine oil changing Fitted with oil resistant elastomers Self-priming, may be mounted above the waterline Heavy-duty ball bearings, thermal overload protection Continuous duty motor provides quiet operation & smooth flow Runs dry without harm to pump Includes plug-in ports for easy installation, two garden hose ports and two 3/4" hose barb ports Includes a 3/4" inlet strainer Weight: 6 lbs

Bronze construction. Nitrile impeller. Lip seal, stainless steel shaft. 1/2" ports, horizontal orientation.

Nitrile impeller.
115 vac.
Rated for 6 gallons a minute.
Easy to service and maintain.
Tolerates fairly abrasive wear.

Pump with neoprene impeller Bronze body - Stainless steel shaft Stainless steel lip or mechanical seals for shaft Shielded ball bearings - 1" IPT Weight: 6.2 lbs

Designed for up to 5 fixtures Smooth water flow, pumps over 3.3 GPM Delivers smooth, steady water flow from 1 to 3 GPM without the need for an accumulator tank Special internal bypass feature eliminates pulsating water and pressure switch chatter Install with new Flojet strainer (not included) to protect pump from debris. Dimensions: 3.75" H x 6.3" W x 8.2" L Weight: 3.9 lbs

iL500 Plus pump. Suitable for diesel, salt or fresh water. Rated for 500 gallons per hour. Includes: - Pump - Spray nozzle - 4 meter cable with battery clips - 4 meter lay-flat hose. 3/4" ports. 12 volts.

Use for engine cooling, wash down, circulation, and general purposes on-board or dockside Pedestal mount, corrosion resistant bronze pumps Self-priming and portable, very versatile Removable end cover allows easy impeller service Pump heads are built of bronze materials 62 GPM, 1-1/4" NIPT Port, 1" shaft, face seal, brass cam and impeller insert Weight: 12.6 lbs

For use with 1 to 5 gallon accumulator tank. Designed for 6 or more fixtures. Quiet, smooth flow. Not harmed if it runs dry. Strainer included. Plug-in ports, easy to install. May be attached to garden hose or 3/4" hose barbs.

Can deliver almost 7 GPM at open flow. Equipped with pressure-cast bronze body. Features a reusable O-ring type end cover seal. 1/2" internal pipe thread and 1" external hose barb. Includes 2 port adapter. 12 volt DC. Weight: 6.06 lbs

Replaceable wear plate to extend service when handling abrasive fluids
9.5 GPM - 115 Volt Motor - 1/3 HP - 1/2" NIPT
Dimensions: 7-3/4"H x 7-1/4"W x 10-1/2"L

A compact, general-purpose pump. Bronze body. Nitrile impeller. 3/8" ports. Rated for 3.4 gallons per minute at 10 feet. Stainless steel shaft. 6 foot cord, with AC plug.

For use with 1 to 5 gallon accumulator tank Designed for 6 or more fixtures Quiet smooth flow No harm if runs dry. Strainer included. Plug-in ports, easy install: 2 for garden hose and 2 for 3/4" hose barb. Weight: 6 lbs

Electromagnetic clutch pumps equipped with a powerful electric clutch for convenient remote operation 12 volt pump Capable of operating through a wide range of speeds and in either rotational direction. Dimensions: 2A Pulley Belt Grooves - 2" NIPT - 83 GPM Weight: 30.5 lbs

Jabsco general-purpose pump. Used for cooling, wash down, circulation and more. Pedestal-mount, corrosion-resistant bronze construction. Self-priming and portable: very versatile. Removable end cover allows easy impeller servicing. 1" shaft, 1-1/4" NIPT port, rated for 62 GPM. Weight: 10.19 lbs.