Octagonal laid-back trigger crab pot.
Three high ramp entrance tunnels with laid back triggers, built-in bait tube.
11 gauge vinyl-coated wire construction.
Side door for crab removal, top door for bait access.
Good for overnight soaks and strong current areas.
Built-in bait tube is built from 1/2" x 1" bright yellow mesh.
High ramp tunnel design is fast-catching yet holds crab securely.
The yellow bait tube brings them in and the ramps keep them there.
Dimensions: 13" X 30".

Not intended for commercial use.

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

An octagonal shrimp pot with four tunnel entrances.
Exclusive ladder-ramp openings make this pot a top producer.
Has plenty of room to hold lots of shrimp.
High-quality vinyl-coated 14 gauge steel wire construction.
6" X 17" round bait tube, with a separate opening.

Overall dimensions: 30" X 17".

Not intended for commercial use. Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

An octagonal shrimp pot with four tunnel entrances.
Exclusive ladder-ramp openings make this pot a top producer.
Has plenty of room to hold lots of shrimp.
High-quality vinyl-coated 14 gauge steel wire construction.
6" X 17" round bait tube, with a separate opening.
4" entrances.
Equipped with a "rottin' cotton" escape hatch that will allow shrimp to escape if pot is lost.
 
Overall dimensions: 30" X 17".
 
Not intended for commercial use. Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Steel T-handle clam gun.
Measures 31" in height.
With a 5" X 15" long barrel.
Reinforced for strength at all joints.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps
16 gauge, 12" wide.
1" X 1" spacing.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps.
16 gauge, 24" wide.
1" X 1/2" spacing.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps.
16 gauge, 36" wide.
1" X 1/2" spacing.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.'

NOTE: Due to the size of this product, shipping via UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps.
14 gauge, 24" wide.
1" X 1" spacing.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps.
16 gauge, 24" wide.
1" X 1" spacing.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps.
14 gauge, 30" wide.
1" X 1" spacing.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

NOTE: Due to the size of this product, shipping via UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps.
14 gauge, 30" wide.
1" X 1" spacing.
Color: Green.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

NOTE: Due to the size of this product, shipping via UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps.
16 gauge, 30" wide. 1" X 1" spacing.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps.
14 gauge, 36" wide. 1" X 1" spacing.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps.
16 gauge, 36" wide. 1" X 1" spacing.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps.
16 gauge, 24" wide.
1/2" X 1/2" spacing.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps.
14 gauge, 48" wide.
1" X 2" spacing.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

NOTE: Due to the size of this product, shipping via UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps.
11 gauge, 36" wide.
3" X 3" spacing.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

C-rings, AKA clinch or hog rings.
Stainless steel.
Size: Large, 3/4" opening.
Typically sold by the pound; approximately 530 large rings per pound.

C-rings, AKA clinch or hog rings.
Stainless steel.
Size: Medium, 1/2" opening.
Typically sold by the pound; approximately 745 medium rings per pound.

C-rings, AKA clinch or hog rings.
Stainless steel.
Size: Small, 3/8" opening.
Typically sold by the pound; approximately 870 small rings per pound.

Durable, polypropylene sinking crab line.
High strength, low stretch.
Good abrasion resistance.
Diameter: 1/4".
Tensile strength: 1,200 lb.
Color: Gray with orange tracer.
Length: 600 ft.

Durable, polypropylene sinking crab line.
High strength, low stretch.
Good abrasion resistance.
Diameter: 5/16".
Tensile strength: 1,600 lb.
Color: Gray with orange tracer.
Length: 100 ft.

Durable, polypropylene sinking crab line.
High strength, low stretch.
Good abrasion resistance.
Diameter: 5/16".
Tensile strength: 1600 lb.
Color: Gray with orange tracer.
Length: 400 ft.

Durable, polypropylene sinking crab line.
High strength, low stretch.
Good abrasion resistance.
Diameter: 5/16".
Tensile strength: 1600 lb.
Color: Gray with orange tracer.
Length: 600 ft.

Crab gauge ensures compliance with crabbing regulations.
Durable polypropylene gauge is notched.
Quick measure of crab shells: 5-3/4", 6" & 6-1/4".
Diagrams on gauge for gender identification.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

Crab gauge ensures compliance with crabbing regulations.
Durable polypropylene gauge is notched.
Quick measure of crab shells: 5-3/4", 6" & 6-1/4".
Diagrams on gauge for gender identification.
Aluminum construction.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

15". For cooking crabs in deep pots. Black enamel coating for a long life of use.

So you've decided to go razor clam digging... good for you! You definitely need the right gear before you go.

The basic setup for a day of razor clamming includes:
 1) the correct license
 2) a clam shovel or clam gun
 3) a clam net bag to hold your catch

The Danielson clam shovel is one option of that necessary gear (the other option is a clam gun).

So how do you use it?

Once you've spotted a razor clam "show" (a donut, spot, or dimple) you need to follow these steps to pry out your molluscs. First: put the shovel's blade tip about 5 inches from your chosen spot with the BACK of the shovel facing the ocean -- so the handle will be facing away from the waves, probably toward the sand dunes. Next, put your back into it! Push the clam shovel blade straight down and drop down to one knee. Then, gently rock the clam shovel back and forth to make it easy to push down further. Be careful! You need to keep the shovel vertical (straight up-and-down) to make sure you don't break the razor clam shell. Finally, lift several scoops of sand out of the hole in a sliding fashion. It's a sort of lifting/rocking motion -- don't worry, you'll get a feel for it. Once you can fit your hand down the hole, quickly reach for your prize!

The Danielson clam shovel blade is strong steel and the 41" handle is solid ash wood, so you know it will hold up to sand and the occasional rock. The 9" long blade tapers from a 5" back to a 4" tip, and is securely fastened to the handle with rivets.
 
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

It's razor clam season! When the weather starts getting colder, it's time to head to the coast!

The Pacific razor clam is one of the most popular types of shellfish harvested in Washington state. They're super meaty with a narrow, slightly curved shell -- much like the handle or blade of an old-style straight razor. (The edge of the clamshell can be "razor-sharp" too, so watch your fingers when you're digging!)

The folks that live in the Pacific Northwest are lucky to have one of the best razor clam locations in the world. Digging for these delicious clams is a fun activity suitable for all members of your family, from kids to grandparents. Depending on where you go, you might see as many as a thousand other razor clam seekers sharing the beach. But don't worry: there are plenty of razor clams for everyone.

So how do you prepare to go razor clam digging?

You definitely need the right gear before you go.
The basic setup for a day of razor clamming includes:
 1) The correct license
 2) A clam shovel or clam gun
 3) A clam net bag to hold your catch

First, make sure you have the proper Washington state license. You will need a razor clam license to harvest clams legally (or one of the shellfish/seaweed combo licenses, there are several different kinds). You can order one online, by phone, or at an authorized license dealer. Once you have it, you'll need to keep that license in your possession while you're digging and after you've caught your limit (in case a ranger needs to inspect it).

Next, you'll need a tool to actually dig down and pull those elusive clams out of the sand. The Danielson clam gun is one option of that necessary gear (the other option is a clam shovel).

This clam gun has been engineered specifically for removing razor clams from sandy ocean beaches. Its solid all-steel construction makes it strong enough to burrow into any shore in pursuit of shellfish.

Measuring 31" in length, it features a 5" x 15" barrel with a 1-3/16" x 10" T-handle.

Now, like the old-time clam expert says: "Ya can't dig ya clams at high tide." After you've found your spot at LOW tide, go searching along the shore for dimples in the sand.

So how do you use a clam gun?

Set your clam gun barrel off-center with more sand on the side facing the water. Push down while twisting back and forth, rocking in a circular manner. Once the barrel is as deep as you can go, block the air vent on the underside of the handle with your finger, then pull straight up. When you remove your finger from the vent hole, a core of sand will drop out onto the beach -- and this is where your razor clam will be, if you've got the clammer's luck.

If you want to know more about clam gun usage, try watching a video or two before you go.

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

For both crab and shrimp traps.
Proven effective and convenient.
Cylinder design of vinyl coated mesh.
Attaches with a snap.
Has a screw-on lid for opening to fill with bait.
Dimensions: 3-5/8" x 6".

For both crab and shrimp traps.
Proven effective and convenient.
Cylinder design of vinyl coated mesh.
Attaches with a snap.
Has a screw-on lid for opening to fill with bait.
Dimensions: 3-5/8" x 9".

For both crab and shrimp traps. Proven effective and convenient. Cylinder design of vinyl coated mesh. Attaches with a snap. Has a screw-on lid for opening to fill with bait. Dimensions: 4-5/8" x 9". Weight: .33 lb.

Crabs easily scale sloped sides, acts as inescapable pen.
Polypro net, sides have 5 strong metal supports.
Comes with harness and float.
Vinyl coated steel rings.
18" upper ring, 34" lower ring.
16" deep.

Not intended for commercial use.
Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

ABS plastic. 
Standard red and white. 
Has a reflective band in the middle. 
Diameter: 5-1/2". 
Height: 12-1/4". 
1" diameter hole.

Red and white crab float.
Buoyancy: 6 lb., 8 oz.
Dimensions: 5" X 11".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

It's razor clam season! When the weather starts getting colder, it's time to head to the coast!

The Pacific razor clam is one of the most popular types of shellfish harvested in Washington state. They're super meaty with a narrow, slightly curved shell -- much like the handle or blade of an old-style straight razor. (The edge of the clamshell can be "razor-sharp" too, so watch your fingers when you're digging!)

The folks that live in the Pacific Northwest are lucky to have one of the best razor clam locations in the world. Digging for these delicious clams is a fun activity suitable for all members of your family, from kids to grandparents. Depending on where you go, you might see as many as a thousand other razor clam seekers sharing the beach. But don't worry: there are plenty of razor clams for everyone.

So how do you prepare to go razor clam digging?

You definitely need the right gear before you go.
The basic setup for a day of razor clamming includes:
 1) The correct license
 2) A clam shovel or clam gun
 3) A clam net bag to hold your catch

First, make sure you have the proper Washington state license. You will need a razor clam license to harvest clams legally (or one of the shellfish/seaweed combo licenses, there are several different kinds). You can order one online, by phone, or at an authorized license dealer. Once you have it, you'll need to keep that license in your possession while you're digging and after you've caught your limit (in case a ranger needs to inspect it).

Next, you'll need a tool to actually dig down and pull those elusive clams out of the sand. The Danielson clam gun is one option of that necessary gear (the other option is a clam shovel).

This clam gun has been engineered specifically for removing razor clams from sandy ocean beaches. Its ultra-light corrosion-resistant aluminum construction make it easy to transport, while staying strong enough to burrow into any shore in pursuit of shellfish.

Measuring 31" in length, it features a 5" x 15" barrel with a 1-3/16" x 10" T-handle with a polycarbonate lining to pad your hands a little bit. (Some people consider the aluminum Danielson razor clam gun to be the Cadillac of clam guns.)

Now, like the old-time clam expert says: "Ya can't dig ya clams at high tide." After you've found your spot at LOW tide, go searching along the shore for dimples in the sand.

So how do you use a clam gun?

Set your clam gun barrel off-center with more sand on the side facing the water. Push down while twisting back and forth, rocking in a circular manner. Once the barrel is as deep as you can go, block the air vent on the underside of the handle with your finger, then pull straight up. When you remove your finger from the vent hole, a core of sand will drop out onto the beach -- and this is where your razor clam will be, if you've got the clammer's luck.

If you want to know more about clam gun usage, try watching a video or two before you go.