13.5" black 3 spoke steering wheel with
center trim cap.
Hard PVC grip.
Beautiful, high-detail styling.
Rugged construction for marine use.
U.V. and corrosion resistant materials.
Stylish center medallion included.
Fits standard 3/4" tapered shaft.
Suitable for mechanical steering.

This 13.5" steering wheel features a
3-spoke design with a 25° dish angle and a
integral steering knob.
Standard 3/4" tapered shaft.
Constructed of corrosion resistant formed 304
stainless steel.
Stainless steel cap.

Polished stainless steel construction.
6 spokes.
10° dish with 3/8" spokes.
Black center cap.
Standard 3/4" tapered shaft.
Diameter: 18".
#1521811.

This 15" steering wheel features a 6-spoke
design with a 10° dish and a decorative black cap.
Fits standard 3/4" tapered shaft.
Constructed of corrosion resistant formed
304 stainless steel.

This 11" steering wheel features a 5-spoke
design with a 25° dish and a decorative black cap.
Fits standard 3/4" tapered shaft.
Constructed of corrosion resistant formed
304 stainless steel.

This 15" steering wheel features a 6-spoke design
with a 25° dish.
Fits standard 3/4" tapered shaft.
Constructed of corrosion resistant formed 304
stainless steel with foam covering.
Plastic cap.

This 15" steering wheel features a 5-spoke design
with a 25° dish.
Fits standard 3/4" tapered shaft.
Constructed of corrosion resistant formed 304
stainless steel with foam covering.
Plastic cap.

SeaStar/BayStar hydraulic steering fluid is formulated to provide the best performance for your SeaStar/BayStar steering system. A perfect blend of viscosity stabilizers, anti-wear agents and corrosion inhibitors will ensure maximum steering life performance. SeaStar hydraulic steering fluid can be used in Hynautic, BayStar and BayStar Plus steering systems.

Please note that SeaStar Capilano systems use Dexron II ATF, not SeaStar steering fluid.
Kinematic viscosity: 14.1-15.1 @ 40C mm2/s - 15W.
Size: 1 gallon.

Steering wheel maneuvering knob fits
Sea-Dog® steering wheels 230111, 230115,
230211, 230212, 230215, 230313, and 230315.
Attaches to the wheel for use in situations where
maneuvering is excessive, allowing the driver to
turn the steering wheel more quickly.
Constructed of corrosion resistant investment cast 316
stainless steel with black nylon insert.
Fits 1" x 3/4" oval tubing.
Display packed.

3/4"  taper to 1" taper steering wheel bushing.  
Brass construction.

3/4" taper to 1" straight steering wheel bushing.  
Brass construction.

This kit is designed to mount the helm
at a 20 degree angle to the mounting surface.
For raised or recessed mounts, four possible
mounting configurations are available.
Horizontal recessed mount requires HA5408 drain kit.
Not for use with BayStar helm pumps.

Designed to fit all brands of hydraulic trim tabs. Includes: - 12 volt motor - InstaTrim oil circulation pump (400 psi) - Solenoid valves - 18" wire harness with color coded wires - Biodegradable transmission oil and funnel - All fittings needed for installation.

Spent travel tube for NFB 4.2, NFB SAFE-T II, and HPS rotary helms.

Required for converting a SyTen steering cylinder to a current SeaStar Steering cylinder.

For Teleflex installation purposes. Includes O-rings.

Replacement shaft seal kit. Fits HRP-60 helms.

Replacement shaft seal kit. Fits HRP30-2 helms.

Replacement shaft seal kit. Fits HRP-38 helms.

Replacement shaft seal kit. Fits HRP-23 helms.

18" SeaStar cylinder hose kit.
Used to connect 3/8" diameter copper tubing to SeaStar steering cylinders.
Adapters and compression nuts included.

Fitting kit for 2nd station/autopilot to inboard or sterndrive applications.
This kit is used with systems plumbed with 3/8" diameter nylon or copper tube only.

Fitting kit to add a 2nd station or autopilot to an outboard steering system.
To be used when the system has been plumbed with SeaStar outboard steering hose only.
Includes non-vented fill plug for lower station helm.

3/8” compression X 1/4" MNPT straight adapter fitting.
Three per package. 

3/8" compression union.
Three per pack.

Elbow. 1/4" X 3/8". Three per package.

1/4” MNPT X 3/8” compression X 3/8" compression tee.
Three per package.

3/8" X 3/8" X 3/8". Three per package.

3/8" compression X 1/4" MNPT X 3/8" compression tee.
Three per package.

Female #6 SAE 45° swivel X 5/16" ID hose.
Brass construction.                      
Field attachable.                        
Fits MSH-5 hose.  

Model 7003.
Includes O-rings and a front seal.

Steering cable tube support kit with mounting bracket.
For older model outboards without tilt tubes,
low HP outboards or applications where design
interferes with standard tilt tube mounting.
Galvanized steel.

Torque brake kit for a Seastar Solutions Back Mount Rack steering system.
Includes parts and instructions needed for a full installation.

This kit is used to service many BayStar and SeaStar helms.
Includes:
- Quad ring seal
- Woodruff key
- 5/8" nut
- A top plate
- 3 screws
- Detailed instructions for servicing a SeaStar helm.

For hydraulic control systems. Diameter: 1/4".

Rear-mounted gauge. Displays 0 - 60 PSI.