A direct interchange with Eaton/Charlynn (and other brands).
May be used for series or parallel applications.
FluiDyne's low speed, high-torque motors provide superior performance with:
- Low-pressure start-up
- High-pressure shaft seals
- Low noise with proprietary fluid distribution system
- Longer life with special driver-link design
- Easy installation with compact design.
Displacement: 14.1 CID.
1" straight keyed shaft.
4-bolt square flange.
Manifold ports.

A direct interchange with Eaton/Charlynn (and other brands).
May be used for series or parallel applications.
FluiDyne's low speed, high-torque motors provide superior performance with:
- Low-pressure start-up
- High-pressure shaft seals
- Low noise with proprietary fluid distribution system
- Longer life with special driver-link design
- Easy installation with compact design.
Displacement: 11.3 CID.
1" straight keyed shaft.
4-bolt square flange.
Manifold.

Zinc-plated steel.
Elbow.
#8 MJIC to #12 MBSPP.

A direct interchange with Eaton/Charlynn (and other brands).
May be used for series or parallel applications.
FluiDyne's low speed, high-torque motors
provide superior performance with:
- Low-pressure start-up
- High-pressure shaft seals
- Low noise with proprietary fluid distribution system
- Longer life with special driver-link design
- Easy installation with compact design.
Displacement: 11.3 CID.
1" straight keyed shaft.
2-bolt SAE-A flange.
1/2" NPT ports.

A direct interchange with Eaton/Charlynn (and other brands).
May be used for series or parallel applications.
FluiDyne's low speed, high-torque motors
provide superior performance with:
- Low-pressure start-up
- High-pressure shaft seals
- Low noise with proprietary fluid distribution system
- Longer life with special driver-link design
- Easy installation with compact design.
Displacement: 9.7 CID.
1" straight keyed shaft.
2-bolt SAE-A flange.
1/2" NPT ports.

A direct interchange with Eaton/Charlynn (and other brands).
May be used for series or parallel applications.
FluiDyne's low speed, high-torque motors provide superior performance with:
- Low-pressure start-up
- High-pressure shaft seals
- Low noise with proprietary fluid distribution system
- Longer life with special driver-link design
- Easy installation with compact design.
Displacement: 22.6 CID.
1" straight keyed shaft.
2-bolt SAE-A flange.
1/2" NPT ports.

A direct interchange with Eaton/Charlynn (and other brands).
May be used for series or parallel applications.
FluiDyne's low speed, high-torque motors provide superior performance with:
- Low-pressure start-up
- High-pressure shaft seals
- Low noise with proprietary fluid distribution system
- Longer life with special driver-link design
- Easy installation with compact design.
Displacement: 17.9 CID.
1" straight keyed shaft.
2-bolt SAE-A flange.
1/2" NPT ports. 

A direct interchange with Eaton/Charlynn (and other brands).
May be used for series or parallel applications.
FluiDyne's low speed, high-torque motors
provide superior performance with:
- Low-pressure start-up
- High-pressure shaft seals
- Low noise with proprietary fluid distribution system
- Longer life with special driver-link design
- Easy installation with compact design.
Displacement: 14.1 CID.
1" straight keyed shaft.
2-bolt SAE-A flange.
1/2" NPT ports. 

Aluminum construction. Diameter: 3".

Length: 10 feet.
1/2" pitch.
Size: #40.
Meets ASME/ANSI B29.1 standards.
Stocked in 10' lengths; available by the inch or foot.

Connects the two ends of a roller chain. Regular steel. Size: #60.

Transparent polyamide resin construction.
Guard is steel with black finish.
Rated for a maximum operating temperature of 212° F.
Compatible with petroleum-based fluids.
Maximum pressure: 44 PSI.
Nitrile seal.
Size: 5".

Buna N spider insert cushion for Lovejoy coupling hub. Insert material is nitrile butadiene rubber. Oil resistant and highly resiliant for a long life. Coupling size: L075.

Aluminum body with borosilicate glass. Clear fluid-filled thermometer. Dual scale 0° to 220° F and -20° to 110° C graduations. Suitable for most hydraulic and machine oils. Dimensions: 5" x 3.37" X 6.62".

Elastomeric jaw-type flexible coupling hub.
The industry standard.
Easy to assemble / disassemble.
Contain an inserted rubber spider cushion.
Will continue to work even if cushion fails.
Model L095.
Shaft size: 5/8".

Connects the two ends of a roller chain. Regular steel. Long link. Size: #50.

Aluminum construction.
#12 3/4" NPT ports.
#16 1-5/16" cartridge port.
For use with:
- SPESJSA00 cartridge
- SPESJS2C00 cartridge
- SPE30534 12 volt coil
- SPE300AA96A 24 volt coil.
C-16-2 #16 Cavity.

Elastomeric jaw-type flexible coupling hub. The industry standard. Easy to assemble / disassemble. Contain an inserted rubber spider cushion. Will continue to work even if cushion fails. Model L095. Shaft size: 1/2".

All stainless steel construction.
B-type seals.
1-1/2" bearing.

Elastomeric jaw-type flexible coupling hub. The industry standard. Easy to assemble / disassemble. Contain an inserted rubber spider cushion. Will continue to work even if cushion fails. Model L095. Shaft size: 7/8".

Allows flow in one direction. Requires 65 PSI to initiate flow. Size: 1".

Joins two pieces of chain by one pitch increment. Regular steel. Size: #50. Meets ASME/ANSI B29.1 standards.

Multiple porting options:
- 1 #20 female SAE Boss o-ring port.
- 3 #16 female SAE Boss o-ring ports.
CNC aluminum construction.

Cylinder spool.
D05 valve pattern.
Closed center.
Rated for 3000 psi.
18.5 GPM MAX.
12 volt.

Joins two pieces of chain by one pitch increment. Regular steel. Size: #60. Meets ASME/ANSI B29.1 standards.

Used to connect 1-1/4" (14 teeth) to 1-1/4" (14 teeth).
Pump specific application.

Used to connect 1-1/4" (14 teeth) to 7/8" (13 teeth). 
Pump specific application. 

Length: 10 feet.
192 links.
Part number: GS50RIV.
Meets ASME/ANSI B29.1 standards.
Stocked in 10' lengths; available by the inch or foot.

Complete rotary handle assembly.
Stainless steel.
Size: Extra-large.

Connects the two ends of a roller chain. Regular steel. Long link. Size: #60.

12 volt solenoid coils. 50 GPM rated flow. 1" #20 SAE O-ring port. Aluminum body.

Works as a heat exchanger for fluid-to-fluid applications.
High-pressure cupro-nickel with zinc anode.
1" oil ports, rated for 375 PSI.
3" coolant/water ports.
Overall dimensions: 4" X 12".

Pressure compensated. Reverse flow checked. 3000 PSI maximum. 5 PSI crack pressure. Size: 3/8". Rated for 6 GPM.

Riveted roller chain.
Size: #80.
Stocked in 10' lengths; available by the foot.