7 gallon capacity.
Aluminum construction.
Liquid level/temperature gauge.
Vented fill cap.
Magnetic plug, 3/4", on bottom.
Optional suction and return on either side.
NPT 1-1/4" suction.
NPT 3/4" return.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Allows flow in one direction. Requires 5 PSI to initiate flow. Size: 1".

Assembled part #8134-SF. 5-481X / 1410 U-Joints. 9.5" minimum length, when collapsed. 3-2-159 end yoke. 2.75" pilot.

Normally open. 35 GPM. DIN 43650 / 18036 block connector. 12 volt DIN coil. 3000 PSI maximum. Does include body. SV3 16 0 12T 12DG SOL NO.

12 GPM max flow cartridge. 12 volt solenoid coil. Aluminum body with #8 SAE O-ring ports.

Elastomeric jaw-type flexible coupling hub. The industry standard. Easy to assemble / disassemble. Contain an inserted rubber spider cushion. Will continue to work even if cushion fails. Model L095. Shaft size: 3/4".

Carbon steel.
2-1/2" NPT.
Code 61.

Rear 2" wide flange for bolt-on or weld mount.
Two 3" NPT aluminum couplings for suctions.
Liquid level / temperature gauge.
Two 1/2" NPT ports for optional Murphy gauge on front.
3/4" NPT magnetic plug on bottom for drain.
Two 1" NPT case drain ports at mid-level on side.
One 1-1/2" NPT return port on side with downtube.
Tank has baffle in middle that separates the suction from the return and case drain ports.
Dimensions: 24" X 24" X 12".

Replacement Viton washers for BHW20-150-03 and BHW2015000. 
Resist oils, fuels, lubricants and most mineral acids. 

Transforms a T port to HPCO configuration.
Manufacturer's part number: 413010207.

Connects the two ends of a roller chain. Stainless steel. Long link. Size: #50.

Assembled part #9012-SF. 5-480X / 1350 U-Joints. 9.5" minimum length, when collapsed. 3-2-119 end yoke. 2.75" pilot.

Pressure compensated. Reverse flow checked. 3000 PSI maximum. 5 PSI crack pressure. Size: 1/2". Rated for 15 GPM.

For use with #50BS chain. 12 teeth. Shaft diameter: 1".

Allows flow in one direction. Requires 5 PSI to initiate flow. Size: 1/4".

Includes seals.

Works as a heat exchanger for fluid-to-fluid applications.
High pressure cupro-nickel with zinc anode.
1/2" oil ports.
1-1/4" coolant/water ports.
Overall dimensions: 2" X 12-1/4".

Allows flow in one direction. Requires 5 PSI to initiate flow. Size: 3/4".

Stainless steel.
Length: 10 feet.
160 links.
Part number: GS60RIV (SS).
Meets ASME/ANSI B29.1 standards.
Stocked in 10' lengths; available by the inch or foot.

Front end engine to drive line adapter.
Manufacturer #7E3695.

Compatible with Caterpillar engines: 3116, 3126, 3126B, 3126E, C7, C9.

Accepts Spicer 1310 Series 2-3/8" Pilot.

Stainless steel.
Length: 10 feet.
1/2" pitch.
Size: #40. Meets ASME/ANSI B29.1 standards.
Stocked in 10' lengths; available by the foot.

Includes:
- Split flange
- Four nuts and washers
- O-ring.
Size: #8.

Open center. Operates port and starboard buckets. Aluminum body. 12 volt coils.

Includes: - Split flange - Four nuts and washers - O-ring. Size: #16.

Includes: - Split flange - Four nuts and washers - O-ring. Size: #12.

Includes: - Split flange - Four nuts and washers - O-ring. Size: #20.

Open center. Aluminum body. Interfaces with autopilot systems or jog lever. 12 volt coils. Adjustable 1000 PSI relief valve.

Carbon steel. 
2" FNPT. 
Code 61.

Hydraulic pump bracket. Cast from marine-grade aluminum. Designed with a 3-1/4" pilot. For use with Jabsco pumps. Weight: 4.63 lbs.

A versatile sectional valve. 
Available in many configurations. 
Fully marinized, up to 12 sections. 
Stainless steel spools. 
Maximum flow rate: 40 GPM. 
Maximum pressure: 5000 PSI. 
Optional power beyond. 
Available in multiple spool types. 
#12 SAE ORB. 
Rotary actuated. 
Motor spool.

Aluminum construction. 
#6 SAE ORB ports. 
#8 SAE ORB cartridge port. 
For use with: 
- SPE02164223.

Connects the two ends of a roller chain. Stainless steel. Size: #60.

Elastomeric jaw-type flexible coupling hub. The industry standard. Easy to assemble / disassemble. Contain an inserted rubber spider cushion. Will continue to work even if cushion fails. Model L099. Shaft size: 1".

2-3/4".

Intended for use with an OEM Controls MS2 joystick.

Seal kit.