Optimal foam thickness.

Six holes and semi-open grain coating for less clogging.
Will mitigate damage on profile sanding.
For primer sanding or clear coats.

Grit: 320C.
Size: 6".

50 discs per box.

GelMagic epoxy, designed for use with porous materials.
Simple and easy to measure (mixes in a 2:1 ratio).
Works great on overhead and vertical surfaces.
Designed for high peel strength.
Resistant to embrittlement, and impact and creep resistant.
May be post-cured up to 140º F for even greater performance.
Size: 1.5 pint kit.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Horizon Blue." Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Bright Blue." Size: 5 gal.

A thixotropic, glycol-isophthalic polyester gelcoat. For spray applications. Designed for pigmented, medium to highly chromatic colors. Color: White. Size: 1 gal.

Single-component alkyd gloss topcoat. Designed to protect and enhance marine exteriors. Great weathering properties, easy to apply, drys quickly. Not meant to resist severe chemical or immersion conditions. Color: 2968 Dark Gray. Size: 1 gal.

Optimal foam thickness.

Semi-open grain coating for less clogging.
Will mitigate damage on profile sanding.
For primer sanding or clear coats.
 
Aluminum oxide grit: 600C.
Size: 5".

50 discs per box.

Sparta scratch wire brush. Compact design for cleaning in tight places. Provides quick, agressive removal of grease and deposits. Carbon steel wire bristles can handle any job. Handle color: Blue. Size: 12".

Contractor quality. For paint scraping and cleaning. Hardwood "shoe" handle. Steel scraper on end Steel bristles, 4 X 16 rows. Weight: .35 lb.

ePaint EP-2000 antifouling paint, white.
An advanced water-based antifouling formula.
Recommended for use on all boats and hull types.
Hard, mar-resistant finish: great for racing boats.
Gives long-lasting protection and cleans easily.
Size: 1 qt.
Color: White.

Red Line 5" RhynoGrip 5-hole vacuum discs. Recommended for sanding and finishing of fillers and wood. Aluminum oxide grit, P 60 D. D weight paper. 50 discs per box.

Red Line 5" RhynoGrip 5-hole vacuum discs. Recommended for sanding and finishing of fillers and wood. Aluminum oxide grit, P 80 C. C weight paper. 50 discs per box.

Chiseled tip. Soft China white bristle. White plastic Kaiser handle. Brass ferrule. Great for varnish, stains, enamels, and solvents. Size: 1-1/2"

Amerlock 2 is a fast-drying surface tolerant epoxy. Adheres to tight rust and prepared damp surfaces. Catalyst helps cure and set epoxy resin. Size: 2-1/2 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Offshore Yellow." Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Off-White." Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "RD-1 Bright Red." Size: 5 gal.

General-purpose, low-VOC thermosetting adhesive.
Used to bond virtually all porous and non-porous substrates.
Provides a tough, chip-resistant, flexible bond.
Size: 1 gallon.

ePaint SN-1 copper-free antifouling bottom paint.
For heavy-duty use in harsh marine environments.
Formerly only available for the U.S. government.
Features ePaint's patented photo-active technology and Sea Nine 211N, a broad-spectrum biocide.
Compatible with other antifouling paints, easy to apply.
Size: 5 gal.
Color: White.

Red Line 6" solid grip discs. Recommended for sanding and finishing of fillers and wood. Aluminum oxide grit, P 1200 A. Lubricated with anti-clogging solution. A weight paper. 50 discs per box.

Diameter: 5".
10 mm thick.
32 holes, 1 big center hole.
Helps Abranet discs stick better and protects backup pads from premature wear.
Designed for use with the Mirka Ceros 5" compact electric random orbital sander.

Fast-drying, metallic copper aerosol sealant. Helps dissipate heat and fill surface irregularities. Resists all types of petrochemicals. Temperature range -50°F to 500°F. Size: 12 oz.

RhynoGrip Red Line high-efficiency 3" sanding discs.
Sanding and finishing of fillers, primers, and wood.
Lubricated for high performance.
Aluminum oxide grit, P 400 A.
Diameter: 3".
50 discs per box.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Safety Orange." Size: 1 gal.

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: National Blue. Size: 1 gal.

Tear, moisture, and solvent resistant. Perfect for wet sanding. Provides excellent cornering. Try it for die cutting or custom jobs. Clean removal means crisp paint lines. Width: 1-1/2". Length: 180 feet.

Traditional alkyd-based yacht enamel.
Bright high gloss finish
Excellent flow and leveling properties
Superior hide, gloss and color retention.

Traditional alkyd-based yacht enamel
Bright high gloss finish
Excellent flow and leveling properties
Superior hide, gloss and color retention

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: White. Size: 5 gal.

Multi-hole, grip-faced pad. Medium density. For use with Abranet abrasives. Diameter: 8".

Polyester film backing material. Designed to be a flexible, smooth abrasive. Resistant to clogging. Great for hard tooling gelcoats and scratch-resistant clear Manufactured using environmental-friendly coating system. Suitable for wet or dry sanding. Grit: 1000. Size: 5". 50 discs per box.

Polyester film backing material. Designed to be a flexible, smooth abrasive. Resistant to clogging. Great for hard tooling gelcoats and scratch-resistant clear Manufactured using environmental-friendly coating system. Suitable for wet or dry sanding. Grit: 1500. Size: 5". 50 discs per box.

Polyester film backing material. Designed to be a flexible, smooth abrasive. Resistant to clogging. Great for hard tooling gelcoats and scratch-resistant clear Manufactured using environmental-friendly coating system. Suitable for wet or dry sanding. Grit: 1200. Size: 5". 50 discs per box.