A two-part water-based epoxy primer / sealer.

May be used on concrete, masonry, fiberglass, wood and previously painted substrates.
This primer is recommended for your projects with Tuff Coat for proper adhesion.
Simple 1:1 mix.

1 quart kit.

Multi-purpose, two-part epoxy primer. Used above waterline. Undercoats for Interlux Perfection coating. Great for application to rough surfaces. Will resurface cracked or damaged gelcoat.

Corrosion-resistant primer for structural steel. Intended to be covered with alkyd topcoating. Single component, resists corrosion, sprays well. Contains no lead or chrome pigments. Suitable for exterior and interior steel surfaces. Color: White. Size: 1 gal.

Corrosion-resistant primer for structural steel. Intended to be covered with alkyd topcoating. Single component, resists corrosion, sprays well. Contains no lead or chrome pigments. Suitable for exterior and interior steel surfaces. Color: Red. Size: 1 gal.

High solids non-skid epoxy.
Heavy-duty grit helps shoes grip ramps/decks.
Used on aircraft carriers worldwide.
Two-part, cure and resin.
Color: Dark gray.
Size: 5 gal.

An "All-in-One" primer.
Single-part multipurpose primer for above the waterline.
Combines the features of separate substrate primers in one.
Adheres well to wood, fiberglass, metals on bare or painted surfaces.
Excellent covering capability, high build, good grain filling.
Provides corrosion protection on steel.
Color: White.
Size: 2 liters.

Corrosion-resistant primer for structural steel. Intended to be covered with alkyd topcoating. Single component, resists corrosion, sprays well. Contains no lead or chrome pigments. Suitable for exterior and interior steel surfaces. Color: Pearl Gray. Size: 1 gal.

Deep penetrating wood conditioner. Appropriate for interior and exterior use. Becomes integral part of wood and hardens wood. Does not leave surface film. Reduces chance of grain raising. Practically odorless/colorless. Will not crack, chalk, blister or peel. Pre-conditioning to staining. Size: 1 pint.

Deep penetrating wood conditioner. Appropriate for interior and exterior use. Becomes integral part of wood and hardens wood. Does not leave surface film. Reduces chance of grain raising. Practically odorless/colorless. Will not crack, chalk, blister or peel. Pre-conditioning to staining. Size: 1 quart.

Converts rust into a barrier layer of magnetite. A bonding agent for epoxy, acrylic, and oil-based finishes. Gives exceptional bonding with moisture cured polyurethanes. May be used as a rust converter, or paint / etch primer. Eliminates the need to mechanically blast to white metal. Not for use with zinc chromates or zinc phosphates. Size: 1 gal. Coverage: Approximately 200 square feet, at 10 mil.

Converts rust into a barrier layer of magnetite. A bonding agent for epoxy, acrylic, and oil-based finishes. Gives exceptional bonding with moisture cured polyurethanes. May be used as a rust converter, or paint / etch primer. Eliminates the need to mechanically blast to white metal. Not for use with zinc chromates or zinc phosphates. Size: 5 gal. Coverage: Approximately 1000 square feet, at 10 mil.

Provides excellent protection for bare metals by inhibiting corrosion.
Useful on aluminum, steel, iron, copper, bronze, lead, and more.
Forms a strong bond with underwater metals and running gear.
Dries to a smooth layer of zinc film, which will self-clean.
May be used above or below the waterline.
Size: 1 quart.
Color: Gray.

A two-part water-based epoxy primer / sealer.

May be used on concrete, masonry, fiberglass, wood and previously painted substrates.
This primer is recommended for your projects with Tuff Coat for proper adhesion.
Simple 1:1 mix.

1 gallon kit.

Amercoat 302 reinforced inorganic zinc primer. Zinc-rich primer used for protecting steel. Used on tanks, equipment, piping, ships, barges, Easily applied, low VOC, fast-dry. Provides outstanding corrosion resistance. Pre-mixed with zinc dust Mixing ratio, by volume: 1 part cure to 9 parts resin.

A multi-purpose two-part epoxy primer.
Suitable for use under all Interlux topside finishes
It can be used to resurface cracked and crazed gelcoat, and over clear epoxies to eliminate the effects of amine blush.
Size: 1 qt.

An "All-in-One" primer.
Single-part multipurpose primer for above the waterline.
Combines the features of separate substrate primers in one.
Adheres well to wood, fiberglass, metals: bare or painted surfaces.
Excellent covering capability, high build, good grain filling.
Provides corrosion protection on steel.
Color: Gray.
Size: 3/4 liter.

ePaint Multi-Purpose epoxy primer.
A robust, easy-to-use two part primer.
Perfect as a base coat for ePaint antifouling paint.
Provides water migration and corrosion protection.
Compatible with bottom paints, easy to apply.
Size: 1 gal.
Color: Red.

Adheres to ferrous metals: steel, cast iron, galvanized and stainless.
Protects against corrosion.
Wets, seals, and adheres to firmly attached rust.
Dries rapidly, allows multiple coats in 1 day.

Adheres to ferrous metals: steel, cast iron, galvanized and stainless.
Protects against corrosion.
Wets, seals, and adheres to firmly attached rust.
Dries rapidly, allows multiple coats in 1 day.

A heavy-duty two-part coating.
May be used on practically any part of a boat.
Excellent for protecting underwater metal from corrosion.
Forms a tight, durable chemical-resistant film.
56% solids by volume.
Size: 1 quart kit

A heavy-duty two-part coating.
May be used on practically any part of a boat.
Excellent for protecting underwater metal from corrosion.
Forms a tight, durable chemical-resistant film.
56% solids by volume.
Size: 1 gallon kit

Inhibits corrosion: use only on bare metals!
For use above or below waterline.
Dried film is 93% zinc.
Do not apply anti-fouling paint over zinc coat.

A versatile, highly penetrating air drying oil.
Can be used alone or added to paint.
Used alone it provides a tough, flexible finish.
Drives out excess moisture and air to stop rust.
Fills dry porous wood to stop paint peeling.
When added to any oil or alkyd based coatings, it gives increased wet edge time and improved flowing and adhesion.
Size: 1 liter.

ePaint Multi-Purpose epoxy primer.
A robust, easy-to-use two part primer.
Perfect as a base coat for ePaint antifouling paint.
Provides water migration and corrosion protection.
Compatible with bottom paints, easy to apply.
Size: 1 gal.
Color: White.

2 component epoxy-polyamide coating for use on sandblasted aluminum where maximum resistance to fresh or salt water is required
Smooth finish provides an excellent bonding surface for additional primers or topcoats
Excellent water, chemical and corrosion resistance for aluminum.
High performance Strontium chromate primer for all aluminum.
Size: 2 gallon kit.

General purpose tie coat primer.
Use above or below waterline.
Compatible with anti-fouling bottom paints.
Compatible with all types of single component topside finishes.

General purpose tie coat primer.
Use above or below waterline.
Compatible with anti-fouling bottom paints and all types of single component topside finishes.

Amercoat 302 reinforced inorganic zinc primer.
Zinc-rich primer used for protecting steel.
Used on tanks, equipment, piping, ships, barges,
Easily applied, low VOC, fast-dry.
Mixing ratio, by volume: 1 part cure to 9 parts resin.
Provides outstanding corrosion resistance.
Pre-mixed with zinc dust.

Amercoat 302 reinforced inorganic zinc-rich primer used for protecting steel.
Used on tanks, equipment, piping, ships, barges, and more.
Easily applied, low VOC, fast-dry.
Pre-mixed with zinc dust.
Converter, used with 1 gallon of resin.

Amercoat 302 reinforced inorganic zinc primer. Zinc-rich primer used for protecting steel. Used on tanks, equipment, piping, ships, barges, Easily applied, low VOC, fast-dry. Pre-mixed with zinc dust. Converter, used with 5 gallons of resin. Weight: 2.3 lbs.

ePaint Multi-Purpose epoxy primer.
A robust, easy-to-use two part primer.
Perfect as a base coat for ePaint antifouling paint.
Provides water migration and corrosion protection.
Compatible with bottom paints, easy to apply.
Size: 1 gal.
Color: Haze Gray.

Penetrates raw wood.
Gives improved stability and moisture resistance.
Prevents excessive absorption of undercoaters and varnishes.
Tung/linseed oil phenolic based resin.
Not for use on teak.
Applies easily by brush or spray.
Size: 1 quart.

Anticorrosive primer for underwater metal. Great for running gear and lower units. Superb corrosion barrier, reduces metal pitting. Usable over incompatible or unknown antifouling paints. Matte finish. Apply below waterline. Color: YPA984 Gray. Size: 1 gallon.

A unique two part epoxy primer coating.
Helps to prevent and repair gelcoat blistering.
Protects fiberglass hulls from water absorption.
Gives excellent barrier coat protection.
Contains "micro-plates" for extra protection.
Works as an anti-corrosive substrate primer for metals.
Dries quickly, with a short re-coat time.
Color: Gray.
Size: 1 gallon kit.

A unique two part epoxy primer coating.
Helps to prevent and repair gelcoat blistering.
Protects fiberglass hulls from water absorption.
Gives excellent barrier coat protection.
Contains "micro-plates" for extra protection.
Works as an anti-corrosive substrate primer for metals.
Dries quickly, with a short re-coat time.
Color: Gray.
Size: 1 quart kit.

Anticorrosive primer for underwater metal. Great for running gear and lower units. Superb corrosion barrier, reduces metal pitting. Usable over incompatible or unknown antifouling paints. Matte finish. Apply below waterline. Color: YPA984 Gray. Size: 1 quart.