For 1" Jabsco pumps. Fits: - 11860 series - 6050 series - 777 series - 7777 series.

Type 304 stainless steel.
Used with raw water strainers.
Dimensions: 2.6" X 9.4".

Water strainer replacement basket
Type 304 stainless steel.
Used with raw water strainers.
Dimensions: 3.1" X 10.1".

Type 304 stainless steel.

PVC. 1-1/2" dust plug.

PVC. Male 2" to FNPT.

Replacement inner seal for Jabsco pumps. For 11870 series pumps.

Gives structural stability in valve / thru-hole locations. Bottom port has straight threads to mate with thru-hulls. Top port has tapered threads to mate with ball valves. Use where in-line valves have been used as seacocks. Size: 1-1/2". Weight: 1.69 lbs.

Low-profile topside fuel tank. Creates a positive seal with a 2-1/4" fill neck. Features a 90 degree, 1/4 NPT fuel withdrawal elbow that rotates 360 degrees to eliminate fuel line hose kinking Designed for Boston Whalers, Carolina Skiff and Key West bench style, center console, deck and jon boat systems. Manufactured from a sturdy, high-density polyethylene. Tank is non-corrosive, unbreakable, and dent resistant. Capacity: 12 gallons. Dimensions: 23" X 14" X 14-1/2". 
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Attaches to intake hose to filter debris. Ideal for use when pumping dirty fluid. For use with "400" series Guzzler pumps. Delrin plastic construction. For 1-1/8" hose.

Heavy-duty rubber exhaust protecting flapper valve. Keeps water from entering exhaust outlet. Part No: 18-4458D. Size: 5" or 6".

Schedule 80 PVC construction. Diameter: 2". Length: 6".

PVC construction. Clear, see-through for easy inspection. Diameter: 2".

Heavy-duty rubber exhaust protecting flapper valve. Keeps water from entering exhaust outlet. Part No: 18-4457D. Size: 4".

For Perko raw water strainers. Includes 1" and 1-1/4" gaskets. For #6 and #7 strainers.

Cover bolt, wing-nut and washer. For use with 493 series water intake strainers. Fits models 6 and 7 only. Bolt length is 1-1/4".

Plastic construction. For use with a hose. Broad flange. Hose size: 1/2".

Brass body, large port, blow-out proof stem, and screwed ends. Service in steam, water, oil and gas. 2 piece screwed type brass body. Viton double O-ring stem packing. Zinc-plated hardened, plastic-covered lever handle remains cool in high temperature installation. Hard chromium plated brass ball. Federal specs: WW-V-35, Type 11, Class A, Style 3 Weight: 4.5 lbs

Stainless steel and rubber construction.
Diameter: 1".
Display packaged.

Plastic construction. For use with a hose. Broad flange. Hose size: 1-1/2".

Plastic construction. For use with a hose. Broad flange. Hose size: 1".

Plastic construction. For use with a hose. Broad flange. Hose size: 3/4".

Schedule 80 PVC construction. Diameter: 2". Length: Close.

Replacement 5-hole gasket and screws For Moeller sending units. Weight: .1 lb.

Schedule 80 PVC construction. Diameter: 2". Length: 4".

Heavy-duty rubber exhaust protecting flapper valve. Keeps water from entering exhaust outlet. Part No: 18-4456D. Size: 3".

Angled "T" fitting. Marine-grade plastic construction. Fits marine sanitation hosing, designed for maximum flow. 1-1/8" inch hose barbs on all ends. Weight:

Gives structural stability in valve / thru-hole locations. Bottom port has straight threads to mate with thru-hulls. Top port has tapered threads to mate with ball valves. Use where in-line valves have been used as seacocks. Size: 1-1/4". Weight: 1.2 lbs.

Aluminum. 1-1/2" dust plug.

Jabsco Par-Max switch. Rated for 40 PSI. For 31600 series water systems.

Cast bronze.

Aluminum. Male 2" to FNPT.

Low-profile topside fuel tank. Creates a positive seal with a 2-1/4" fill neck. Features a 90 degree, 1/4 NPT fuel withdrawal elbow that rotates 360 degrees to eliminate fuel line hose kinking Designed for Boston Whalers, Carolina Skiff and Key West bench style, center console, deck and jon boat systems. Manufactured from a sturdy, high-density polyethylene. Tank is non-corrosive, unbreakable, and dent resistant. Capacity: 12 gallons. Dimensions: 24" X 18" X 11-1/2". 
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Chrome plated bronze Removable 30 mesh stainless steel wire screen flame arrestor Hose Size: 5/8" Weight: .25 lb