Has a high capacity flow rate and horizontal-oriented ports. Rated for 4710 GPH. Self-priming up to 15 feet. Mechanical face type shaft seal. Nitrile impeller. Fitted with single "B" groove pulley. 12 volt.

Neoprene. 8 blades. Dimensions: 3" X 2-9/16". Shaft diameter: 5/8".

Bilge Pro motor cartridge. For 500 gallon per hour pumps.

Marine bronze and stainless steel for reliability. Self-priming. 1-1/4" NPT input. 1" shaft. 1/2" cam.

For Jabsco pumps. Three per bag.

U-bolt style exhaust clamp. 
Secures exhaust tubing. 
Diameter: 7". 

Diameter: 3/4". 50 foot coil.

Standard Flow 90 Degree King Nipple 1/2" NPT x 1/2" or 5/8" hose - Bronze Weight .22 lbs

Nitrile. 8 blades. Diameter: 2-9/16".

Neoprene. 6 blades. Diameter: 2-9/16".

Inflates a four-man dinghy in 1-2 minutes. Supplied with an adaptor for all major boats. Reversible, will deflate dinghies flat. Single-handed operation. Rated for 550 liters / minute.

Cast bronze construction. Diameter: 2-1/2" male X 2-1/2" female.

Fire-retardant marine fuel hose.
Resists alcohol-enhanced gasoline.
High nitrile rubber construction.
Reinforced with two spirals of synthetic fabric.
Diameter: 5/16".
50 feet per box.

Cast bronze construction. Diameter: 1/8" male X 1/8" female.

Bronze construction. Diameter: 3".

Cast bronze construction. Diameter: 3" male X 3" female.

Reliable, rugged diaphragm pump. Portable, lightweight. Stainless steel and aluminum construction. Self-priming. Pumps up to 30 gallons per minute. Vertical handle orientation. Inlet / outlet diameter: 2".

25 micron filter element.

Hand operated drum pump, for fuel oil, includes pump, suction tube, 8 feet discharge hose & bung adapter, approximately 28 ounces per pump cycle.
A double-acting piston pump.
Chemically resistant.
All internal metal parts in contact with the liquid are made of stainless steel.
N-Gasket: Cork/nitrile.
Discharge hose: 8' EPDM with polyester elbow and nozzle.
Suction tube: 2 piece 1" polyester, 34" long with Teflon tape
1" suction, 3/4" discharge.

Replacement O-ring gasket.

Used in retrofits of crank driven pumps. For Volvo, Indmar, and Marine Power engines.

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
Cycles every 2.5 minutes.
Fully automatic, doesn't require float switch.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
1-1/2" discharge outlet.
Model number: 55S.
3700 GPH.

1 micron filter element.

Cast bronze construction. Diameter: 2-1/2".

Cast bronze construction. Diameter: 3".

Cast bronze construction. Diameter: 1/8".

Easily converts a gas grill or other portable LP gas appliance from using small disposable bottles to a larger, refillable cylinder.
Fully assembled and leak tested.
Great for boats, camping, picnics, and more.
Equipped with a hand-wheel POL cylinder fitting on one end, and a high-pressure appliance valve fitting on the other.
Length: 12 feet.

Extra heavy-duty nipple included. 2-1/2" Fpt x 3"

For Jabsco pumps. Three per bag.

Zinc plated malleable iron. Extra heavy-duty nipple included. Weight: 4 lbs

Thru-deck mounting kit for Guzzler hand pumps. May be used with Bosworth pump models: 400, 500, or 2600. Kit includes: - Deck plate and cover - Boot - Stand-off bolts.

Triangular flange base. Features a field-reversible handle. Handle has a square hole to accept a standard ratchet. Stainless steel handle and hardware. 3/4" NPT top.

Cast bronze.

Dimensions: 3/4" X 3/8".