Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 1". Length: 12.5 feet.

Solid brass swivel fittings.
One side is 1" 20 female for a tee connection; other side is 1" 20 male with O-ring and check valve for an appliance connection.
This hose will connect with gas grill adapter tees.
Fully assembled and leak tested.
Length: 6 feet.

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 2-3/8". Length: 12.5 feet.

Dickinson propane connector hose. For use with small and large Sea-B-Que grills. Connects Sea-B-Que grills to standard propane tanks. Eight feet long. Part # 15-189. Weight: 1 lbs.

Dickinson propane connector hose. For use with small or large Sea-B-Que grills Connects Sea-B-Que grills to standard propane tanks. Six feet long. Part # 15-188. Weight: 1 lbs.

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 1-1/2". Length: 12.5 feet.

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 1-1/2". Length: 12.5 feet.

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 1-1/4". Length: 50 feet.

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 1-1/8". Length: 12.5 feet.

Prevents damage to lines due to rubbing and chafing. Color: Blue. 3" filled. 5" flat.

Prevents damage to lines due to rubbing and chafing. Color: Blue. 2" filled. 3.25" flat.

An economical multi-purpose air and water hose.
Rubber construction, with a EPDM liner.
Useful for a wide range of industrial applications.
Works great with washdown systems.
Not petrochemical resistant:
- Not for use with hydraulic oil.
- Not for use with fuel oil.
- Not for use with gasoline.
Diameter: 1".
Color: Red.

High quality multi-purpose rubber hose with EPDM liner Great wash-down hose

For venting bilge gases and fumes.
PVC hose supported by helical wire.
Resistant to ozone, sunlight and weathering.
Will not support a flame.
Diameter: 3".

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 4". Length: 12.5 feet.

Fire-retardant marine fuel hose. Resists alcohol-enhanced gasolines. High nitrile rubber construction. Reinforced with two spirals of synthetic fabric. Diameter: 3/8". 250 feet per spool.

Fire-retardant marine fuel hose. Resists alcohol-enhanced gasolines. High nitrile rubber construction. Reinforced with two spirals of synthetic fabric. Diameter: 3/8". 50 feet per box.

A nitrile multipurpose oil-resistant suction hose.
Designed for marine fuel, venting, wet exhaust and more.
Comparable to Thermoid Bellowsflex.
Reinforced with a dual wire helix.
Rated up to 212° F and 75 psi.
OK for use with gasoline.
Color: Black with yellow stripe.
Approvals: ABYC, ISO, NMMA, SAE, USCG.
Diameter: 2".

300 PSI gauge.
20" QCC pigtail hose included.
Wall mount, single stage.
Meets ABYC standard.

For use in extreme temperature conditions. 
Inner tube is red heat-resistant silicone. 
Reinforced with nylon fiber. 
Cover is heat and weather-resistant silicone. 
ID: 3/8". 
Rated for 80 PSI.

Fire-retardant marine fuel hose. Resists alcohol-enhanced gasolines. High nitrile rubber construction. Reinforced with two spirals of synthetic fabric. Diameter: 3/8". 250 feet per spool.

High quality multi-purpose rubber hose with EPDM liner Great wash-down hose

High quality multi-purpose rubber hose with EPDM liner Great wash-down hose

High quality multi-purpose rubber hose with EPDM liner Great wash-down hose

High quality multi-purpose rubber hose with EPDM liner Great wash-down hose

High quality multi-purpose rubber hose with EPDM liner Great wash-down hose

A nitrile multipurpose oil-resistant suction hose.
Designed for marine fuel, venting, wet exhaust and more.
Comparable to Thermoid Bellowsflex.
Reinforced with a dual wire helix.
Rated up to 212° F and 75 psi.
OK for use with gasoline.
Color: Black with yellow stripe.
Approvals: ABYC, ISO, NMMA, SAE, USCG.
Diameter: 1-1/2".

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 3/4".
Color: Black.
50 feet per box.

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 3/4".
Color: Black.

Fire retardant marine fuel hose. Designed for use with alcohol-enhanced gasoline. Reinforced with 2 spirals of high-strength synthetic fabric. Helical wire imbedded between fabric for kink resistance. Diameter: 2-3/8".

High quality multi-purpose rubber hose with EPDM liner Great wash-down hose

High quality multi-purpose rubber hose with EPDM liner Great wash-down hose

Solid brass high-pressure "T" fitting.
For installation between cylinder valve and regulator or pigtail POL fittings.
Fully assembled and leak-tested.
Swivel male POL to female POl receptacle to 1" 20 male fitting with O-ring and check valve (with captive safety cap).
Designed to be used with a gas conversion hose.
Dimensions: 2" X 4.5" X 2".

Shields 400/402 Vinylvent Vent Hose 3" 3 1/8" 8 Black Venting of bilge gases & fumes. PVC hose supported by helical wire. Resistant to ozone, sunlight and weathering. Will not support a flame.

Multi-purpose agriculture petroleum hose.
For grease, gasoline, kerosene, and other oils.
Diameter: 1".

For use with sinks, showers, drain lines, pumps, AC systems. Resists mild chemicals, heat, cold, ozone, saltwater. Designed for flexibility and heavy-duty suction. Color: Clear blue spiral. Diameter: 3/4".