Keep your decks clean with this high-flow and high-pressure diaphragm pump kit.

A HD model that features a heavy-duty motor and cast aluminum lower housing.
Efficient, quiet and self-priming.
Runs dry without damage.
Quick-connect ports make it easy to install and service.
Kit includes 25 feet of coiled hose and a spray down nozzle.

Sleek, reliable, and compact. Integrated switch. 12 volts. Rated for 800 GPH. Includes straight and 90° Dura-Port connectors. Has a removable nitrile check valve.

Reliable, rugged diaphragm pump. Portable, lightweight. Stainless steel and aluminum construction. Self-priming. Pumps up to 30 gallons per minute. Vertical handle orientation. Inlet / outlet diameter: 2".

Hand operated drum pump, for fuel oil, includes pump, suction tube, 8 feet discharge hose & bung adapter, approximately 28 ounces per pump cycle.
A double-acting piston pump.
Chemically resistant.
All internal metal parts in contact with the liquid are made of stainless steel.
N-Gasket: Cork/nitrile.
Discharge hose: 8' EPDM with polyester elbow and nozzle.
Suction tube: 2 piece 1" polyester, 34" long with Teflon tape
1" suction, 3/4" discharge.

Used in retrofits of crank driven pumps. For Volvo, Indmar, and Marine Power engines.

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
Cycles every 2.5 minutes.
Fully automatic, doesn't require float switch.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
1-1/2" discharge outlet.
Model number: 55S.
3700 GPH.

Use for diesel fuel transfer, liquid transfer jobs, dockside pumping, dewatering or circulation, engine oil changing Fitted with oil resistant elastomers Self-priming, may be mounted above the waterline Heavy-duty ball bearings, thermal overload protection Continuous duty motor provides quiet operation & smooth flow Runs dry without harm to pump Includes plug-in ports for easy installation, two garden hose ports and two 3/4" hose barb ports Includes a 3/4" inlet strainer Weight: 6 lbs

Self-priming pump with run-dry protection. Triple-sealed motor to prevent corrosion. Four-bladed chopper reduces clogging. Flow rate: 12 GPM. Self primes up to 4 feet of vertical lift. Ports: 1-1/2" and 1". 24 volts DC, 8 amp draw.

Designed to handle large fluid extraction applications. Ideal for removing stagnent bilge fluids. Dual-action pump works on both upstroke and downstroke. Equipped with an automatic shut-off valve to stop overflow. Tethered cap, easy-pour spout prevents messes. Capacity: 7 liters.

All plastic. Self lubricating, self-priming and very easy to clean. Will not rust or corrode. Will not mar boat. Length: 18". Diameter: 1-1/4". Strokes/Gal: 10.

Bronze construction. Nitrile impeller. Lip seal, stainless steel shaft. 1/2" ports, horizontal orientation.

Designed to remove water from basements, garages, stairwells, utility rooms, back yards, sumps, pools, pool covers, boats and more.
Fully-automatic version uses standard 110 volt AC current
24' cord.
1800 GPH.

Rated for 1000 GPH. For showers, dishwashers, galley sinks, and more. Automatic action for draining from sump tank. Has a tight-fitting lid to prevent spashes and odors. Dimensions: 11.42" X 8.26" X 5.7".

Dash alarm for Rule bilge pump.
12 volts.
Does not include bilge pump switch. 

Heavy-duty, magnetic-driven, enclosed pump. Permanent magnet, ball-bearing mounted motor. Designed for continuous use. 5/8" or 3/4" hose. Dimensions: 6.97" X 2.68" X 3.35".

Non-automatic.
Rated for 900 gallons per minute.
Designed to bring pumping power to tight spaces.
Equipped with a backflow prevention valve.
For horizontal or vertical mounting.
12 volt DC.

Automatic.
Rated for 900 gallons per minute.
Designed to bring pumping power to tight spaces.
Equipped with a backflow prevention valve.
For horizontal or vertical mounting.
12 volt DC.

Included check valve prevents backflow.
Threaded discharge for easy installation and maintenance.
Connectors: 3/4" and 1".
Rated for 800 GPH.
May be operated by a separate panel switch or a float switch.
12 volt DC.

Nitrile impeller.
115 vac.
Rated for 6 gallons a minute.
Easy to service and maintain.
Tolerates fairly abrasive wear.

Pump with neoprene impeller Bronze body - Stainless steel shaft Stainless steel lip or mechanical seals for shaft Shielded ball bearings - 1" IPT Weight: 6.2 lbs

Automatic bilge pump.
1-1/8" discharge outlet.
Senses when bilge water reaches 2-3/4".
12 volt DC.
Rated for 1100 GPH.

Bronze body. 1-1/2" ports. Rated for 73 gallons per minute. 1" shaft.

Original Johnson Pump Style Pump 62 GPM F8B8 Bronze body, stainless steel shaft, 1-1/4" ports, 1"shaft keyd. Mounted shaft with perm. Lubricated double ball bearings. Mechanical seal, neoprene impeller.

A compact multi-purpose hand pump kit. Great for many draining and liquid transfer jobs. Small enough to fit in a tool or tackle box. Includes: - Pump - 2" hose - Draw tube for draining crankcases.

Designed for the tough demands of the fishing industry. Equipped with a liquid-cooled 12-pole motor. Features a mechanical shaft seal and a threaded port. Uses 1-1/8" and 1-1/4" ports. Rated for 2200 GPH.

Sliding Vane Diesel Pump VR050 Diesel Refueling 24V 1" 1" Hose 5-1/4" 5" 8-1/2" 11 Lbs. Continuously rated diesel pump - 13.7 GPM at 10 ft. total head. Self priming up to 9.6 ft. vertical lift. Optional fitted switch, fuse & ports. 22° F to 104° F operating temp range.

Nylon pump body. Nitrile valves and diaphragm. Rated for 3.5 gallons per minute. 1/2" port, 3/4" hose output. 12 volt DC.

An optimized impeller gives great flow at low amperage. 
A built-in thermal cut-off protects pump and vessel. 
Backflow preventer helps keep bilges dryer and cleaner. 
3/4" discharge outlet. 
Includes both straight and 90° port attachments. 
12 volts DC. 
Model number: 24DA. 
360 GPH.

Nylon pump body. Automatically starts when pressure drops to 50 psi. Rated for 5.2 gallons per minute. 1/2" port, 3/4" hose output. 12 volt DC.

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
1-1/8" discharge outlet.
Model number: 02.
1500 GPH.

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
1-1/8" discharge outlet.
Model number: 04.
1500 GPH.
Includes a five-year warranty from Xylem.

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
1-1/8" discharge outlet.
Model number: 09.
2000 GPH.
Includes a five-year warranty from Xylem.

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
24 volts DC.
1-1/8" discharge outlet.
Model number: 12.
2000 GPH.

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
1-1/8" discharge outlet.
Model number: 10.
2000 GPH.