Rated for 13 gallons per minute. Self-priming from up to 7.8 feet. 1" hose barb ports. 12 volts.

Reliable, rugged diaphragm pump. Portable, lightweight. All Delrin plastic construction. Self-priming. 12 foot delivery suction lift. Vertical handle orientation. Inlet / outlet diameter: 1".

Ideal for transferring diesel fuel. Self-priming to about 3 feet. Can pump against a discharge head up to 20 feet. Ideal for moving fuel between port and starboard fuel tanks. 12V DC.

Pacer self-priming centrifugal electric water pump.
Lightweight, chemically-resistant for general service.
Can handle water, saltwater, waste water, mild acids and bases.
Diameter: 2".
Rated for 110 gallons per minute (GPM) maximum flow.
Glass reinforced polyester with lined volute.
Stainless steel internal parts.

Has some of the most advanced features in the industry. Removable motor cartridge for cleaning and replacement. Rated for 750 GPM. Equipped with easy-to-install Dura-Port discharge ports. 3/4" fitting. Dimensions: 2.75" X 4.4".

Nylon pump body.
Rated for 5.2 gallons per minute.
Activates at 25 PSI, cuts out at 40 psi.
Quiet operation, smooth flow.
Compact design.
3/8" port, 1/2" hose output.
12 volt DC.

Place pump end in low point of bilge and powerful self-priming action gives full suction on first stroke. Quick, easy pump out of bilges and other flooded areas Compact, easy to stow, only 17" (430mm) long Includes 5 ft. length of 1/2" discharge hose Weight: 1.7 lb

Designed for automatic operation with an Ultima switch. Rated for 1250 GPH. Equipped with easy-to-install Dura-Port discharge ports. 1-1/8" fitting.

Provides pumping power at the push of a button. Has a connection for a vacuum switch accessory. Bronze construction. Mechanical seal, stainless steel shaft. 1-1/2" ports.

A lighter, compact pump for smaller vessels.
Tough plastic body with integral strainer.
Quick-release inlet strainer allows for quick cleaning.

12 volt DC.
3/4" hose connections.
Output: up to 23 liters per minute.

Includes a Rule 35A non-mercury float switch.

A compact, general-purpose pump. Bronze body. Nitrile impeller. 3/8" ports. Rated for 3.4 gallons per minute at 10 feet. Stainless steel shaft. 6 foot cord, with AC plug.

Electromagnetic clutch pumps equipped with a powerful electric clutch for convenient remote operation 12 volt pump Capable of operating through a wide range of speeds and in either rotational direction. Dimensions: 2A Pulley Belt Grooves - 2" NIPT - 83 GPM Weight: 30.5 lbs

Jabsco general-purpose pump. Used for cooling, wash down, circulation and more. Pedestal-mount, corrosion-resistant bronze construction. Self-priming and portable: very versatile. Removable end cover allows easy impeller servicing. 1" shaft, 1-1/4" NIPT port, rated for 62 GPM. Weight: 10.19 lbs.

Provides ultimate pumping performance and fully automatic operation.
Designed to help keep your boat clear of nuisance water.
Equipped with a powerful 800 GPH high-capacity pump.
Tough impact-resistant sealed polycarbonate lid.
3/4" discharge port.
Simple to install.

A multi-purpose hand pump kit. Brass and neoprene construction. Corrosion resistant. Great for draining or filling engine and gearbox oil. Rated for up to 1-1/2 GPM output. Includes: - Pump - Two 1/2" hoses, 3 feet length - Two dipstick probes, 1/4" and 5/16" - Connector and adapter for 1/2" hose. Not designed for pumping flammable liquids.

Includes: - 3 feet of 1/2" hose - Probe adaptor - 1/4" X 40" dipstick probe - Utility pump. Kit has same utility pump as 17250-0003. Packed in poly bag with display header card.

FC Tournament Series pump.
For seacock applications.
3/4" intake.
3/4" discharge hose.
Flow rate: 800 GPH.
12 volts.

Bronze impeller pump. Can handle small bilge debris. Flow rate: 8 GPM. 12 volts.

Rated for 5 gallons per minute. 70 PSI maximum pressure. Includes: - Pump - 25 feet of coiled hose - Pump protector inlet strainer - Spray nozzle - Two-way panel switch with fuse.

Dockside general purpose pumping and some onboard uses.
Self-priming and portable, very versatile.
Removable end cover allows easy impeller service.
Pump heads are built of bronze materials.

Electromagnetic clutch pumps equipped with a powerful electric clutch for convenient remote operation 12 volt model Capable of operating through a wide range of speeds and in either rotational direction 2A Pulley Belt Grooves - 1" NIPT - 26 GPM Weight: 15.25 lbs

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
Cycles every 2.5 minutes.
Fully automatic, doesn't require float switch.
High efficiency, low amp motor
Quick-release strainer allows for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
Model number: 53S.
2000 GPH.

High-capacity bilge pump, designed for the toughest applications.
An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
2" discharge outlet.
Model number: 56D.
Rated for 4000 GPH.

Automatic bilge pump: with a built-in sensor, the pump will activate when water is present and stop after it's pumped out.
Fully submersible.
May be connected to a three-way switch for a manual override option.
3/4" discharge outlet. 
12 volt DC. 
Rated for 800 GPH. 

Pacer's S Series self-priming centrifugal pump.
Lightweight and chemically resistant for general service.
Suitable for water, salt water, waste water, and mild acids and bases.
Constructed from polyester.
Stainless steel or non-metallic fasteners for resistance to chemical attack.
Suction lift to 25 ft. (7.6m) vertical.
- Requires 9.5 GPM for maximum pumping capacity
- HP required is 5.0
- Up to 230 GPM
- Buna-N elastomers
- Port size : 2" FNPT.
Pedestal mount.

Rated for 14 gallons per minute. Cast bronze cutter plate macerator. Reduces particle size to 1/8". Nitrile impeller with stainless steel wearplates. Inlet: 1-1/2". Outlet: 1".

Pacer's S Series self-priming centrifugal pump.
Lightweight and chemically resistant for general service.
Suitable for water, salt water, waste water, and mild acids and bases.
Constructed from polyester.
Stainless steel or non-metallic fasteners for resistance to chemical attack.
This model is equipped with a hydraulic motor.
Suction lift to 25 ft. (7.6m) vertical.
- Requires 9.5 GPM for maximum pumping capacity
- HP required is 5.0
- Up to 230 GPM
- Buna-N elastomers
- Port size : 3" FNPT.

Designed for the tough demands of the fishing industry. Equipped with a liquid-cooled 12-pole motor. Features a mechanical shaft seal and a threaded port. Uses 1-1/2" and 2" ports. Rated for 4000 GPH.

Stainless steel housing and polyester internal parts. Dual 1-1/2" female and 2" male suction and discharge ports. Rated for 3450 RPM.

Electromagnetic clutch pumps equipped with a powerful electric clutch for convenient remote operation 12 volt model Capable of operating through a wide range of speeds and in either rotational direction 2A Pulley Belt Grooves - 1-1/4" NIPT - 62 GPM Weight: 21.65 lbs

Can deliver almost 7 GPM at open flow.
Equipped with pressure-cast bronze body.
Features a reusable O-ring type end cover seal.
1/2" internal pipe thread and 1" external hose barb.
Includes 2 port adapter.

Electromagnetic clutch pumps equipped with a powerful electric clutch for convenient remote operation 12 volt model Capable of operating through a wide range of speeds and in either rotational direction 1b Pulley Belt Grooves - 1-1/4" NIPT - 62 GPM Weight: 22.8 lbs

Long life circulation, high efficiency and flow Use for hot and cold water systems, live well and bait tank systems, liquid transfer also windscreen washing 3/4 " NPT or BPS Dimensions: 6" L x 6-1/2" W x 5" H Weight: 4 lbs

Provides high pumping capacity and reliability.
All-in-one pump and intelligent switch.
Designed to activate at 2-1/2" deep water.
Circuit will automatically cycle when needed.
1-1/8" discharge outlet.
12 volts DC.

Chrome plated brass faucet. Includes compression fitting hardware. Integrated 35 psi shutoff pressure switch. Low power consumption (2.5 amps at 12 volt). Quiet operation and self priming.