Forespar MF 850 ball valve. Molded from high-strength Marelon. Strong, lightweight, and non-corrosive. Controls inlet/outlet needs both above and below waterlines. Body size: 3" X 1-7/8". Threads: 3/4" NPT. Weight: .35 lb.

Forespar MF 850 ball valve. Molded from high-strength Marelon. Strong, lightweight, and non-corrosive. Controls inlet/outlet needs both above and below waterlines. Body size: 4-1/4" X 5-7/8". Threads: 2" NPT. Weight: 2 lb.

Forespar MF 850 ball valve. Molded from high-strength Marelon. Strong, lightweight, and non-corrosive. Controls inlet/outlet needs both above and below waterlines. Body size: 3-1/2" X 5". Threads: 1-1/2" NPT. Weight: 1.35 lb.

Forespar MF 850 ball valve. Molded from high-strength Marelon. Strong, lightweight, and non-corrosive. Controls inlet/outlet needs both above and below waterlines. Body size: 2-3/4" X 4-7/8". Threads: 1-1/4" NPT. Weight: 1 lb.

Slip ball connection. Slip ends. Rated for 150 PSI. Diameter: 2".

Slip ball connection. Threaded ends. Rated for 150 PSI. Diameter: 1-1/2".

Slip ball connection. Threaded ends. Rated for 150 PSI. Diameter: 2".

Slip ball connection. Threaded ends. Rated for 150 PSI. Diameter: 1".

Slip ball connection. Threaded ends. Rated for 150 PSI. Diameter: 1-1/4".

Brass construction. Meets ABYC H-24 requirements. Provides anti-syphon protection. Size: 1/4".

Female 3-way valve bottom outlet. Allows the connection of two permanent tanks to one motor. Will only draw from one tank at a time. Brass construction. Size: 3/8". Weight: .3 lb.

Bronze body with a stainless steel spring. Diameter: 1/2".

Bronze body with a stainless steel spring. Diameter: 3/4".

Brass body, large port, blow-out proof stem, screwed ends Service in steam, water, oil and gas 2 piece screwed type brass body Viton double O-ring stem packing Zinc-plated hardened, plastic-covered lever handle remains cool in high temperature installation Hard chromium plated brass ball Federal specs: WW-V-35, Type 11, Class A, Style 3 Weight: 16 lbs

Female 3-way valve bottom outlet. Allows the connection of two permanent tanks to one motor. Will only draw from one tank at a time. Brass construction. Size: 1/4". Connectors on three sides. Handle "clicks" into position.

Bronze construction.
Full flow drain and grounding screw.
Hard chrome bronze ball.
Vinyl-coated stainless steel handle.
Pipe: 1-1/2".
 
---
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Do not use in connection with drinking water. Wash hands after handling.

Female to male shut-off valve. Brass construction. Size: 1/4".

Creates and maintains pump prime. Doubles pump lift for Guzzler "400" Series pumps. Prevents fluid backflow. Flapper valves are standard. Durable, lightweight Delrin plastic. For 1-1/2" hose.

High-quality aluminum construction. Provides anti-siphon protection on all gasoline-powered boat 1/4" male NPT to 1/4" hose barb.

Brass body, large port, blow-out proof stem, and screwed ends. Service in steam, water, oil and gas. 2 piece screwed type brass body. Viton double O-ring stem packing. Zinc-plated hardened, plastic-covered lever handle remains cool in high temperature installation. Hard chromium plated brass ball. Federal specs: WW-V-35, Type 11, Class A, Style 3 Weight: 4.5 lbs

Cast bronze.

Brass body, large port, blow-out proof stem, screwed ends Service in steam, water, oil and gas 2 piece screwed type brass body Viton double O-ring stem packing Zinc-plated hardened, plastic-covered lever handle remains cool in high temperature installation Hard chromium plated brass ball Federal specs: WW-V-35, Type 11, Class A, Style 3 Weight: 3.38 lbs

Brass body, large port, blow-out proof stem, screwed ends Service in steam, water, oil and gas 2 piece screwed type brass body Viton double O-ring stem packing Zinc-plated hardened, plastic-covered lever handle remains cool in high temperature installation Hard chromium plated brass ball Federal specs: WW-V-35, Type 11, Class A, Style 3 Weight: 2.08 lbs

Brass body, large port, blow-out proof stem, screwed ends Service in steam, water, oil and gas 2 piece screwed type brass body Viton double O-ring stem packing Zinc-plated hardened, plastic-covered lever handle remains cool in high temperature installation Hard chromium plated brass ball Federal specs: WW-V-35, Type 11, Class A, Style 3 Weight: 1.42 lb

For Perko raw water strainers. Includes 1/2" and 3/4" gaskets. For #4 and #5 strainers.

Includes: - One cover gasket - Two cork cylinder gaskets. For use with #4 and #5 water strainers.

Cover bolt, wing-nut and washer. For use with 493 series water intake strainers. Fits models 4 and 5 only. Bolt length is 1-7/8".

Stainless steel. Replacement basket for intake strainer. Diameter: 2".

Equipped with a drain plug. For use with Groco ARG-500 raw water strainer.

Consists of: Cover gasket Cork cylinder gaskets

Scoop strainer. Cast in bronze. Dimensions: 9" X 13".

Clear plastic housing for quick inspection. Keeps debris and particles from clogging pump. Diameter: 3/4".

Stainless steel. Replacement basket for intake strainer. Diameter: 3/4".

High-capacity, low-profile inline strainer unit. Uses 3/4" ID hose. Transparent housing for easy inspection and cleaning. Fits directly into a diaphragm pump inlet port.