A unique two part epoxy primer coating.
Helps to prevent and repair gelcoat blistering.
Protects fiberglass hulls from water absorption.
Gives excellent barrier coat protection.
Contains "micro-plates" for extra protection.
Works as an anti-corrosive substrate primer for metals.
Dries quickly, with a short re-coat time.
Color: White.
Size: 1 gallon kit.

A unique two part epoxy primer coating.
Helps to prevent and repair gelcoat blistering.
Protects fiberglass hulls from water absorption.
Gives excellent barrier coat protection.
Contains "micro-plates" for extra protection.
Works as an anti-corrosive substrate primer for metals.
Dries quickly, with a short re-coat time.
Color: White.
Size: 1 quart kit.

Single-component low VOC universal primer.
May be used on both ferrous and galvanized metal.
Fast-drying properties.
Excellent corrosion resistance.
May be top coated.
Lead and chromate free
High volume of solids.

Converts rust into a barrier layer of magnetite. A bonding agent for epoxy, acrylic, and oil-based finishes. Gives exceptional bonding with moisture cured polyurethanes. May be used as a rust converter, or paint / etch primer. Eliminates the need to mechanically blast to white metal. Not for use with zinc chromates or zinc phosphates. Size: 1 qt. Coverage: Approximately 50 square feet, at 10 mil.

ePaint Multi-Purpose epoxy primer.
A robust, easy-to-use two part primer.
Perfect as a base coat for ePaint antifouling paint.
Provides water migration and corrosion protection.
Compatible with bottom paints, easy to apply.
Size: 1 gal.
Color: Red.

Adheres to ferrous metals: steel, cast iron, galvanized and stainless.
Protects against corrosion.
Wets, seals, and adheres to firmly attached rust.
Dries rapidly, allows multiple coats in 1 day.

Adheres to ferrous metals: steel, cast iron, galvanized and stainless.
Protects against corrosion.
Wets, seals, and adheres to firmly attached rust.
Dries rapidly, allows multiple coats in 1 day.

A heavy-duty two-part coating.
May be used on practically any part of a boat.
Excellent for protecting underwater metal from corrosion.
Forms a tight, durable chemical-resistant film.
56% solids by volume.
Size: 1 quart kit

A heavy-duty two-part coating.
May be used on practically any part of a boat.
Excellent for protecting underwater metal from corrosion.
Forms a tight, durable chemical-resistant film.
56% solids by volume.
Size: 1 gallon kit

Inhibits corrosion: use only on bare metals!
For use above or below waterline.
Dried film is 93% zinc.
Do not apply anti-fouling paint over zinc coat.

A versatile, highly penetrating air drying oil.
Can be used alone or added to paint.
Used alone it provides a tough, flexible finish.
Drives out excess moisture and air to stop rust.
Fills dry porous wood to stop paint peeling.
When added to any oil or alkyd based coatings, it gives increased wet edge time and improved flowing and adhesion.
Size: 1 liter.

ePaint Multi-Purpose epoxy primer.
A robust, easy-to-use two part primer.
Perfect as a base coat for ePaint antifouling paint.
Provides water migration and corrosion protection.
Compatible with bottom paints, easy to apply.
Size: 1 gal.
Color: White.

2 component epoxy-polyamide coating for use on sandblasted aluminum where maximum resistance to fresh or salt water is required
Smooth finish provides an excellent bonding surface for additional primers or topcoats
Excellent water, chemical and corrosion resistance for aluminum.
High performance Strontium chromate primer for all aluminum.
Size: 2 gallon kit.

General purpose tie coat primer.
Use above or below waterline.
Compatible with anti-fouling bottom paints.
Compatible with all types of single component topside finishes.

General purpose tie coat primer.
Use above or below waterline.
Compatible with anti-fouling bottom paints and all types of single component topside finishes.

Amercoat 302 reinforced inorganic zinc primer.
Zinc-rich primer used for protecting steel.
Used on tanks, equipment, piping, ships, barges,
Easily applied, low VOC, fast-dry.
Mixing ratio, by volume: 1 part cure to 9 parts resin.
Provides outstanding corrosion resistance.
Pre-mixed with zinc dust.

Amercoat 302 reinforced inorganic zinc-rich primer used for protecting steel.
Used on tanks, equipment, piping, ships, barges, and more.
Easily applied, low VOC, fast-dry.
Pre-mixed with zinc dust.
Converter, used with 1 gallon of resin.

Amercoat 302 reinforced inorganic zinc primer. Zinc-rich primer used for protecting steel. Used on tanks, equipment, piping, ships, barges, Easily applied, low VOC, fast-dry. Pre-mixed with zinc dust. Converter, used with 5 gallons of resin. Weight: 2.3 lbs.

Converts rust into a barrier layer of magnetite. A bonding agent for epoxy, acrylic, and oil-based finishes. Gives exceptional bonding with moisture cured polyurethanes. May be used as a rust converter, or paint / etch primer. Eliminates the need to mechanically blast to white metal. Not for use with zinc chromates or zinc phosphates. Size: 1 gal. Coverage: Approximately 200 square feet, at 10 mil.

Converts rust into a barrier layer of magnetite. A bonding agent for epoxy, acrylic, and oil-based finishes. Gives exceptional bonding with moisture cured polyurethanes. May be used as a rust converter, or paint / etch primer. Eliminates the need to mechanically blast to white metal. Not for use with zinc chromates or zinc phosphates. Size: 5 gal. Coverage: Approximately 1000 square feet, at 10 mil.

Provides excellent protection for bare metals by inhibiting corrosion.
Useful on aluminum, steel, iron, copper, bronze, lead, and more.
Forms a strong bond with underwater metals and running gear.
Dries to a smooth layer of zinc film, which will self-clean.
May be used above or below the waterline.
Size: 1 quart.
Color: Gray.

A two-part water-based epoxy primer / sealer.

May be used on concrete, masonry, fiberglass, wood and previously painted substrates.
This primer is recommended for your projects with Tuff Coat for proper adhesion.
Simple 1:1 mix.

1 gallon kit.

Amercoat 302 reinforced inorganic zinc primer. Zinc-rich primer used for protecting steel. Used on tanks, equipment, piping, ships, barges, Easily applied, low VOC, fast-dry. Provides outstanding corrosion resistance. Pre-mixed with zinc dust Mixing ratio, by volume: 1 part cure to 9 parts resin.

A multi-purpose two-part epoxy primer.
Suitable for use under all Interlux topside finishes
It can be used to resurface cracked and crazed gelcoat, and over clear epoxies to eliminate the effects of amine blush.
Size: 1 qt.

An "All-in-One" primer.
Single-part multipurpose primer for above the waterline.
Combines the features of separate substrate primers in one.
Adheres well to wood, fiberglass, metals: bare or painted surfaces.
Excellent covering capability, high build, good grain filling.
Provides corrosion protection on steel.
Color: Gray.
Size: 3/4 liter.

Inter-Prime wood sealant. Suitable for either interior or exterior use. Stops varnish from soaking into the wood and seals grain. Helps varnish or paint to dry without "high" and "low" spots Recommended for sealing plywood to resist cracking.

2 component epoxy-polyamide coating for use on sandblasted aluminum where maximum resistance to fresh or salt water is required
Smooth finish provides an excellent bonding surface for additional primers or topcoats
Excellent water, chemical and corrosion resistance for aluminum.
High performance Strontium chromate primer for all aluminum.
Size: .75 gallon kit.

White undercoated smoothes out any surface.
Base coat for aged, cracked, pitted surfaces
For fiberglass, wood, previously painted surfaces.
Dries quickly - easy to sand.
Use Pettit 120 brushing thinner.

White Easypoxy undercoater.
Smoothes out any surface.
A base coat for aged, cracked, pitted surfaces.
Use it on fiberglass, wood, previously painted surfaces.
Dries quickly and is easy to sand.
Mixes with Pettit 120 brushing thinner.
Size: 1 gallon.

The original polyester glazing putty.
 
Can be applied directly to bare metal, body filler, fiberglass and fully cured sanded top coats.
Easily fills grind marks, pinholes, low spots and other minor imperfections.

Contains ZNX-7 for superior adhesion to galvanized steel, bare steel, aluminum, SMC, E-Coat and OEM finishes.

No shrinkage.
Easy dry.
Reduces risk of staining.

Blue cream hardener included.

20 oz.

Quick hardening, non-separating, cream hardener.
Formulated for use with body fillers, specialty fillers and polyester finishing putties.
Color: White.
Size: 4 oz.

A lightweight, fast-curing, two-part epoxy putty.
For filling and smoothing surface imperfections.
Safe for use above and below the waterline.
An integral part of Pettit's gelcoat blister repair system.
Also used for leveling metal keels or other underwater areas.
Excellent chemical and water resistance.
Non-sagging, non-shrinking and easy to apply.
Color: Off-white.
Size: 1.5 quarts.

A lightweight, fast-curing, two-part epoxy putty.
For filling and smoothing surface imperfections.
Safe for use above and below the waterline.
An integral part of Pettit's gelcoat blister repair system.
Also used for leveling metal keels or other underwater areas.
Excellent chemical and water resistance.
Non-sagging, non-shrinking and easy to apply.
Color: Off-white.
Size: 8.5 ounces.

Paintable, non-toxic sealant that is pliable and soft. It can be used on oddly shaped gaps and holes. Does not damage or corrode plastic or metal. 1 lb. block.