Used to file slots, keyways, or surfaces. Double cut. Tapered slightly toward point. Length: 6".

GearWrench combination ratcheting wrench set. Standard, with Flex-heads. Tilts up to 180 degrees 7 pieces. sizes: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4". Weight: 1.5 lbs.

For #29 hooks. Includes: - Spring spacer - Bolt and nut - Latch.

Features a large knurl for a tight jaw fit.
Wide handle helps reduce fatigue and improve comfort.
Chrome-plated finish wipes clean and resists rust and corrosion.
Full jaw capacity: 1-1/8".
Length: 8".

Galvanized steel pin and bolt.
Bail size: 3/8".
Working load limit: 2000 lb.

High visibility orange, high impact case. Easy-to-read yellow blade. Open, four-arm frame design protects blade. Blade width: 1/2". Length: 100'.

Diagonal solid joint cutters. Ideal for close trimming on injection molded plastic parts. Flush ground, oval shaped jaws with fine point. Designed for use in confined areas. Handle coil springs reduce user fatigue. Polished head. Length: 5". Weight: .3 lb.

Galvanized steel. Size: 3/8". Working load limit: 5400 lb.

General purpose chain. Standard commercial quality chain. Low-carbon steel. Galvanized and proof tested. 150 feet per drum. Diameter: 3/4". Working load limit: 6900 lbs. Weight: 5.36 lbs. per foot.

Double-ended snap. Die cast zinc, nickel plated. Size: 4-5/8" Weight: .1 lb

High visibility orange, high impact case. Easy-to-read yellow blade. Top-positioned toggle lock. Cushioned blade return. Blade width: 1/2". Length: 12'.

Galvanized steel. Forged pins join two halves of a link together. Interlocking lugs distribute the weight load. Size: 3/4". Working load limit: 10,250 lb.

Mooring chain.
Low-carbon steel with a long-link design.
Galvanized and proof tested.
200 feet per drum.
Diameter: 1/2".
Working load limit: 6000 lbs.

High alloy steel. Radial corners will engage the flats on fasteners. Designed to stay secure to the drive tool. For 3/8" drivers. Size: 1/4".

High alloy steel. Radial corners will engage the flats on fasteners. Designed to stay secure to the drive tool. For 3/8" drivers. Size: 1".

High alloy steel. Radial corners will engage the flats on fasteners. Designed to stay secure to the drive tool. For 3/8" drivers. Size: 11/16".

High alloy steel. Radial corners will engage the flats on fasteners. Designed to stay secure to the drive tool. For 3/8" drivers. Size: 5/8".

High alloy steel. Radial corners will engage the flats on fasteners. Designed to stay secure to the drive tool. For 3/8" drivers. Size: 13/16".

High alloy steel. Radial corners will engage the flats on fasteners. Designed to stay secure to the drive tool. For 3/8" drivers. Size: 7/8".

Mechanic's tool set, metric.
An assortment of hand tools for many applications.
Alloy steel, chrome plated.
Includes:
- Bit driver
- Wrenches
- Sockets
- Ratchets and extenders
- Hex keys.

Double-ended snap. Die cast zinc, nickel plated. Size: 3/4". Weight: .1 lb

H.K. Porter wire cutters. General purpose cutter / clipper. Steel jaws. Length: 8-1/2" Weight: .5 lb.

Mooring chain. Low-carbon steel with a long-link design. Galvanized and proof tested. 150 feet per drum. Diameter: 5/8". Working load limit: 9000 lbs. Weight: 3.4 lbs. per foot.

High strength carbon steel chain. Galvanized and proof tested. Good for towing, dragging, logging. 400 feet per drum. Diameter: 3/8". Working load limit: 5400 lbs. Weight: 1.35 lbs per foot.

Compound leverage design increases cutting power by 50%. Chrome vanadium steel for increased durability. Co-molded grips for added comfort and superior control. Induction hardened edges for long cutting life. Lighter than standard pliers for reduced hand fatigue. Size: 9" X 1" Weight: .5 lbs.

Galvanized steel hook with safety latch. Molded nylon shell. Single sheave. Brass bushings. Working load limit: 1000 lb. Fits 5/8" rope. Size: 6".

Galvanized steel. Has two hex nuts. For wire rope size: 9/16".

High alloy steel. Radial corners will engage the flats on fasteners. Designed to stay secure to the drive tool. For 1/2" drivers. Size: 11/16". Length: 2-1/2".

High alloy steel. Radial corners will engage the flats on fasteners. Designed to stay secure to the drive tool. For 1/2" drivers. Size: 5/8". Length: 2-1/2".