For gelcoats and other air-inhibited polyesters. A light mist sprayed on gelcoat will cure resin. Eliminates that tacky feel. Size: 8 oz.

A non-running, non-sagging flexible polyester.
Used to permanently repair and construct gelcoat.
Product cures to a hard finish.
Does not require mold release to fully cure.
Use it to fill gouges, chips, scrapes and other minor damage to fiberglass.
Coloring agents may be used to tint the material.
Color: White.
Size: 1 pint.

The quality ISO NPG marine laminating gel coat to permanently repair or replace original, high-glass finish The product cures to a tacky finish for re-coating Evercoat Mold Release (# 105685) must be used to attain a fully cured surface Use to fill gouges, chips, scrapes and deep scratches in the fiberglass gel coat Gel Kote is a non-run, non-sag formulation of flexible polyester resins to produce resiliency and toughness Evercoat Coloring Agents may be used to tint the material to desired color. Reduce with Evercoat Acetone (10%) to thin for sprayer applications. Weight: 10 lbs

The quality ISO NPG marine laminating gel coat to permanently repair or replace original, high-glass finish The product cures to a tacky finish for re-coating Evercoat Mold Release (# 105685) must be used to attain a fully cured surface Use to fill gouges, chips, scrapes and deep scratches in the fiberglass gel coat Gel-Kote is a non-run, non-sag formulation of flexible polyester resins to produce resiliency and toughness Evercoat Coloring Agents may be used to tint the material to desired color. Reduce with Evercoat Acetone (10%) to thin for sprayer applications. Weight: 2.67 lbs

Best known for its bridging capabilities in rebuilding shattered fiberglass and for reinforcing torn or rusted areas of sheet metal.
Formulated with long strands of chopped fiberglass.
Double the strength of standard fillers.
Waterproof and rustproof.
Can be used with or without fiberglass cloth or mat.
Should be finished with Rage and / or Metal Glaze.
Blue cream hardener included.

Aluminum body repair filler For metal surfaces. Has excellent corrosion resistance properties. Adheres well to galvanized steel and aluminum. Will not sag: known as "the nearest thing to lead". Moisture proof. Easily sands to a fine feather edge. Metal-2-Metal liquid reactor included. Size: 1 qt.

Woven fiberglass material.
High strength, flat weave cloth.
Used with polyester or epoxy resin.
For repairing holes, or used as a reinforcing material.
May be used over fiberglass, metal or wood.
Has excellent drapability and wet-out properties.
Package size: 44" X 36" (1 yard).

Both edges are sewn to eliminate raveling.
Great for large construction jobs.
4" wide.
150 foot roll.
Sold by the roll or by the foot.

Woven fiberglass material.
High strength, flat weave cloth.
Used with polyester or epoxy resin.
For repairing holes, or used as a reinforcing material.
May be used over fiberglass, metal or wood.
Has excellent drapability and wet-out properties.
Package size: 38" X 108" (3 yards).

Woven fiberglass material.
High strength, flat weave cloth.
Used with polyester or epoxy resin.
For repairing holes, or used as a reinforcing material.
May be used over fiberglass, metal or wood.
Has excellent drapability and wet-out properties.
Package size: 38" X 36" (1 yards).

High strength, flat weave fiberglass cloth.
Faster buildup and extra strength.
Used in addition to mat and cloth
Adds strength needed with minimum lay-up time.
Designed for covering large surfaces.
Has excellent drapability and wet-out properties.
Package size: 50" X 36" (1 yard).

100% fiberglass in a non-woven state
For bulk "build-up" repairs.
Use it on holes and badly damaged areas.
38" X 102" (three square yards).

100% fiberglass in a non-woven state
For bulk "build-up" repairs.
Use it on holes and badly damaged areas.
One square yard.