For bulkhead mounting of SeaStar DC tee handle control.

Shaft seal kit for Baystar 6.1 helm pumps.
Three screws, shaft seal and O-ring.

Cable clevis, pin, & cotter pin for 60 series control cable.
Pin diameter: 7/16".
Plated steel. 

Complete cylinder and piston replacement assembly.
For CL-B4 and CL-T4 Hynautic control heads.

Clear PVC with a black vinyl helix. Abrasion, saltwater, and chemical resistant, flexible. Often used for: - Bilge pump discharge - Potable water tanks fills - Drains for sinks, showers, livewells, or scuppers. This hose uses 147 right hand thread cuffs. Do not attach to thru hull fitting below the water line. Not for use with glycol-based antifreeze. Diameter: 1-1/4".  NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Spent travel tube for SAFE-T "QC", SAFE-T "TS",
and BIG-T rotary helms.

Complete steering system includes NFB helm, high efficiency
XTREME steering cable design and new style bezel.
XTREME NFB single-cable systems are suitable for most
single station boats with a single non-power-assisted
outboard engine up to V-6 and minimal engine flutter or
steering instability.
Smoothest and lowest steering effort mechanical helm
offered in the market place yet still offers easy installation.
The kit contains the following:
- SHX7606 XTREME NFB Helm, Bezel, and Hardware Kit
- SSCX64 17' XTREME QC Steering Cable

Complete steering system includes NFB helm, high efficiency
XTREME steering cable design and new style bezel.
XTREME NFB single-cable systems are suitable for most
single station boats with a single non-power-assisted
outboard engine up to V-6 and minimal engine flutter or
steering instability.
Smoothest and lowest steering effort mechanical helm
offered in the market place yet still offers easy installation.
The kit contains the following:
- SHX7606 XTREME NFB Helm, Bezel, and Hardware Kit
- SSCX64 19' XTREME QC Steering Cable

40 series.
Stud diameter: 1/4".
Lever thickness: 1/4".
Length: 15/16"

Economical workhorse cable Corrosion protected seals/UV stabilized outer jacket Brass sleeve, stainless steel rod 3" Travel - 10-32 SAE Threads - 8" Minimum bend radius Cable adapter kits available for: Mercury - MerCruiser - Johnson/Evinrude Weight: 1.2 lb

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 6'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 9'.

Fire-retardant marine fuel hose.
Resists alcohol-enhanced gasoline.
High nitrile rubber construction.
Reinforced with two spirals of synthetic fabric.
Diameter: 5/16".
50 feet per box.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 30'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 27'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 22'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 17'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 11'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 19'.

Clutch detent kit for single station
S and Twin S controls.
Includes installation instructions.

Non-permeable fuel line.
Polyester reinforced.
CPE weather and UV-resistant cover.
ID: 5/16".

This kit is designed to mount the helm
at a 20 degree angle to the mounting surface.
For raised or recessed mounts, four possible
mounting configurations are available.
Horizontal recessed mount requires HA5408 drain kit.
Not for use with BayStar helm pumps.

Spent travel tube for NFB 4.2, NFB SAFE-T II, and HPS rotary helms.

Required for converting a SyTen steering cylinder to a current SeaStar Steering cylinder.

Model CCX430. Standard replacement 4300/43 type cable With bulkhead and clamp fitting 4300/43BC type 1/4-28 threaded end. Old cable part number CC692. Length: 108" (9 feet).

Model CCX430. Standard replacement 4300/43 type cable With bulkhead and clamp fitting 4300/43BC type 1/4-28 threaded end. Old cable part number CC692. Length: 312" (26 feet).

Model CCX430. Standard replacement 4300/43 type cable With bulkhead and clamp fitting 4300/43BC type 1/4-28 threaded end. Old cable part number CC692. Length: 288" (24 feet).

Model CCX430. Standard replacement 4300/43 type cable With bulkhead and clamp fitting 4300/43BC type 1/4-28 threaded end. Old cable part number CC692. Length: 336" (28 feet).

Allows the MT-3 control to be used with 43C series cables. Includes parts and instructions.

Single layer vinyl, non toxic clear tubing. FDA approved. Useful for sink, cooler, or livewell drain lines. Not recommended for hot water. Diameter: 1".

Cable clamp shim for 30 series control cables.
Used with 32010 clamp.
7/8" center to center bolt pattern.
Overall dimensions: 1-3/8" X 1/2".
Aluminum construction.

For Teleflex CH4400, CH5600 controls. Designed for transmissions supplying a maximum of 5 amps. Right hand. Mounts in port/forward or starboard/aft positions.

Smooth cover, clear PVC with white vinyl helix. Rated for full vacuum. Resistant to mild chemicals and saltwater. Used for: - Bilge pump intake and discharge - Livewell intake and drain - Sanitation: intake, vent and pump out. Designed for connections below the waterline. Not for use in pressurized systems or with antifreeze. Diameter: 2".

For Teleflex installation purposes. Includes O-rings.

PVC hose with a flexible vinyl helix. Very flexible, abrasion, salt and chemical resistant. Used for bilge pump discharge and drains. Size: 1-1/8".

Dual station kit for Twin SR control.
For 43C series cables.
Two required for twin lever controls.