Contains replacement snap rings, O-rings and seals for cylinders with snap ring type
end glands only.
For cylinders HC5340 and HC5394.

Seal kit for all SeaStar 1.7 and 2.4 helm pumps manufactured from 1984 thru 1989.

Seal kit for SeaStar HC5303, HC5312, HC5328, HC5329, HC5330,
HC5331, HC5335, HC5338, and HC5380 steering cylinders.
125 EM MV BJ ATM.
Includes thread locker.

Seal kit for HC5370 & HC5371 cylinders.

Seal kit for SeaStar HC5314, HC5326, and HC5336 steering cylinders.
150 EM MV BJ ATM.
Includes thread locker.

Seal kit for SeaStar HC5313, HC5327, and HC5332 steering cylinders.
135 EM MV BJ ATM.
Includes thread locker.

For use SeaStar HC5340, HC5341, HC5342, HC5343, HC5344,
HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375,
HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754,
& HC6755 front mount outboard hydraulic cylinders.
Includes seal glands, seal gland guide, O-rings & wrench.

Seal kit for Capilano HH0132 (250V), HH0217 (275V),
HH5250 (1250V), and HH5275 (1275V) helms. 

For use SeaStar HC5340, HC5341, HC5342, HC5343, HC5344,
HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375,
HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754,
& HC6755 front mount outboard hydraulic cylinders.     
Includes seal glands, seal gland guide, and O-rings.   
Does not include wrench.  

For bulkhead mounting of SeaStar DC tee handle control.

Shaft seal kit for Baystar 6.1 helm pumps.
Three screws, shaft seal and O-ring.

Cable clevis, pin, & cotter pin for 60 series control cable.
Pin diameter: 7/16".
Plated steel. 

Complete cylinder and piston replacement assembly.
For CL-B4 and CL-T4 Hynautic control heads.

Clear PVC with a black vinyl helix. Abrasion, saltwater, and chemical resistant, flexible. Often used for: - Bilge pump discharge - Potable water tanks fills - Drains for sinks, showers, livewells, or scuppers. This hose uses 147 right hand thread cuffs. Do not attach to thru hull fitting below the water line. Not for use with glycol-based antifreeze. Diameter: 1-1/4".  NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Spent travel tube for SAFE-T "QC", SAFE-T "TS",
and BIG-T rotary helms.

Complete steering system includes NFB helm, high efficiency
XTREME steering cable design and new style bezel.
XTREME NFB single-cable systems are suitable for most
single station boats with a single non-power-assisted
outboard engine up to V-6 and minimal engine flutter or
steering instability.
Smoothest and lowest steering effort mechanical helm
offered in the market place yet still offers easy installation.
The kit contains the following:
- SHX7606 XTREME NFB Helm, Bezel, and Hardware Kit
- SSCX64 17' XTREME QC Steering Cable

Complete steering system includes NFB helm, high efficiency
XTREME steering cable design and new style bezel.
XTREME NFB single-cable systems are suitable for most
single station boats with a single non-power-assisted
outboard engine up to V-6 and minimal engine flutter or
steering instability.
Smoothest and lowest steering effort mechanical helm
offered in the market place yet still offers easy installation.
The kit contains the following:
- SHX7606 XTREME NFB Helm, Bezel, and Hardware Kit
- SSCX64 19' XTREME QC Steering Cable

40 series.
Stud diameter: 1/4".
Lever thickness: 1/4".
Length: 15/16"

Dual station kit for S & Twin S controls.  
2 required for Twin S control.
For 43C series cables.

Vertical bleed tee.
#5MORB X 3/8" compression x bleed nipple.  
Two per package.

Horizontal bleed tee.
#5MORB X 3/8” compression x bleed nipple.
Two per package.

90˚ elbow.
#5MORB X 3/8” compression.  
Two per package. 

Straight adapter.  
3/8" compression X #5MORB.
Two per package.

Quick release cable mounting clip for OMC.
Stainless steel.
For Morse 33C style cables (30 series only).

Replacement knob for SeaStar engine controls.
3/8-24 NF thread, 1-5/8" diameter.
Color: Red

Replacement knobs for SeaStar engine controls.
3/8-24 NF thread, 1-5/8" diameter.
Color: Black

Quick connect QC II threaded helm converter.
For use with older SeaStar Safe-T and Big-T
helms with threaded spigots so those
helms can be used with SeaStar SSC62 QC
steering cables.

Double-ply soft wall, no wire.
For straight connection in wet exhaust systems.
Okay for either gasoline or diesel engines.
Designed for coolant and heat resistance.
Color: Black with blue stripe.
Temperature range: 0° to 212° F.
Diameter: 3-1/8".
Length: 12.5 feet.

Clear PVC with a black vinyl helix. Abrasion, saltwater, and chemical resistant, flexible. Often used for: - Bilge pump discharge - Potable water tanks fills - Drains for sinks, showers, livewells, or scuppers. This hose uses 147 right hand thread cuffs. Do not attach to thru hull fitting below the water line. Not for use with glycol-based antifreeze. Diameter: 1-1/2".  NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

SeaStar Pro Kevlar reinforced steering hose.  
Includes two hoses - can be used with all
SeaStar systems, except BayStar, Capilano
and 3-line inboard systems.
Factory swaged fittings.
Length: 10'

SeaStar Pro Kevlar reinforced steering hose.  
Includes two hoses - can be used with all
SeaStar systems, except BayStar, Capilano
and 3-line inboard systems.
Factory swaged fittings.
Length: 12'

SeaStar Pro Kevlar reinforced steering hose.  
Includes two hoses - can be used with all
SeaStar systems, except BayStar, Capilano
and 3-line inboard systems.
Factory swaged fittings.
Length: 16'

Dual station kit for Twin SR control.
For 33C series cables.
Two required for twin lever controls. 

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 26 feet.

Heavy-walled FDA-approved vinyl compound. Reinforced with polyester braid. Non-toxic, tasteless, odorless. Red tracer in clear PVC. Appropriate for: - Hot/cold pressurized water systems - Vent and drain lines - Bilge pump discharge. For temperature range: 25° F - 150° F. Rated for a burst pressure of 250 psi. Size: 3/8".

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 10 feet.