40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 6'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 9'.

Fire-retardant marine fuel hose.
Resists alcohol-enhanced gasoline.
High nitrile rubber construction.
Reinforced with two spirals of synthetic fabric.
Diameter: 5/16".
50 feet per box.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 30'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 27'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 22'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 17'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 11'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 19'.

Cable clamp shim for 60 series control cables.
1-1/4" center to center bolt pattern.
Overall dimensions: 1-3/4" X 5/8".
Plated steel.

60 series cable clamp and shim.  
Includes 36733 cable clamp and 37884 shim.  
Plated steel. 

Ball joint with quick release stud.
Plated steel.
For 30 series cable.
5/16" stud.

Clear PVC with a black vinyl helix. Abrasion, saltwater, and chemical resistant, flexible. Often used for: - Bilge pump discharge - Potable water tanks fills - Drains for sinks, showers, livewells, or scuppers. This hose uses 147 right hand thread cuffs. Do not attach to thru hull fitting below the water line. Not for use with glycol-based antifreeze. Diameter: 3/4".

Includes throttle and shift adapters for two cables.    
For all OMC sterndrives or 1979 to date Evinrude/Johnson outboards.
For use with 33C series cable.

Package of 10 quad rings. Part number HS6038.

Rubber construction. O-rings. Thickness: .210". 20 per package.

For Yamaha systems.
Includes tank connector, fuel connector, primer bulb.
3/8" fuel hose, 8 feet long.

Seal and O-ring kit.                    
For pre-8000 Hynautic H-80 series helms.

Seal and O-ring kit.                    
For pre-1978 Hynautic H-40 series helms.

Seal and O-ring kit.                    
For pre-1978 Hynautic H-20 series helms.

SeaStar sterndrive steering cylinder.
For non-power assist steering configurations.
Bore: 1.50"
Shaft diameter: .625”
Stroke: 7”
Volume: 8.3 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports.
Seal kit: HS5156

SeaStar sterndrive steering cylinder.
For power assist steering configurations.
Bore: 1.25"
Shaft diameter: .50”
Stroke: 8”
Volume: 8.3 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports.
Seal kit: HS5154

Hydraulic steering fluid reservoir with relief valve
mounted to bottom of reservoir.
Includes front-reading pressure gauge.
Rubber grommeted aluminum mounting bracket.
Capacity: 1 quart with pressure of 20 PSI.
Rated for 950 PSI.

Heavy-walled white FDA formula vinyl tubing. Non-toxic, tasteless, odorless. Reinforced with polyester braid. Blue tracer in clear vinyl cover. Appropriate for: Hot/cold pressurized water systems including wash down pump connections, vent and drain lines and head intake - For temperature range: 25° F - 150° F. Rated for a burst pressure of 250 psi. Size: 5/8". 250 feet per spool, or sold by the foot.

Clutch detent kit for single station Twin SR controls.
Provides positive detent at forward, neutral and reverse position.

Inboard steering cylinder for single and dual rudder vessels.
Anodized aluminum construction.
Adjustable o-ring sealed ports.
Two axis articulation.  
Supplied with bleeder fittings.  
Bore: 1.25"
Shaft diameter: .63"
Stroke: 7"
Volume: 7.2 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports.
Seal kit: HS5154
Please note that SeaStar Capilano systems use Dexron II ATF,
not SeaStar steering fluid.

Inboard steering cylinder for single and dual rudder vessels.   
Anodized aluminum construction.
Adjustable o-ring sealed ports.
Two axis articulation.  
Supplied with bleeder fittings.  
Bore: 1.35"
Shaft diameter: .63"
Stroke: 7"
Volume: 8.3 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports.
Seal kit: HS5155
Please note that SeaStar Capilano systems use Dexron II ATF,
not SeaStar steering fluid.

Adjustable pivot for Morse SF engine control.
For use with 33C series cables.

Fire-retardant marine fuel hose. Resists alcohol-enhanced gasolines. High nitrile rubber construction. Reinforced with two spirals of synthetic fabric. Diameter: 1/2". 50 feet per box.

Allows for the periodic required realignment of two outboard
motors or rudders that are linked together with a hydraulic
tie bar as opposed to a solid link or a mechanical tie bar.

Fits most power and non-power assist sterndrives. May be used with single and multiple drive systems. Aluminum construction, stainless steel shaft. 7" travel.

Vented male helm pump plug.
Must be used with helm pump on all single
steering station systems.
Must also be used on uppermost helm pump on
multi-steering station systems.
Ergonomic design to assist with the
installation and removal resulting in less
chance of over-tightening leading to damage.

Non-vented male helm pump plug.
Must be used on all helm pumps other than uppermost helm
pump on multi-steering station systems.
Ergonomic design to assist with the installation and removal
resulting  in less chance of over-tightening leading to
damage.

This kit makes bleeding and purging your SeaStar hydraulic steering system much easier.
Seastar suggests: first, pre-fill your helm, attach the filler kit with a quart of SeaStar fluid (HA5430H), puncture the bottom end of the bottle with the included pushpin, and begin the bleeding process.

This kit is designed to retrofit a new
SeaStar helm into a larger dash cut out (4.5")
or reduce helm protrusion from the dash by
the thickness of the dash.
Not for use with Baystar helm pumps.

Mounting hardware kit for MT-3 single lever control.