General purpose tie coat primer.
Use above or below waterline.
Compatible with anti-fouling bottom paints.
Compatible with all types of single component topside finishes.

General purpose tie coat primer.
Use above or below waterline.
Compatible with anti-fouling bottom paints and all types of single component topside finishes.

Designed to use with marine paints and varnishes.
Stronger solvent properties and slower evaporation.
Helps paint retain a "wet" edge for longer time.
Cleans brushes after painting.

Designed to use with marine paints and varnishes.
Stronger solvent properties and slower evaporation.
Helps paint retain a "wet" edge for longer time.
Cleans brushes after painting.
1 quart.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
 
Color: "Dull Dead Grass".
 
Size: Quart.

Bio-Blue hull surface preperant #92.
De-waxes, cleans, etches.
Easy to use.
Biodegradable and solvent free.
Prepares bare fiberglass hulls for painting.
Size: 1 qt.

Bio-Blue hull surface preperant #92.
De-waxes, cleans, etches.
Easy to use.
Biodegradable and solvent free.
Prepares bare fiberglass hulls for painting.
Size: 1 gal.

Features long-lasting UV absorbers.
Provides outstanding gloss retention and UV protection.
Golden amber color.
One quart.

Penetrates raw wood.
Gives improved stability and moisture resistance.
Prevents excessive absorption of undercoaters and varnishes.
Tung/linseed oil phenolic based resin.
Not for use on teak.
Applies easily by brush or spray.
Size: 1 quart.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
 
Color: "Blue Ice".
 
Size: Quart.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
 
Color: "Jade Green".
 
Size: Quart.

A traditional tough and flexible standard for marine use.
Protects your boat's finish from damaging UV rays.
Will give a light amber tint to brightwork.
Gives a rich, mirror-like finish and abrasion resistance.
Size: 1 quart.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
Color: "Bikini Blue".
Size: Quart.

A lightweight, fast-curing, two-part epoxy putty.
For filling and smoothing surface imperfections.
Safe for use above and below the waterline.
An integral part of Pettit's gelcoat blister repair system.
Also used for leveling metal keels or other underwater areas.
Excellent chemical and water resistance.
Non-sagging, non-shrinking and easy to apply.
Color: Off-white.
Size: 1.5 quarts.

A lightweight, fast-curing, two-part epoxy putty.
For filling and smoothing surface imperfections.
Safe for use above and below the waterline.
An integral part of Pettit's gelcoat blister repair system.
Also used for leveling metal keels or other underwater areas.
Excellent chemical and water resistance.
Non-sagging, non-shrinking and easy to apply.
Color: Off-white.
Size: 8.5 ounces.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
 
Color: "Kelly Green".
 
Size: Quart.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
 
Color: "Seafoam Green".
 
Size: Quart.

Textured foam roller.
Designed specifically to apply Tuff Coat nonskid coating.
Will evenly distribute the material, which can't be achieved with a standard roller.
Length: 9".

One per package.

Multi-season antifouling bottom paint.
High copper and high density biocide load.
Provides economical hybrid protection.
Polishes to a smooth finish over time.
Compatible over most bottom paints.
Color: Blue.
Size: 1 gallon.

Designed to use with marine paints and varnishes.
Contains mineral spirits and Xylol.
Requires the use of a NIOSH/OSHA approved fitted respirator.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
 
Color: "Burgundy".
 
Size: Quart.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
 
Color: "Fire Red".
 
Size: Quart.

For Cyclone mixer.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
 
Color: "Dark Gray".
 
Size: 1 qt.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
 
Color: "Grand Banks Beige".
 
Size: Quart.

Provides strong multi-season performance.
Powerful dual biocide for protection under all conditions.
Gives the benefits of both hard and ablative paints.
For fiberglass, wood or aluminum hulls.
Dries to a burnishable racing finish.
Hard, smooth surface is exvellent for trailered boats.
Contains 25% cuprous thiocyanate and 2.8% zinc pyrithione.
Color: Blue.
Size: 1 gal.

2 component epoxy-polyamide coating for use on sandblasted aluminum where maximum resistance to fresh or salt water is required
Smooth finish provides an excellent bonding surface for additional primers or topcoats
Excellent water, chemical and corrosion resistance for aluminum.
High performance Strontium chromate primer for all aluminum.
Size: .75 gallon kit.

White undercoated smoothes out any surface.
Base coat for aged, cracked, pitted surfaces
For fiberglass, wood, previously painted surfaces.
Dries quickly - easy to sand.
Use Pettit 120 brushing thinner.

White Easypoxy undercoater.
Smoothes out any surface.
A base coat for aged, cracked, pitted surfaces.
Use it on fiberglass, wood, previously painted surfaces.
Dries quickly and is easy to sand.
Mixes with Pettit 120 brushing thinner.
Size: 1 gallon.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
 
Color: "Sandstone".
 
Size: Quart.

A heavy-duty two-part coating.
May be used on practically any part of a boat.
Excellent for protecting underwater metal from corrosion.
Forms a tight, durable chemical-resistant film.
56% solids by volume.
Size: 1 gallon kit