Hand pocket puller tool.
Designed to keep lines in place, even in heavy seas.
Self contained, lightweight, easy to use.
Helps protect gunwales.
Cleats for 3/16" to 5/16" lines.

8" extension piece for Pocket Puller. Simple to use, just snap into place.

Tough reinforced nylon construction. Fits Scotty post rod holder mounts. Makes retrieving crab traps easy. Does not include a mount.

Hands-free electric crab pot puller system.
A wheel system that keeps pressure on crab pot line.
Eliminates the need to lightly pull on the rope.
Simply thread line, engage, and watch your pot come up.
Fits any of the EZ Pull units; easy to install.

On/off switch for EZ-Pull.
For us with EZ-Pull electric pot pullers.

This package includes:
- Sleeved gunnel mount and sleeved deck mount
- Aluminum pulley block
- Davit
- Electrical switch assembly
- Hauling motor.

Davit is 2" schedule 80 aluminum tubing - 74" tall with a reach of 32".
Equipped with a 2.5 HP DC motor. This unit pulls 160 feet per minute, and has a pulling capacity of 225 pounds, and it accepts line sizes 1/4" to 3/8".
The manufacturer recommends this unit for pulling multiple pots on one line.

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

A powerful recreational line hauler.
Can pull 1-3 prawn traps or a crab trap.
Runs quiet and stores easily.
Added corrosion protection so it’s ready for the harsh salt water environment.
Rated for a maximum load of 110 pounds.
Easy, quick mounting and storage
Accommodates 3/16” – 5/16” (about 5-8mm) line size.
Tough epoxy powder-coated aluminum frame resists corrosion, heavy-duty aluminum frame and boom.
Boom folds down to stow in frame.

Hydro-Slave hanging pot hauler. Equipped with a Char-Lynn 1003 5.9 CID motor. Complete with a cast aluminum housing. - Stainless steel discs. - Stainless steel center hub and splitter - Aluminum fairlead rollers with stainless steel pins. Provides 380 lbs. line pull, 35 RPM per gallon.

Hydro-Slave hanging pot hauler. Equipped with a Char-Lynn 1004 9.7 CID motor. Complete with a cast aluminum housing. - Stainless steel discs. - Stainless steel center hub and splitter. - Aluminum fairlead rollers with stainless steel pins. Provides 550 lbs. line pull, 22 RPM per gallon.

Hydro-Slave hanging pot hauler. Equipped with a Char-Lynn 1005 11.3 CID motor. Complete with a cast aluminum housing. - Stainless steel discs. - Stainless steel center hub and splitter - Aluminum fairlead rollers with stainless steel pins. Provides 660 lbs. line pull, 19 RPM per gallon.

Twin 50 amp breaker with busbar. For use with EZ-Puller electric pot pullers.

This package includes:
- Sleeved gunnel mount, flat base mount
- Aluminum pulley block
- Davit
- Electrical switch assembly
- Hauling motor.

Davit is 1-1/2" schedule 40 aluminum tubing - 64" tall and has a reach of 26".

Equipped with a 1.9 HP DC motor. This unit pulls at 140 feet per minute and has a pulling capacity of 150 pounds. Accepts line sizes 1/4" to 3/8".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Hydro-slave pot hauler block. Equipped with a 1008 Char-Lynn motor. Complete with extra heavy anodized cast aluminum housing. - Stainless steel discs. - Cadmium-plated disc liners. - Stainless steel center hub and splitter. - Aluminum fairlead rollers with stainless steel shafts. Ports are 1/2" NPTF with 45° hydraulic fittings. Provides 1025 lbs line pull, 10 RPM per gallon.

Hydro-slave pot hauler block. Equipped with a 1006 Char-Lynn motor. Complete with extra heavy anodized cast aluminum housing. - Stainless steel discs. - Cadmium-plated disc liners. - Stainless steel center hub and splitter. - Aluminum fairlead rollers with stainless steel shafts. Ports are 1/2" NPTF with 45° hydraulic fittings.

Hydro-slave pot hauler block. Equipped with a 1004 Char-Lynn motor. Complete with extra heavy anodized cast aluminum housing. - Stainless steel discs. - Cadmium-plated disc liners. - Stainless steel center hub and splitter. - Aluminum fairlead rollers with stainless steel shafts. Ports are 1/2" NPTF with 45° hydraulic fittings. Provides 600 lbs line pull, 22 RPM per gallon.

Hydro-slave bulkhead pot hauler. Equipped with a 1003 Char-Lynn motor. Complete with extra heavy anodized cast aluminum housing. - Stainless steel discs. - Cadmium-plated disc liners. - Stainless steel center hub and splitter. - Aluminum fairlead rollers with stainless steel shafts. Ports are 1/2" NPTF with 45° hydraulic fittings. Provides 380 lbs. line pull, 35 RPM per gallon.

This package includes:
- Sleeved gunnel mount, flat base mount
- Aluminum pulley block
- Davit
- Electrical switch assembly
- Hauling motor.

Davit is 1-1/2" schedule 80 aluminum tubing - 64" tall and has a reach of 26".

Equipped with a 1.9 HP DC motor. This unit pulls at 140 feet per minute and has a pulling capacity of 150 pounds. Accepts line sizes 1/4" to 3/8".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Octagonal laid-back trigger crab pot.
Three high ramp entrance tunnels with laid back triggers, built-in bait tube.
11 gauge vinyl-coated wire construction.
Side door for crab removal, top door for bait access.
Good for overnight soaks and strong current areas.
Built-in bait tube is built from 1/2" x 1" bright yellow mesh.
High ramp tunnel design is fast-catching yet holds crab securely.
The yellow bait tube brings them in and the ramps keep them there.
Dimensions: 13" X 30".

Not intended for commercial use.

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

An octagonal shrimp pot with four tunnel entrances.
Exclusive ladder-ramp openings make this pot a top producer.
Has plenty of room to hold lots of shrimp.
High-quality vinyl-coated 14 gauge steel wire construction.
6" X 17" round bait tube, with a separate opening.
4" entrances.
Equipped with a "rottin' cotton" escape hatch that will allow shrimp to escape if pot is lost.
 
Overall dimensions: 30" X 17".
 
Not intended for commercial use. Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.