Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22
Home  > BoatLife / Life Ind.(x)
View:
BoatLIFE Life Calk sealant
BoatLIFE Life Calk sealant. Non-shrinking, flexible, sandable compound. A low-viscosity, free-flowing polysulfide solution. Offers excellent resistance to petroleum derivatives. Ideal for hull hardware, fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal. Color: White. Size: 5.2 fl. oz. Weight: .4 lb.
Item#:
BTL1372
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
25.9000
Your Price:
22.02
EACH
Teak Brite teak oil - 'golden'
Teak Brite natural teak oil and sealer. Billed as "the most advanced teak oil and sealer available." Delivers long-lasting protection in all climates.

If you have teak to maintain, follow the BoatLIFE teak restoration system: it's gentle and non-damaging but highly effective.

1: Cleaning

There are two different Teak Brite products that clean without harming natural teak wood: Teak Brite Powder Cleaner and Teak Brite Kreme Cleaner. The powder must be scrubbed, and the cream should be allowed to sit, before wiping down the wood.

2: Brightening

A middle step in the Teak Brite restoration system. Some boat owners like restore a lighter shade to their teak before applying teak oil.

3: Oiling / Sealing

The final step in the Teak Brite restoration system: applying oil to seal and protect the teak.

Teak Brite Oil Sealer exhibits the beauty of teak, prevents graying, and protects wood. Simply apply liberally on dry teak and allow to dry. Do not apply on wet/damp wood. This product penetrates deep into teak to feed the natural oils and protect finishes. It's vital to the life of the timber itself, and is absolutely necessary to keep teak in its best possible condition. If you try to clean teak without reapplying oil, it will quickly oxidize, turn gray and soil much more easily. However, you need to use care when applying teak oil. If you use too much, it will have a varnished appearance and will wear unevenly.

Teak Brite will not damage vinyl, plastic, fiberglass, polysulfide, deck sealant, or other seam compounds.

Color: Golden teak.

Size: 1 quart.
Item#:
BTL1188
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
52.5100
Your Price:
44.63
EACH
Environmentally safe, non-phosphate, biodegradable formula.
Cleans without removing wax from fiberglass.
Use anywhere on your boat.
Pleasant fragrance.
Size: 1 gallon.
Item#:
BTL1113
Manufacturer:
BoatLife / Life Ind.
Available:
Out of Stock
33.8100
Your Price:
28.74
EACH
Call to Order
Environmentally safe, non-phosphate, biodegradable formula.
Cleans without removing wax from fiberglass.
Use anywhere on your boat.
Pleasant fragrance.
Size: 1 qt.
Item#:
BTL1112
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
14.4600
Your Price:
12.29
EACH
BoatLIFE PolyShine boat polish
BoatLIFE PolyShine boat polish. An easy-to-use liquid polymer formula for fiberglass hulls. Shines and protects your boat's surfaces. Brightens chrome and stainless steel hardware. May be applied by hand or by machine. Size: 1 pint. Weight: 1.07 lb.
Item#:
BTL1122
Manufacturer:
BoatLife / Life Ind.
Available:
Out of Stock
26.7600
Your Price:
22.74
EACH
Call to Order
VinyLIFE cleaner / protectant
BoatLIFE VinyLIFE cleaner and protectant. A dual-purpose product: protects as it cleans. Great for interior and exterior vinyl surfaces. Use it on your seats, tops, upholstery, fenders and more. Restores and brightens colors. Removes dirt, grime and stains. UV protectant. Size: 1 pint. Weight: 1.23 lb.
Item#:
BTL1123
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
31.3800
Your Price:
26.67
EACH
BoatLIFE test tank cleaner
BoatLIFE test tank cleaner. Designed for engine test tanks. Emulsifies oil in water and removes oil slicks. Non-foaming fomula strips away oil and dirt. Safe for use with rubber impellers and hoses. Also useful as a dispersant in small oil spills. Size: 1 gallon. Weight: 8.72 lbs.
Item#:
BTL1127
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
70.1300
Your Price:
59.61
EACH
BoatLIFE LifeWax
BoatLIFE LifeWax. A long-lasting carnauba formula for protecting fiberglass. "The finest marine grade paste wax available." Great for all environments, including tropical climates. Formulated with superior UV filters for ultimate protection. Size: 9 oz. tin. Weight: .7 lbs
Item#:
BTL1130
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
26.4100
Your Price:
22.44
EACH
BoatLIFE silicone rubber
BoatLIFE silicone rubber sealant. An all-purpose, non-corrosive, high-quality formula. Usable above or below the waterline. Flexible; will not shrink, crack, or dry out. Adheres well to fiberglass, plastic, wood, and metal. Acid-free, will not corrode metallic surfaces. Color: Clear. Size: 2.8 fl. oz. Weight: .22 lb.
Item#:
BTL1140
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
14.7100
Your Price:
12.50
EACH
BoatLIFE silicone rubber
BoatLIFE silicone rubber sealant. An all-purpose, non-corrosive, high-quality formula. Usable above or below the waterline. Flexible; will not shrink, crack, or dry out. Adheres well to fiberglass, plastic, wood, and metal. Acid-free, will not corrode metallic surfaces. Color: Black. Size: 2.8 fl. oz. Weight: .22 lb.
Item#:
BTL1142
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
14.7100
Your Price:
12.50
EACH
BoatLIFE silicone rubber
BoatLIFE silicone rubber sealant. An all-purpose, non-corrosive, high-quality formula. Usable above or below the waterline. Flexible; will not shrink, crack, or dry out. Adheres well to fiberglass, plastic, wood, and metal. Acid-free, will not corrode metallic surfaces. Color: White. Size: 2.8 fl. oz. Weight: .22 lb.
Item#:
BTL1141
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
14.7100
Your Price:
12.50
EACH
BoatLIFE silicone rubber
BoatLIFE silicone rubber sealant. An all-purpose, non-corrosive, high-quality formula. Usable above or below the waterline. Flexible; will not shrink, crack, or dry out. Adheres well to fiberglass, plastic, wood, and metal. Acid-free, will not corrode metallic surfaces. Color: White. Size: 10.48 fl. oz. Weight: .83 lb.
Item#:
BTL1151
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
29.2400
Your Price:
24.86
EACH
BoatLIFE silicone rubber
BoatLIFE silicone rubber sealant. An all-purpose, non-corrosive, high-quality formula. Usable above or below the waterline. Flexible; will not shrink, crack, or dry out. Adheres well to fiberglass, plastic, wood, and metal. Acid-free, will not corrode metallic surfaces. Color: Clear. Size: 10.48 fl. oz. Weight: .83 lb.
Item#:
BTL1150
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
29.2400
Your Price:
24.86
EACH
BoatLIFE silicone rubber
BoatLIFE silicone rubber sealant. An all-purpose, non-corrosive, high-quality formula. Usable above or below the waterline. Flexible; will not shrink, crack, or dry out. Adheres well to fiberglass, plastic, wood, and metal. Acid-free, will not corrode metallic surfaces. Color: Black. Size: 10.48 fl. oz. Weight: .83 lb.
Item#:
BTL1152
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
29.2400
Your Price:
24.86
EACH
Release adhesive remover
Release adhesive and sealant remover. For removing cured sealants from fiberglass, wood, metal. Ideal for use on residue from decals, tapes and the like. Safe to use on most vinyl, plastic and other surfaces. Size: 1 pint. Weight: 2.72 lb.
Item#:
BTL1288
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
70.4600
Your Price:
59.89
EACH
Release adhesive remover
Release adhesive and sealant remover. For removing cured sealants from fiberglass, wood, metal. Ideal for use on residue from decals, tapes and the like. Safe to use on most vinyl, plastic and other surfaces. Size: 1 oz. Weight: .17 lb.
Item#:
BTL1291
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
18.7700
Your Price:
15.96
EACH
Life Calk - white
BoatLIFE Life Calk sealant. Non-shrinking, flexible, sandable compound. A low-viscosity, free-flowing polysulfide solution. Designed for use on fine cracks and seams. Offers excellent resistance to petroleum derivatives. Ideal for hull hardware, fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal. Color: White. Size: 1 oz tube.
Item#:
BTL1305
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
13.4500
Your Price:
11.44
EACH
Git Rot liquid epoxy kit
Repairs dried-out, rotted, and weathered wood. This unique two-part liquid epoxy saturates and restores original strength to wood by penetrating the rot. Actually works with the loose rotted fibers. Wood must be dry before application. Apply by injecting into wood. The epoxy will soak into wood by capillary action.

One-half hour pot life after mixing. Sandable, paintable, and can be drilled and screwed. Compatible with fiberglass resins, epoxies and most sealants. Great for transoms, stringers and cabin roof rot in both fiberglass and wood boats.

How to use Git-Rot:
 
First, locate the dry rot. There are a couple of techniques you can use to find dry rot - try tapping suspect areas with a hard instrument and listen for those "hollow-sounding" dead spots. Use a knife to probe where you think water is likely to pool or places that are constantly being re-wetted. In particular, make sure you check around hatches, seams, transom, planking, toe rails, stem and ribs.

For maximum strength and saturation, you will need a volume of Git-Rot epoxy approximately equal to half the volume of the rotted wood. When using Git-Rot, only mix small batches (around 4 oz.) since the larger the quantity, the greater the reaction and the faster the cure. Mix 1 part "B" and 3 parts "A", and shake vigorously for a minute. Immediately apply to the dry rotted area -- the epoxy penetrates best immediately after it's mixed. It will solidify overnight, but needs a full week for maximum strength.

Size: 4 oz.
Item#:
BTL1063
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
 
Ground Shipping Only
33.2100
Your Price:
28.23
EACH
Git-Rot liquid epoxy kit
Repairs dried-out, rotted, and weathered wood. This unique two-part liquid epoxy saturates and restores original strength to wood by penetrating the rot. Actually works with the loose rotted fibers. Wood must be dry before application. Apply by injecting into wood. The epoxy will soak into wood by capillary action.

One-half hour pot life after mixing. Sandable, paintable, and can be drilled and screwed. Compatible with fiberglass resins, epoxies and most sealants. Great for transoms, stringers and cabin roof rot in both fiberglass and wood boats.

How to use Git-Rot:
 
First, locate the dry rot. There are a couple of techniques you can use to find dry rot - try tapping suspect areas with a hard instrument and listen for those "hollow-sounding" dead spots. Use a knife to probe where you think water is likely to pool or places that are constantly being re-wetted. In particular, make sure you check around hatches, seams, transom, planking, toe rails, stem and ribs.

For maximum strength and saturation, you will need a volume of Git-Rot epoxy approximately equal to half the volume of the rotted wood. When using Git-Rot, only mix small batches (around 4 oz.) since the larger the quantity, the greater the reaction and the faster the cure. Mix 1 part "B" and 3 parts "A", and shake vigorously for a minute. Immediately apply to the dry rotted area -- the epoxy penetrates best immediately after it's mixed. It will solidify overnight, but needs a full week for maximum strength.

Size: 1 quart.
Item#:
BTL1065
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
 
Ground Shipping Only
128.0100
Your Price:
108.81
EACH
Git-Rot liquid epoxy kit
Repairs dried-out, rotted, and weathered wood. This unique two-part liquid epoxy saturates and restores original strength to wood by penetrating the rot. Actually works with the loose rotted fibers. Wood must be dry before application. Apply by injecting into wood. The epoxy will soak into wood by capillary action.

One-half hour pot life after mixing. Sandable, paintable, and can be drilled and screwed. Compatible with fiberglass resins, epoxies and most sealants. Great for transoms, stringers and cabin roof rot in both fiberglass and wood boats.

How to use Git-Rot:
 
First, locate the dry rot. There are a couple of techniques you can use to find dry rot - try tapping suspect areas with a hard instrument and listen for those "hollow-sounding" dead spots. Use a knife to probe where you think water is likely to pool or places that are constantly being re-wetted. In particular, make sure you check around hatches, seams, transom, planking, toe rails, stem and ribs.

For maximum strength and saturation, you will need a volume of Git-Rot epoxy approximately equal to half the volume of the rotted wood. When using Git-Rot, only mix small batches (around 4 oz.) since the larger the quantity, the greater the reaction and the faster the cure. Mix 1 part "B" and 3 parts "A", and shake vigorously for a minute. Immediately apply to the dry rotted area -- the epoxy penetrates best immediately after it's mixed. It will solidify overnight, but needs a full week for maximum strength.

Size: 1 pint.
Item#:
BTL1064
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
 
Ground Shipping Only
75.8800
Your Price:
64.50
EACH
Teak Brite teak brightener
Teak Brite teak brightener: a single-part liquid cleaner and brightener for teak. It bleaches teak to a lighter shade, which helps eliminate graying from weather exposure. Ideal for mid-season clean up of dirt, grease, food stains and oil.

If you have teak to maintain, follow the BoatLIFE teak restoration system: it's gentle and non-damaging but highly effective.

1: Cleaning

There are two different Teak Brite products that clean without harming natural teak wood: Teak Brite Powder Cleaner and Teak Brite Kreme Cleaner. The powder must be scrubbed, and the cream should be allowed to sit, before wiping down the wood.

2: Brightening

A middle step in the Teak Brite restoration system. Some boat owners like restore a lighter shade to their teak before applying teak oil. They use this product, Teak Brite teak brightener. Application is simple, apply and rub in, then rinse thoroughly with water and allow drying completely before applying teak oil sealer.

3: Oiling / Sealing

The final step in the Teak Brite restoration system: applying oil to seal and protect the teak. Teak Brite Oil Sealer exhibits the beauty of teak, prevents graying, and protects wood. It's vital to the life of the timber itself, and is absolutely necessary to keep teak in its best possible condition. If you try to clean teak without reapplying oil, it will quickly oxidize, turn gray and soil much more easily. However, you need to use care when applying teak oil. If you use too much, it will have a varnished appearance and will wear unevenly.

Teak Brite will not damage vinyl, plastic, fiberglass, polysulfide, deck sealant, or other seam compounds.

Size: 1 quart.
Item#:
BTL1087
Manufacturer:
BoatLife / Life Ind.
Available:
Out of Stock
29.6200
Your Price:
25.18
EACH
Call to Order
Teak Brite teak oil - 'natural'
Teak Brite natural teak oil / sealer. Billed as "the most advanced teak oil and sealer available." Delivers long-lasting protection in all climates.

If you have teak to maintain, follow the BoatLIFE teak restoration system: it's gentle and non-damaging but highly effective.

1: Cleaning

There are two different Teak Brite products that clean without harming natural teak wood: Teak Brite Powder Cleaner and Teak Brite Kreme Cleaner. The powder must be scrubbed, and the cream should be allowed to sit, before wiping down the wood.

2: Brightening

A middle step in the Teak Brite restoration system. Some boat owners like restore a lighter shade to their teak before applying teak oil.

3: Oiling / Sealing

The final step in the Teak Brite restoration system: applying oil to seal and protect the teak.

Teak Brite Oil / Sealer exhibits the beauty of teak, prevents graying, and protects wood. Simply apply liberally on dry teak and allow to dry. Do not apply on wet/damp wood. This product penetrates deep into teak to feed the natural oils and protect finishes. It's vital to the life of the timber itself, and is absolutely necessary to keep teak in its best possible condition. If you try to clean teak without reapplying oil, it will quickly oxidize, turn gray and soil much more easily. However, you need to use care when applying teak oil. If you use too much, it will have a varnished appearance and will wear unevenly.

Teak Brite will not damage vinyl, plastic, fiberglass, polysulfide, deck sealant, or other seam compounds.

Color: Natural teak.

Size: 1 quart.
Item#:
BTL1088
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
50.4500
Your Price:
42.88
EACH
Life Calk sealant - brown
BoatLIFE Life Calk sealant. Non-shrinking, flexible, sandable compound. A low-viscosity, free-flowing polysulfide solution. Offers excellent resistance to petroleum derivatives. Ideal for hull hardware, fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal. Color: Brown. Size: 10.5 oz tube. Weight: 1.4 lb.
Item#:
BTL1036
Manufacturer:
BoatLife / Life Ind.
Available:
Out of Stock
41.3100
Your Price:
35.12
EACH
Call to Order
Life Calk sealant - brown
BoatLIFE Life Calk sealant. Non-shrinking, flexible, sandable compound. A low-viscosity, free-flowing polysulfide solution. Offers excellent resistance to petroleum derivatives. Ideal for hull hardware, fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal. Color: Brown. Size: 80 ml tube. Weight: .42 lb.
Item#:
BTL1037
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
21.7400
Your Price:
18.48
EACH
Liquid Life Calk - white
BoatLIFE Life Calk liquid sealant. Non-shrinking, flexible, sandable compound. A low-viscosity, free-flowing polysulfide solution. Designed for use on fine cracks and seams. Offers excellent resistance to petroleum derivatives. Ideal for hull hardware, fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal. Color: White. Size: 80 ml tube. Weight: .4 lb.
Item#:
BTL1052
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
17.9200
Your Price:
15.23
EACH
Liquid Life Calk - black
BoatLIFE Life Calk liquid sealant. Non-shrinking, flexible, sandable compound. A low-viscosity, free-flowing polysulfide solution. Designed for use on fine cracks and seams. Offers excellent resistance to petroleum derivatives. Ideal for hull hardware, fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal. Color: Black. Size: 80 ml tube. Weight: .4 lb.
Item#:
BTL1055
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
17.9200
Your Price:
15.23
EACH
Life Calk primer
BoatLIFE Life Calk primer. One-part, resin-based primer for use on oily woods. Promotes maximum adhesion for polysulfide sealants. Intended for use with Life Calk. Size: 8 fl. oz. Weight: .65 lb.
Item#:
BTL1059
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
34.3600
Your Price:
29.21
EACH
Heavy-duty fiberglass cleaner and stain remover. Non-scratching powder cleanses dirt and stains. Ideal for non-skid surfaces. Will remove rust stains, scuffmarks and black streaks. Rinses off with fresh or salt water. Size: 26 oz. Weight: 2.08 lbs.
Item#:
BTL1190
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
27.5300
Your Price:
23.40
EACH
Two-part Fix repair putty
Fix repair putty. A non-sagging repair putty that cures like steel. May be used underwater. Once cured, Fix putty may be drilled, sanded and painted. Bonds well to fiberglass, wood, metal, glass and concrete. Easily cleaned up with soap and water (before cure). Size: 3 oz. Weight: .2 lb.
Item#:
BTL1197
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
32.5000
Your Price:
27.63
EACH
Life Seal - clear
BoatLIFE Life Seal. A unique combination of marine silicone and polyurethane. Formulated for use on fiberglass hulls. Fast-curing, low odor, non-corrosive and non-yellowing. Provides a durable, permanent watertight seal. May be used above and below the waterline. Use for sealing decks to hulls, fittings, and hardware. Adheres to metal, glass, wood, Lexan, and ABS. Color: Clear. Size: 1 fl. oz. Weight: .17 lbs.
Item#:
BTL1109
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
13.4500
Your Price:
11.44
EACH
BoatLIFE bilge cleaner
BoatLIFE bilge cleaner. Emulsifies oil and scum, makes your bilge clean. Water-based, non-foaming, biodegradable and phosphate-free. Works well as a carpet, uphostery or fabric cleaner, too. Removes mold and mildew. Great for fish and bait wells. Size: 1 quart. Weight: 2.3 lb
Item#:
BTL1102
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
20.4600
Your Price:
17.39
EACH
BoatLIFE fiberglass compound
BoatLIFE fiberglass rubbing compound. A very fine compound for smoothing out gel coat surfaces. Mimizes gel coat loss as it smooths out finishes. Restores by removing heavy oxidation and stains. Used to prepare fiberglass for waxing. Size: 16 oz. Weight: 1.25 lbs.
Item#:
BTL1131
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
33.4800
Your Price:
28.46
EACH
BoatLIFE mildew remover spray
BoatLIFE mildew remover spray. Features a chlorine-free and acid-neutral formula. Simply spray on and wipe down to remove mildew. Controls odor, too. Safe for most fabrics. Size: 16 oz. Weight: 1.03 lbs.
Item#:
BTL1137
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
30.7000
Your Price:
26.09
EACH
Liquid Life Seal - clear
BoatLIFE Liquid Life Seal. A unique combination of marine silicone and polyurethane. Self-leveling liquid formula for fine cracks and seams. Formulated for use on fiberglass hulls. Fast-curing, low odor, non-corrosive and non-yellowing. Provides a durable, permanent watertight seal. May be used above and below the waterline. Use for sealing decks to hulls, fittings, and hardware. Adheres to metal, glass, wood, Lexan, and ABS. Color: Clear. Size: 5.24 fl. oz. Weight: .4 lbs.
Item#:
BTL1159
Manufacturer:
BoatLife / Life Ind.
Available:
Out of Stock
40.7400
Your Price:
34.63
EACH
Call to Order
BoatLIFE Life Seal - clear
A unique combination of marine silicone and polyurethane. Formulated for use on fiberglass hulls. Fast-curing, low odor, non-corrosive and non-yellowing. Provides a durable, permanent watertight seal. May be used above and below the waterline. Use for sealing decks to hulls, fittings, and hardware. Adheres to metal, glass, wood, Lexan, and ABS. Color: Clear. Size: 2.8 fl. oz.
Item#:
BTL1160
Manufacturer:
BoatLife / Life Ind.
Available:
Out of Stock
18.9300
Your Price:
16.09
EACH
Call to Order
BoatLIFE Life Seal - black
A unique combination of marine silicone and polyurethane. Formulated for use on fiberglass hulls. Fast-curing, low odor, non-corrosive and non-yellowing. Provides a durable, permanent watertight seal. May be used above and below the waterline. Use for sealing decks to hulls, fittings, and hardware. Adheres to metal, glass, wood, Lexan, and ABS. Color: Black. Size: 2.8 fl. oz.
Item#:
BTL1162
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
18.9300
Your Price:
16.09
EACH
View: