Ramie yarn, thoroughly impregnated with paraffin. Square plait construction, coated with mineral oil. Designed to resist water, oils, and chemicals. Color: Off-white. Thickness: 1". 2.4 feet per roll.

60 series. Diameter: 5/16".

Dual station kit for SeaStar CH5600P control.
For use with 33C series cables.
Includes instructions. 

Rubber-lined brass sleeve bearing. Adapts well to struts and stern-tube mounts. Precision fitted for shafts with proper clearance. Brass shells, chemical-resistant nitrile rubber interiors. Stocking name: BASE. Shaft/sleeve size: 1". Outside diameter: 2". Length: 4". Weight: 1.3 lb.

Dual station adapter kit for adapting throttle
or clutch from 33C series cable to 43C series cable.  
Includes instructions.

Dual station kit for Twin S controls.
For 33C series cables.

40 series cable clamp and shim kit.
Includes 31532 cable clamp and 31538 shim.
Also includes 2 nuts, lock washers, and bolts  
Plated steel.

Universal attachment kit for inboards and outdrives.  
For use with 33C series cables.  
Includes two SeaStar CA-37701 ball joints and two CA-35074 brackets.

High-density, UV-resistant nonmetallic jacket.
For use with MOR317310 vernier control head.
10-32 threaded stainless steel end.
Vernier cable only.
Length: 6'. 

Cast bronze. Shaft size: 1-3/8".

Used in conjunction with BayStar and SeaStar kits.
Required on some outboard applications.
 For use with Teleflex hydraulic steering cylinder HC5345 and HC5358.

Dual connection throttle and shift connection kit. Connects two 3300 type engine control cables. Includes instructions and 14 pieces of hardware.

Replacement knob for Kobelt engine controls.
3/8-16 NC thread, 1-19/64" diameter.
Color: Red.

Fits Kobelt 2009 engine control.
For use with 33C series cable.

For test runs and coolant system flushing.
Designed to fit most outboard motors, 15 HP and under.
Easy slip-on fit.
Dimensions: 7.4" X 3.6".

33C cable features high efficiency armored core technology.
Specially processed polymer liner minimizes friction.
Heavy duty, high density, non-hydroscopic polymer jacket.
End fittings utilize stainless steel and nickel plated brass components.
Durable polymer seals & boots minimizes contamination and moisture from entering cable.
Comparison grades: Pro-X A-7100, SeaStar CCX633, Morse 301947, and Uflex Czero cables.
10-32 threaded ends.

Length: 4.5'.

33LU cable with Tee knob.
Easy to install and operate.
For remote control of choke, throttle or other applications.
Solid stainless core in a non-metallic liner.
Cable can be shortened to needed dimensions.
Size: 20 feet.

33LU cable with Tee knob.
Easy to install and operate.
For remote control of choke, throttle or other applications.
Solid stainless core in a non-metallic liner.
Cable can be shortened to needed dimensions.
Size: 15 feet.

33LU cable with Tee knob.
Easy to install and operate.
For remote control of choke, throttle or other applications.
Solid stainless core in a non-metallic liner.
Cable can be shortened to needed dimensions.
Size: 5 feet.

Universal, EPA compliant primer bulb.
Stainless steel bands.
Synthetic rubber bulb.
Stays flexible in cold or warm climates.
ID: 1/4".

Synthetic yarn, thoroughly impregnated with PTFE. Coated with PTFE dispersion and a break-in lubricant. Designed to resist water, oils, and chemicals. Color: White. Thickness: 1/4". 24 feet per roll.

Synthetic yarn, thoroughly impregnated with PTFE. Coated with PTFE dispersion and a break-in lubricant. Designed to resist water, oils, and chemicals. Color: White. Thickness: 1/8". 70.9 feet per roll.

For Morse 100 series control systems. Diameter: 7/16".

30 series cable clamp and shim kit.  
Includes 31509 cable clamp and 31538 shim.
Also includes 2 nuts and bolts.  
Plated steel.

Parts for a top mount twin setup.

Ball Joints 1-1/8" 17/32" 11/16" 5/16-24" ST 30 Series

Adapts 33C series cables to be used with OMC engine controls.

For accelerator pedal.

Manganese bronze construction. Length: 13". Shaft size: 1-3/4". Key way: 3/8".

Ramie yarn, thoroughly impregnated with paraffin. Square plait construction, coated with mineral oil. Designed to resist water, oils, and chemicals. Color: Off-white. Thickness: 3/16". 46.5 feet per roll.

Rubber-lined brass sleeve bearing. Adapts well to struts and stern-tube mounts. Precision fitted for shafts with proper clearance. Brass shells, chemical-resistant nitrile rubber interiors. Stocking name: BULL. Shaft/sleeve size: 1-7/8". Outside diameter: 2-15/16". Length: 7-1/2". Weight: 3 lbs.

Custom built for smaller boats. Carefully machined to leave correct clearance. Brass shells, chemical resistant nitrile rubber interiors. Dimensions: 1-1/2" X 2-3/8" X 6".

Replacement control handle for Hynautic control head.
Brushed anodized aluminium.
Black synthetic knob.

Replacement control handle for Hynautic control head.
Brushed anodized aluminum.
Red synthetic knob.

Hand lever for a dual-function, single-lever control.
Sturdy, traditionally styled top-mounted handle provides one-handed engine control with excellent feel characteristics.
Start and warm-up are done by pulling out hand levers in the neutral position.
This disengages the clutch and allows throttle to be advanced in neutral.
Returning to neutral detent re-engages clutch.

Graphtex Ultra shaft packing material. A unique blend of graphite fibers and PTFE. Thermal conductive, strong and very durable. Dissipates heat away from stuffing boxes. Thickness: 1/4". Length: 2 feet.