Replacement seals. Fits MRB-50A actuator.

Electronic Trim Tab angle indicator station. An instrument to show your boat leveling system's angle. Compatible with all Insta Trim systems. Perfect for setting up a second station (fly bridge). Indicator panel and 15 foot wire harness. Weight: .44 lbs.

Supports steering cable at engine.
Aluminum construction.

Galvanized steel construction. Size: 1/2".

Stainless steel construction. Size: 1/2".

Servo valve block seal kit for all SeaStar power steering cylinders.
#HS5196.

Gland replacement kit includes gland, o-ring, and bleeder tee.
For HC5370 cylinder.

Seal kit for Capilano HC5319, HC5350,
HC5356 and HC5373 inboard cylinders.

Seal kit for Capilano HC5318, HC5349,
HC5355, and HC5369 inboard cylinders.

Seal kit for Capilano HC5362, HC5378,
and HC5379 inboard cylinders.

Seal kit for Capilano HC5351, HC5354,
HC5357, and HC5369, inboard cylinders.

Contains replacement snap rings, O-rings and seals for cylinders with snap ring type
end glands only.
For cylinders HC5340 and HC5394.

Seal kit for all SeaStar 1.7 and 2.4 helm pumps manufactured from 1984 thru 1989.

Seal kit for SeaStar HC5303, HC5312, HC5328, HC5329, HC5330,
HC5331, HC5335, HC5338, and HC5380 steering cylinders.
125 EM MV BJ ATM.
Includes thread locker.

Seal kit for HC5370 & HC5371 cylinders.

Seal kit for SeaStar HC5314, HC5326, and HC5336 steering cylinders.
150 EM MV BJ ATM.
Includes thread locker.

Seal kit for SeaStar HC5313, HC5327, and HC5332 steering cylinders.
135 EM MV BJ ATM.
Includes thread locker.

For use SeaStar HC5340, HC5341, HC5342, HC5343, HC5344,
HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375,
HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754,
& HC6755 front mount outboard hydraulic cylinders.
Includes seal glands, seal gland guide, O-rings & wrench.

Seal kit for Capilano HH0132 (250V), HH0217 (275V),
HH5250 (1250V), and HH5275 (1275V) helms. 

For use SeaStar HC5340, HC5341, HC5342, HC5343, HC5344,
HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375,
HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754,
& HC6755 front mount outboard hydraulic cylinders.     
Includes seal glands, seal gland guide, and O-rings.   
Does not include wrench.  

Shaft seal kit for Baystar 6.1 helm pumps.
Three screws, shaft seal and O-ring.

Spent travel tube for SAFE-T "QC", SAFE-T "TS",
and BIG-T rotary helms.

For MRB75 / 80.

For use with MRB80A actuator. Includes installation diagram.

For use with MRB75A actuator. Includes installation diagram.

For use with MS55L cylinder. Includes installation diagram.

Oil reservoir plug. For use with InstaTrim boat leveler systems. Weight: .01 lb.

Package of 10 quad rings. Part number HS6038.

Rubber construction. O-rings. Thickness: .210". 20 per package.

Female wiring receptacle. Used with Trim Tab boat leveling systems. Weight: .4 lb.

Housing for boat leveler motor and pump. Built from high-impact ABS plastic. Mounts easily with two screws. For use with Trim Tab boat leveler systems. Size: 4-1/2" X 6" X 11" Weight: 1.17 lbs

For MRB50 / 63.

Seal and O-ring kit.                    
For pre-8000 Hynautic H-80 series helms.

Seal and O-ring kit.                    
For post 1979 Hynautic H-40 series helms.

Seal and O-ring kit.                    
For pre-1978 Hynautic H-40 series helms.

Seal and O-ring kit.                    
For post 1979 Hynautic H-20 series helms.