Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 2-3/8". Length: 12.5 feet.

Stainless steel housing and polyester internal parts. Dual 1-1/2" female and 2" male suction and discharge ports. Rated for 3450 RPM.

Dickinson propane connector hose. For use with small and large Sea-B-Que grills. Connects Sea-B-Que grills to standard propane tanks. Eight feet long. Part # 15-189. Weight: 1 lbs.

Dickinson propane connector hose. For use with small or large Sea-B-Que grills Connects Sea-B-Que grills to standard propane tanks. Six feet long. Part # 15-188. Weight: 1 lbs.

Electromagnetic clutch pumps equipped with a powerful electric clutch for convenient remote operation 12 volt model Capable of operating through a wide range of speeds and in either rotational direction 2A Pulley Belt Grooves - 1-1/4" NIPT - 62 GPM Weight: 21.65 lbs

316 stainless steel.
90 degree bend.
Size: 2" NPT.

Can deliver almost 7 GPM at open flow.
Equipped with pressure-cast bronze body.
Features a reusable O-ring type end cover seal.
1/2" internal pipe thread and 1" external hose barb.
Includes 2 port adapter.

Electromagnetic clutch pumps equipped with a powerful electric clutch for convenient remote operation 12 volt model Capable of operating through a wide range of speeds and in either rotational direction 1b Pulley Belt Grooves - 1-1/4" NIPT - 62 GPM Weight: 22.8 lbs

Long life circulation, high efficiency and flow Use for hot and cold water systems, live well and bait tank systems, liquid transfer also windscreen washing 3/4 " NPT or BPS Dimensions: 6" L x 6-1/2" W x 5" H Weight: 4 lbs

Provides high pumping capacity and reliability.
All-in-one pump and intelligent switch.
Designed to activate at 2-1/2" deep water.
Circuit will automatically cycle when needed.
1-1/8" discharge outlet.
12 volts DC.

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 1-1/2". Length: 12.5 feet.

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 1-1/2". Length: 12.5 feet.

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 1-1/4". Length: 50 feet.

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 1-1/8". Length: 12.5 feet.

Built from stainless steel and sturdy plastic. Features dual-heating design, both electrical and indirect. Thermostat is fully adjustable for safety. Uses polyurethane foam heat insulation. 5.81 gallon capacity, 1200 watts. For 120 volt systems.

Cam screws for Jabsco pumps. Pack of three.

Replacement for the Jabsco 7273-0001 impeller. Only impeller able to run dry for 15 minutes Globe impellers are made of Brandonite a high-strength, elastomeric material with self-lubricating compounds for run-dry protection and improved resistance to sand and dirt to help keep you going in the most difficult conditions.

Prevents damage to lines due to rubbing and chafing. Color: Blue. 3" filled. 5" flat.

Prevents damage to lines due to rubbing and chafing. Color: Blue. 2" filled. 3.25" flat.

Uses: Transferring diesel fuel or pumping light oil Vectra rotor and vanes are not affected by petroleum products; pump head is corrosion-resistant bronze. Self-priming up to 5 ft. and delivers up to 8-1/2 GPM Empties a 55 gallon drum in less than 7 minutes Ports: 1/2" internal pipe threads, 1" external hose barb, includes 3/4" external garden hose adaptors High speed motor is thermally protected, complete with 6 ft. power cord. Dimensions: 5-3/4"H x 5-5/8"W x 9-1/2" L Weight: 19.1 lbs

Neoprene impeller for Sherwood 17000 Weight: 1 lb

Chrome plated brass faucet. Includes compression fitting hardware. Integrated 35 psi shutoff pressure switch. Low power consumption (2.5 amps at 12 volt). Quiet operation and self priming.

Electronic water sensor and pump in one housing.
Provides high pumping capacity and reliability.
Circuit will automatically cycle when needed.
1" and 1-1/8" discharge outlets.
Rated for 2000 GPH.
24 volts DC.

Full flow. Bronze construction. Dimensions: 1-1/4" NPT to 1-1/4" hose.

Hose barb rigid male adapter. Brass construction. 5/8" to 3/8". Weight: .1 lb.

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
1-1/2" discharge outlet.
Model number: 14A.
3700 GPH.

304 stainless steel.
Outside diameter (OD): .625".
Inside diameter (ID): .495".
Wall thickness: .065".
Meets ASTM A213/A269 standard.

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
Compact, great for small spaces.
Cycles every 2.5 minutes.
Fully automatic, doesn't require float switch.
High efficiency, low amp motor
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
Model number: 27SA, round.
Three wire.
1100 GPH.
(Replaces RUL27S-3.)

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
Model number: 27DA.
1100 GPH.

An economical multi-purpose air and water hose.
Rubber construction, with a EPDM liner.
Useful for a wide range of industrial applications.
Works great with washdown systems.
Not petrochemical resistant:
- Not for use with hydraulic oil.
- Not for use with fuel oil.
- Not for use with gasoline.
Diameter: 1".
Color: Red.

High quality multi-purpose rubber hose with EPDM liner Great wash-down hose

Investment cast 316 stainless steel Comparable to Jabsco 50070 - 0040 Allows easier removal of flexible impellers from a pump Weight: .9 lb

Designed for washdown or for livewell tanks.
Heavy-duty construction.
Ideal for commercial or pleasure boats.
1-1/2" inlet, 1-1/2" discharge outlet.
Rated for 3700 GPH.
Must be mounted below waterline.
Operates at low pressure; not self-priming.
12 volts DC.

King Nipple - Straight Standard Flow 1/2" NPT x 1/2" or 5/8" hose - Bronze Weight .18 lbs

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
24 volts DC.
1-1/2" discharge outlet.
Model number: 16A.
3700 GPH.

Neoprene. 6 blades. Diameter: 1-1/4".