Black iron.
Dimensions: 3" X 2".

Sea Tech 35 series union connector. Provides an instant zero-leak connection. Manufactured from lead-free high-performance polysulfone. The quick-connect design installs easily, without tools. Size: 3/8" CTS.

Replacement end cover for pump repair. #F4-8007.

PVC construction. Size: 1-1/2" X 1".

Aluminum. Female 1-1/4" to hose.

Replacement cam and wearplate kit. Genuine Jabsco parts for rebuild projects.

Cast bronze. Complete with #1248 key and O-ring. Pipe size: 1-1/2".

Rated for 60 PSI. For 30700 series pumps.

Self-priming flexible flush pump rinses bowl. Macerator scavenger pump removes waste. Built-in backflow preventer is included in discharge. Includes a heavy-duty push-button switch. 1" to 1-1/2" hose adapter for discharge port. All clamps/fasteners to complete conversion (included). Inlet: 3/4". Discharge: 1".

Includes 1-9/16" X 3/4" impeller, lube and hardware.

Specifically designed for the Pacer S-series pump.
Polyester material, corrosion, rust and chemical resistant.
2" threaded inlet and outlet.

Thetford Porta Potti, 550P MSD. An updated design for a clean, modern appearance. Equipped with a lid latch and an ergonomic carrying handle. Features an updated valve handle, fill cap and piston pump. Fresh water tank: 4 gal. Waste water tank: 5.5 gal. Averages about 56 flushes per filling.

Valve gasket for Jabsco 29090. Weight: .2 lb.

The original portable toilet.
This model has a refreshed, modern appearance.
Ergonomic design make it easy to carry and use.
Equipped with an exclusive rotating pour-out spout.
Fresh water capacity: 4 gal. (about 33 flushes).
Waste water capacity: 3.2 gal.
Overall dimensions: 13.27" X 17.13" X 15.36".
Color: Bright white.

Provides an instant zero-leak connection. Manufactured from lead-free high-performance polysulfone. The quick-connect design installs easily, without tools. Size: 3/8" OD X 1/4" NPTF.

Allows air to enter to break siphon. Does not permit air and odors to escape. Assures clog free anti-siphon protection. If used in exhaust system, overboard venting is required. Hose connection: 1-1/2".

Replacement pressure switch for AquaJet water systems. Rated for 40 PSI.

Rated for 75 PSI. For 30700 series pumps.

Aluminum. Female 1-1/4" to MNPT.

Plastic construction.
Garden hose connection.
4-1/2" long.

Cast bronze construction. Designed for easy installation and cleaning. Cast lugs on both sides for mounting. Four outside tie rods. Drain plug to remove sediment. Stainless steel strainer basket helps minimize electrolysis. Hinged lugs on cover for easy cleaning of basket. Pipe size: 1-1/4". Height: 10".

Aluminum. 2" dust cap.

Injection Molded Nylon For 5/8" hose Weight: .05 lb

Used with Jabsco vane pump 45710. Includes seals, impellers, and hardware.

Schedule 80 PVC construction. Diameter: 3/4". Length: 1-1/2".

Bronze construction. Thru-hull fitting with grounding nut. Diameter: 1".

Schedule 80 PVC construction. Diameter: 3/4". Length: 5".

For 2620 and 2630 series Jabsco pumps. Includes impeller, gasket, lip seal.

Cast bronze. Diameter: 2".

Cast bronze. Diameter: 2-1/2".

Black plastic with gasket Built in lock cylinder Weight: .1 lb

PVC construction. Size: 1-1/4" X 3/4".

PVC construction. Size: 1-1/4" X 1".

Machined bronze. Replacement plug for garboard drain.

Brass construction. Tightens with a snap handle. Diameter: 1".

Brass and rubber construction. Diameter: 7/8". Snap lock handle is adjustable to tighten plug. Sized to fit most bait wells.