Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 1-1/8". Length: 50 feet.

13.5" black 3 spoke steering wheel with
center trim cap.
Hard PVC grip.
Beautiful, high-detail styling.
Rugged construction for marine use.
U.V. and corrosion resistant materials.
Stylish center medallion included.
Fits standard 3/4" tapered shaft.
Suitable for mechanical steering.

Hardware kit for Twin S control.

Ideal for inboards, stern drives and outboards.
For single or dual station use.
Controls uses 33C and 43C type cables. Not
suitable for use with Mercury® and OMC® OEM type
control cables. 43C cables require the additional 40
series hardware kit.
Highly polished corrosion resistant stainless steel
covers and handle.
Simple, rugged, compact design.
Mechanical advantage - shift 2.77:1/throttle 2.77:1.
Meets/exceeds all applicable industry standards.
Optional accessories:
- Neutral safety switch to prevent starting in gear.
- Hand lever extension.
- Gear detent kit.
- Additional hardware is required for twin station use.

Single cable clip bracket for use with 33C
throttle and shift cables.

Throttle friction kit for use with S and Twin S controls.
Includes installation instructions.

Single-function control, each lever controls throttle or shift.   
Ideal for inboards, stern drives and outboards.
For single or dual station use.
Highly polished stainless steel cover.
Simple, rugged, compact design.
Easily adjustable throttle friction and shift detent feel.
Mechanical advantage - shift 2.77:1 / throttle 2.77:1.
Uses 33C and 43C type cables.
Meets/exceeds all applicable industry standards.
Optional accessories:
- Neutral safety switch to prevent starting in gear.
- Hand lever extension.
- Shift detent kit (if used in dual stations; use on main station only).
- Throttle hold kit.

Supports steering cable at engine.
Stainless steel construction.

Outboard clamp block kit. Corrosion resistant stainless steel.

For venting bilge gases and fumes.
PVC hose supported by helical wire.
Resistant to ozone, sunlight and weathering.
Will not support a flame.
Diameter: 3".

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 4". Length: 12.5 feet.

Seal kits for SeaStar HC5801, HC5801-2,
HC5802, HC5803, HC5803-2, and HC5804
power steering cylinders.

Seal kit for SeaStar HC5801, HC5801-2,
HC5803, HC5803-2 power steering cylinders.

Single and multiple outboard engine capability.
Unbalanced cylinder with 4.8/5.7 turns lock to lock
(1.7 helm).
Typical applications include center console fishboats
& cruisers.
Side mount, suitable for installation in shallow
splashwells.
Bore: 1.25"
Shaft diameter: .5"
Stroke: 8"
Volume: 8.3 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports.
Seal kit: HP6088  

Fire-retardant marine fuel hose. Resists alcohol-enhanced gasolines. High nitrile rubber construction. Reinforced with two spirals of synthetic fabric. Diameter: 3/8". 250 feet per spool.

Fire-retardant marine fuel hose. Resists alcohol-enhanced gasolines. High nitrile rubber construction. Reinforced with two spirals of synthetic fabric. Diameter: 3/8". 50 feet per box.

A unique variable displacement feature on
this helm allows the number of steering
wheel turns to be adjusted by the helmsman
to their preference within a pre-determined range.
Built-in pressure relief in helm protects system from
effects of thermal expansion.
Displacement adjustment range: 1.7 - 3.4 cu in
1000 psi relief valve setting.
3/4" tapered shaft.
Please note that SeaStar Capilano systems use Dexron II ATF,
not SeaStar steering fluid.

A unique variable displacement feature on
this helm allows the number of steering
wheel turns to be adjusted by the helmsman
to their preference within a pre-determined range.
Built-in pressure relief in helm protects system from
effects of thermal expansion.
Displacement adjustment range: 2.7 - 5.4 cu in
1000 psi relief valve setting.
3/4" tapered shaft.
Please note that SeaStar Capilano systems use Dexron II ATF,
not SeaStar steering fluid.

Allows two clutch or two throttle cables to be connected to a single cable leading aft to the engine.
Ideal for parallel dual station installations when two-lever single function controls are used.
Recommended for installations with long or difficult cable paths to eliminate undesirable
cable bends that cause backlash and reduced efficiency.
For use with 30 series cables.
Includes instructions.

Brass stop collar.
3/32" diameter hole for wire.
For connecting 20 and 30L series cable.
Dimensions: 3/8" X 3/8". 

30 series.
Stud diameter: 5/16".
Lever thickness: 13/32"
Length: 1-1/16".

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 1/2". Length: 12.5 feet.

-5 ORB to 3/8". Tee adapters for hydraulic steering. Two per pack.

Tee fitting.  
#5MORB X 3/8" compression X 3/8" compression.
Two per package.

-5 ORB to 3/8". Tee adapters for hydraulic steering. Two per pack.

1/4" FNPT X #5MORB adapter.
These fittings are made of corrosion resistant stainless steel.
Three per package.

Pin only, for connecting terminal eye to control and slave.
1-1/2” overall length.  
5/16” dia. stud, 19/32" overall length, 1/4-28 threads.
Brass construction.

45˚ adapter elbow.
3/8" compression X #5MORB.
2 per package.

Ball joint with quick release stud.
Plated steel.
For 40 series cable.
1/4" stud.

Ball joint with quick release stud.
Plated steel.
For 60 series cable.
5/16" stud.

Cable clevis, pin, & cotter pin for 60 series control cable.
Pin diameter: 5/16".
Plated steel.

SeaStar/BayStar hydraulic steering fluid is formulated to provide the best performance for your SeaStar/BayStar steering system. A perfect blend of viscosity stabilizers, anti-wear agents and corrosion inhibitors will ensure maximum steering life performance. SeaStar hydraulic steering fluid can be used in Hynautic, BayStar and BayStar Plus steering systems.

Please note that SeaStar Capilano systems use Dexron II ATF, not SeaStar steering fluid.
Kinematic viscosity: 14.1-15.1 @ 40C mm2/s - 15W.
Size: 1 gallon.

Stainless steel replacement lever for
SeaStar CH5400P & CH5600P engine controls.  
Does not include knob.  
Length: 7-3/4”.

Double-ply soft wall, no wire.
For straight connection in wet exhaust systems.
Okay for either gasoline or diesel engines.
Designed for coolant and heat resistance.
Color: Black with blue stripe.
Temperature range: 0° to 212° F.
Diameter: 3-1/2".
Length: 12.5 feet.

Single-lever, dual action - throttle and shift control.  
Surface mount design for easy installation.  
Neutral warm-up capability.  
Includes hardware for two 33C type cables.  
Ball grip for solid feel.  
Rugged and weather-resistant exterior. 

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 1-5/8". Length: 12.5 feet.