45˚ adapter elbow.
3/8" compression X #5MORB.
2 per package.

Ball joint with quick release stud.
Plated steel.
For 40 series cable.
1/4" stud.

Ball joint with quick release stud.
Plated steel.
For 60 series cable.
5/16" stud.

Cable clevis, pin, & cotter pin for 60 series control cable.
Pin diameter: 5/16".
Plated steel.

SeaStar/BayStar hydraulic steering fluid is formulated to provide the best performance for your SeaStar/BayStar steering system. A perfect blend of viscosity stabilizers, anti-wear agents and corrosion inhibitors will ensure maximum steering life performance. SeaStar hydraulic steering fluid can be used in Hynautic, BayStar and BayStar Plus steering systems.

Please note that SeaStar Capilano systems use Dexron II ATF, not SeaStar steering fluid.
Kinematic viscosity: 14.1-15.1 @ 40C mm2/s - 15W.
Size: 1 gallon.

Stainless steel replacement lever for
SeaStar CH5400P & CH5600P engine controls.  
Does not include knob.  
Length: 7-3/4”.

Double-ply soft wall, no wire.
For straight connection in wet exhaust systems.
Okay for either gasoline or diesel engines.
Designed for coolant and heat resistance.
Color: Black with blue stripe.
Temperature range: 0° to 212° F.
Diameter: 3-1/2".
Length: 12.5 feet.

Single-lever, dual action - throttle and shift control.  
Surface mount design for easy installation.  
Neutral warm-up capability.  
Includes hardware for two 33C type cables.  
Ball grip for solid feel.  
Rugged and weather-resistant exterior. 

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 1-5/8". Length: 12.5 feet.

Cable clevis, pin, & cotter pin for 40 series control cable.
Pin diameter: 5/16".
Plated steel.

30 series cable clamp.
Used with 31538 shim.
1" center to center bolt pattern.
Plated steel.

40 series cable clamp.
1" center to center bolt pattern.
Used with 31538 shim.
Plated steel.

30 series.
Stud diameter: 1/4".
Lever thickness: 3/16".
Length: 23/32".

Cable clamp shim for 30 and 40 series control cables.
1" center to center bolt pattern.
Overall dimensions: 1-1/2" X 1/2".
Plated steel.

40 series.
Stud diameter: 1/4".
Lever thickness: 3/16".
Length: 7/8".

Double-ply soft wall, no wire.
For straight connection in wet exhaust systems.
Okay for either gasoline or diesel engines.
Designed for coolant and heat resistance.
Color: Black with blue stripe.
Temperature range: 0° to 212° F.
Diameter: 3".
Length: 12.5 feet.

SeaStar Pro Kevlar reinforced steering hose.  
Includes two hoses - can be used with all
SeaStar systems, except BayStar, Capilano
and 3-line inboard systems.
Factory swaged fittings.
Length: 18'

3/4"  taper to 1" taper steering wheel bushing.  
Brass construction.

3/4" taper to 1" straight steering wheel bushing.  
Brass construction.

Black smooth vinyl cover with a helix. Rated for full vacuum. Resistant to chemicals and saltwater. Primarily used for bilge pump and discharge purposes. Easily bent, OK for below waterline connections. Diameter: 1-1/8".

Heavy-walled FDA-approved vinyl compound. Reinforced with polyester braid. Non-toxic, tasteless, odorless. Red tracer in clear PVC. Appropriate for: - Hot/cold pressurized water systems - Vent and drain lines - Bilge pump discharge. For temperature range: 25° F - 150° F. Rated for a burst pressure of 250 psi. Size: 3/8".

Black smooth vinyl cover with a helix. Rated for full vacuum. Resistant to chemicals and saltwater. Primarily used for bilge pump and discharge purposes. Easily bent, OK for below waterline connections. Diameter: 1-1/2".

Black smooth vinyl cover with a helix. Rated for full vacuum. Resistant to chemicals and saltwater. Primarily used for bilge pump and discharge purposes. Easily bent, OK for below waterline connections. Diameter: 1-1/4".

For use with water drainage. Resistant to chemicals, heat, cold, ozone, saltwater. Temperature range: -40° to -210° F. Color: Black. Diameter: 3/4".

Ball joint with quick release stud.
Plated steel.
For 30 series cable.
10-32 stud.

T-Style handle, 10-32 threads.

Heavy-walled FDA-approved vinyl compound. Reinforced with polyester braid. Non-toxic, tasteless, odorless. Red tracer in clear PVC. Appropriate for: - Hot/cold pressurized water systems - Vent and drain lines - Bilge pump discharge. For temperature range: 25° F - 150° F. Rated for a burst pressure of 250 psi. Size: 5/8".

SeaStar/BayStar hydraulic steering fluid is formulated to provide the best performance for your SeaStar/BayStar steering system.
A perfect blend of viscosity stabilizers, anti-wear agents and corrosion inhibitors will ensure maximum steering life performance.
SeaStar hydraulic steering fluid can be used in Hynautic, BayStar and BayStar Plus steering systems.
Please note that SeaStar Capilano systems use Dexron II ATF, not SeaStar steering fluid.
Kinematic viscosity: 14.1-15.1 @ 40C mm2/s - 15W.
Size: 1 quart.

For use with water drainage. Resistant to chemicals, heat, cold, ozone, saltwater. Temperature range: -40° to -210° F. Color: Black. Diameter: 5/8".

Double-ply soft wall, no wire.
For straight connection in wet exhaust systems.
Okay for either gasoline or diesel engines.
Designed for coolant and heat resistance.
Color: Black with blue stripe.
Temperature range: 0° to 212° F.
Diameter: 4".
Length: 12.5 feet.

Fill and valve assembly for hynautic reservoirs. Manufacturer number: HP6122. Weight: .10 lb.

Adapter kit for Johnson/Evinrude 1973 and later models.
Fits 55 HP through 235 HP outboard motors.  
For use with 33C series cables.
Includes instructions. 

SeaStar aluminum inboard cylinder rod end ball joint.
Stainless steel.
1/2" x 20FNF thread, 1/2" hole.

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 1-1/4".
Color: Black.

OEM direct-replacement control cable. Has a 4" minimum bend radius design. Super-tough HDPE jacketed. Resists abrasion, UV, salt water, petrochemicals. 10-32 threaded ends. Length: 156".