Neoprene. 6 blades. Diameter: 1-9/16".

Sliding Vane Diesel Pump VR050 Diesel Refueling 24V 1" 1" Hose 5-1/4" 5" 8-1/2" 11 Lbs. Continuously rated diesel pump - 13.7 GPM at 10 ft. total head. Self priming up to 9.6 ft. vertical lift. Optional fitted switch, fuse & ports. 22° F to 104° F operating temp range.

Brass construction.

Vented loops are anti-siphon safety devices. For use with both manual and electric marine toilets. Plastic construction. Diameter: 1-1/2". Weight: .2 lb.

Vented Loop 1" Hose Plastic. An essential safety component on all inlet & discharge plumbing of toilets installed below static or heeled water line. Internal valve avoids need for external venting. Fitting connections for 1".

An optimized impeller gives great flow at low amperage. 
A built-in thermal cut-off protects pump and vessel. 
Backflow preventer helps keep bilges dryer and cleaner. 
3/4" discharge outlet. 
Includes both straight and 90° port attachments. 
12 volts DC. 
Model number: 24DA. 
360 GPH.

Replacement part for series 777-0001, 1673-0001.

For Jabsco pumps. Three per bag.

For macerator pump. Includes impeller, gasket, body, and seals.

Compact hinge set For the Jabsco 37010-series electric compact toilet. One pair.

Replacement seal for Jabsco pumps. For 18330 and 18370 series pumps.

Replacement pressure switch for Flojet pumps. Rated for 35 PSI. Fits 4300, 4400 series models.

Inner seal. Used with 11870 series pumps.

Neoprene. 12 blades. Diameter: 3-3/4".

Replacement clutch assembly for Jabsco pumps. "B" style grooves. For use with a 3/4" tapered shaft. 12 volt.

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
1-1/8" discharge outlet.
Model number: 02.
1500 GPH.

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
1-1/8" discharge outlet.
Model number: 04.
1500 GPH.
Includes a five-year warranty from Xylem.

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
1-1/8" discharge outlet.
Model number: 09.
2000 GPH.
Includes a five-year warranty from Xylem.

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
24 volts DC.
1-1/8" discharge outlet.
Model number: 12.
2000 GPH.

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
1-1/8" discharge outlet.
Model number: 10.
2000 GPH.

Garden hose adapter. Plastic. Diameter: 1-1/8".

Plastic. Right angle. Size: 3/4".

High impact plastic construction. Will not rust, corrode or discolor. Designed for use with Rule pumps. Right angle fitting. Size: 5/8".

High impact plastic construction. Will not rust, corrode or discolor. Designed for use with Rule pumps. Size: 2".

Designed for up to 5 fixtures Smooth water flow, pumps over 3.3 GPM Delivers smooth, steady water flow from 1 to 3 GPM without the need for an accumulator tank Special internal bypass feature eliminates pulsating water and pressure switch chatter Install with new Flojet strainer (not included) to protect pump from debris. Dimensions: 3.75" H x 6.3" W x 8.2" L Weight: 3.9 lbs

Controls any pump equipped with an automatic float switch Toggle has 3 positions Automatic/Off/Manual, and a spring return to off position from manual position Black stainless steel panel - 12 Volt Red indicator light - Fuse Holder Weight: .25 lb

Controls any pump equipped with an automatic float switch Toggle has 3 positions Automatic/Off/Manual, and a spring return to off position from manual position Black stainless steel panel - 24/32 Volt Red indicator light - Fuse Holder Weight: .25 lb

Unit features a black plastic panel Built-in fuse holder Internally lighted rocker switch 3 positions: Automatic/Off/Manual with "fail-safe." Spring return to "Off" from manual position. Weight: .2083 lb

Self-priming flexible flush pump rinses bowl. Macerator scavenger pump removes waste. Built-in backflow preventer is included in discharge. Includes a heavy-duty push-button switch. 1" to 1-1/2" hose adapter for discharge port. All clamps/fasteners to complete conversion (included). Inlet: 3/4". Discharge: 1".

Rated for 13 gallons per minute. Self-priming from up to 7.8 feet. 1" hose barb ports. 12 volts.

Replacement seal for Jabsco pumps. For 6400, 6590, 7420, and 11870 series pumps.

Ideal for transferring diesel fuel. Self-priming to about 3 feet. Can pump against a discharge head up to 20 feet. Ideal for moving fuel between port and starboard fuel tanks. 12V DC.

For GM engine pumps. Used with 18330, 18370, 17360 series.