5.98 CID. Load sense / pressure compensated. Right hand rotation. Dual lip front seal. Through drive. 1-1/4 - 14T 4-bolt "C" mount. "A" mount cover. Uses rear pad adapter and sleeve for through-drive operation

5/8" 37° JIC male flare to 37° JIC female flare.
Short sweep.

Open center / cylinder spool. 20 GPM rated flow. 3625 PSI maximum work pressure. P, A and B ports #10 SAE-O-ring. T port #12 SAE O-ring. Friction hold. Nickel plated spool.

Load sense.
Counterclockwise rotation.
Not torque limiting.
Displacement: 6.4 cubic inches.
Front drive flange: SAE C 4-bolt.
Rear drive flange: SAE C 4-bolt.

Post-pressure compensated sectional valve. 
Designed specifically for mobile applications. 
Provides controllability, efficiency and flexibility 
for applications requiring up to 160 liters per minute. 
Adds the benefit of Flow Sharing technology. 
DPX valves are highly configurable 
with multiple inlet and outlet ports on each cover. 
Manually actuated, friction spool. 
15 GPM. 
#10 SAE ORB Work ports. 

Open center / cylinder spool. 20 GPM rated flow. 3625 PSI maximum work pressure. P, A and B ports #10 SAE O-ring. T port #12 SAE O-ring. Spring to neutral. Nickel-plated spool.

Aluminum construction.
Stainless steel handle.

Open center / cylinder spool.
20 GPM rated flow.
3625 PSI maximum work pressure.
P, A and B ports #10 SAE O-ring.
T port #12 SAE O-ring.
1 spring to neutral, 1 friction.
Nickel-plated spool.

1/8" male national pipe thread.
Brass body and handle.

1/4" male national pipe thread. 
Brass body and handle.

3/8" male national pipe thread. 
Brass body and handle. 

Hydro-slave bulkhead pot hauler. Equipped with a 1008 Char-Lynn motor. Complete with extra heavy anodized cast aluminum housing. - Stainless steel discs. - Cadmium-plated disc liners. - Stainless steel center hub and splitter. - Aluminum fairlead rollers with stainless steel shafts. Ports are 1/2" NPTF with 45° hydraulic fittings. Provides 1025 lbs. line pull, 10 RPM per gallon.

Thick shim. For 12" or 14" haulers.

Thin shim. For 12" - 14" hauler.

For use with splitter.

Cork. For use with 12" hub cap.

Cork. For use with 10" hub cap.

Stainless steel. For 10" - 12" block.

1/8" FNPT X 1/8" FNPT. 
Brass body, steel handle. 
Maximum working pressure 150 PSI. 

Plated steel. #10 female JIC to #12 male JIC.

Post-pressure compensated sectional valve inlet cover. 
Designed specifically for mobile applications. 
Provides controllability, efficiency and flexibility 
for applications requiring up to 160 liters per minute. 
Adds the benefit of Flow Sharing technology. 
DPX valves are highly configurable 
with multiple inlet and outlet ports on each cover. 
Maximum inlet flow: 32 GPM. 
Maximum inlet pressure: 4350 PSI. 
Maximum outlet port back pressure: 145 PSI. 
Pressure ports: #12 SAE ORB. 
Return ports: #12 SAE ORB. 
Load sense port: #4 SAE ORB. 

Walvoil valve handle.
Length: 8".

Post-pressure compensated sectional valve outlet cover. 
Designed specifically for mobile applications. 
Provides controllability, efficiency and flexibility 
for applications requiring up to 160 liters per minute. 
Adds the benefit of Flow Sharing technology. 
DPX valves are highly configurable 
with multiple inlet and outlet ports on each cover. 
Maximum inlet flow: 32 GPM. 
Maximum inlet pressure: 4350 PSI. 
Maximum outlet port back pressure: 145 PSI. 
Pressure ports: #12 SAE ORB. 
Return ports: #12 SAE ORB. 
Load sense port: #4 SAE ORB. 

Bulkhead fitting.
Stainless steel.
#12 compression fitting to #12 compression fitting.

Open center / cylinder spool. 20 GPM rated flow. 3625 PSI maximum work pressure. P, A and B ports #10 SAE O-ring. T port #12 SAE O-ring. Spring to neutral. Nickel-plated spool.

Bolt kit for 3-section Walvoil valve.

Bolt kit for 4-section Walvoil valve.

5/8" 37° JIC male flare to 37° JIC female flare.
Short sweep.

For use with a single section Walvoil valve.

Bolt kit for 2-section Walvoil valve.

High-pressure shaft seal offers superior seal life and performance, and eliminates the need for case drain.
Heavy-duty drive link is the most durable in its class and receives full-flow lubrication to provide long life.
Valve-in-rotor design provides cost effective, efficient oil distribution and reduces the overall motor length.
Pressure-compensated balance plate improves volumetric efficiency at low flows and high pressure.
- 18.3 CID
- 1-1/4" straight keyed shaft
- 2-bolt SAE-A flange (4 bolt magneto mount)
- #10 SAE ORB
- Free-turning motor.

Hydro-slave pot hauler block. Equipped with a 1008 Char-Lynn motor. Complete with extra heavy anodized cast aluminum housing. - Stainless steel discs. - Cadmium-plated disc liners. - Stainless steel center hub and splitter. - Aluminum fairlead rollers with stainless steel shafts. Ports are 1/2" NPTF with 45° hydraulic fittings. Provides 1025 lbs line pull, 10 RPM per gallon.

Hydro-slave pot hauler block. Equipped with a 1006 Char-Lynn motor. Complete with extra heavy anodized cast aluminum housing. - Stainless steel discs. - Cadmium-plated disc liners. - Stainless steel center hub and splitter. - Aluminum fairlead rollers with stainless steel shafts. Ports are 1/2" NPTF with 45° hydraulic fittings.

Hydro-slave pot hauler block. Equipped with a 1004 Char-Lynn motor. Complete with extra heavy anodized cast aluminum housing. - Stainless steel discs. - Cadmium-plated disc liners. - Stainless steel center hub and splitter. - Aluminum fairlead rollers with stainless steel shafts. Ports are 1/2" NPTF with 45° hydraulic fittings. Provides 600 lbs line pull, 22 RPM per gallon.

Plated steel. #12 female JIC to #16 male JIC.